50-850 Tph Jaw Crusher for Aggregates Crushing Plant

Aggregates Crushing Plant introduction:

Aggregates Crushing Plant are typically used as primary crushers, or the first step in the process of reducing rock. They typically crush using compression. The rock is dropped between two rigid pieces of metal, one of which then move inwards towards the rock, and the rock is crushed because it has a lower breaking point than the opposing metal piece.
small gold crushers movement is obtained by using a pivot point located at one end of the "swing jaw", and an eccentric motion located at the opposite end.


Aggregates Crushing Plant working principle:

The motor transmits power through belt, drives the moving jaw to do periodic motion towards the fixed jaw by the eccentric shaft. The angle between toggle plate and moving jaw plate increases when moving jaw moves . So the moving jaw moves towards the fixed jaw. The stuff will be crushed in this process. The angle between toggle plate and moving jaw decreases when moving jaw moves down, the moving jaw moves leaves fixed jaw by pulling rod and spring, the final crushed stuff will be discharged from the outlet.

  
Aggregates Crushing Plant composition-structure:

It is made up of frame, eccentric shaft, grooved wheel, flywheel, moving jaw, side guard plate, toggle plate, toggle backseat, adjusting screw, returning spring, fixed jaw plate and moving jaw plate. Toggle plate is of safety function.


Application of Aggregates Crushing Plant
 
1). Simple structure and reliable operation
2). Easy maintenance and low operating cost
3). The frame of jaw crusher is very firm due to removing welding residual stress
3. Jaw crusher composition-structure



It is made up of frame, eccentric shaft, grooved wheel, flywheel, moving jaw, side guard plate, toggle Plate, toggle backseat, adjusting screw, returning spring, fixed jaw plate and moving jaw plate. Toggle plate is of safety function. 


Aggregates Crushing Plant technical data: