New type Diesel Engine Rock Crusher for Gold Ore

Rock Crusher for Gold Ore introduction:

Rock Crusher for Gold Ore are typically used as primary crushers, or the first step in the process of reducing rock. They typically crush using compression. The rock is dropped between two rigid pieces of metal, one of which then move inwards towards the rock, and the rock is crushed because it has a lower breaking point than the opposing metal piece.

Rock Crusher for Gold Ore movement is obtained by using a pivot point located at one end of the "swing jaw", and an eccentric motion located at the opposite end.


Rock Crusher for Gold Ore working principle:

The motor transmits power through belt, drives the moving jaw to do periodic motion towards the fixed jaw by the eccentric shaft. The angle between toggle plate and moving jaw plate increases when moving jaw moves . So the moving jaw moves towards the fixed jaw. The stuff will be crushed in this process. The angle between toggle plate and moving jaw decreases when moving jaw moves down, the moving jaw moves leaves fixed jaw by pulling rod and spring, the final crushed stuff will be discharged from the outlet.


Features of Rock Crusher for Gold Ore:
 
1. Big feeding granularity and breaking ration, large capacity.
2. Rock Crusher for Gold Ore opration is stable and reliable, fixed with over-loading protective device.
3. Low energy consumption , little spare parts, low maintenance cost.
4. Adjusting parts are reinforced emphatically and finish machining, reduce repair frequence.
5. Rock Crusher for Gold Ore has axle bearing adopts with Multi-storey labyrinth seal, prolonging operation life.
6.Using modules lubrication, more easier and convenient for maintenance.
7.Adopting belt pulley new locking craft, keyless connection, making mainenance more convenient.
 
Application of Rock Crusher for Gold Ore:
 
Rock Crusher for Gold Ore can reach the crushing ratio of 4-6 and the shape of final product is even. They are widely applied to crush high hardness, mid hardness and soft rocks and ores such as slags, construction materials, marble, etc. The pressure resistance strength is under 200Mpa, that is, suitable for primary crush. They can be used in mining, metallurgical industry, construction, road and railway building, conversancy, chemistry, etc.



Rock Crusher for Gold Ore technical data: