The type of bent glass washing machine come with brush which can wash the glass totally. It is for washing bent glass (normal one or coated one). It is usually placed  after  loading line and before PVB assembly line. It can also be placed after PVB trimming and before final inspection
 

Main technical specifications

Glass size: Max 1850 x 1250 mm Min 900 x 600 mm
Thickness: 1.6-3.2mm
Working height: 1000±50mm(off ground)
Glass flow: Cross feed/ Wing down
Depth of bend: Max 300mm, Min 50mm
Cross curvature: 0-50mm
Conveying  speed: 3-16m/min   adjustable
Drying speed: 12m/min

Main Functions 
Remove dust, glove print, pressure mark, etc, dry thoroughly to get glass ready for laminating or final inspection

Main features
Two parallel Fenner V belts are used for conveying.
Sensors are installed at the inlet and outlet of the washing machine to detect the entry and output of the glass. When glass is not in and out within a certain period of time, pumps stop to save power.
ashing room is designed as a sealed room to allow better control of water (avoid splashing out).
The frame and all parts direct or indirect contact with water are made of stainless steel (material 304).
There are Stainless steel doors (height 2.1mm) with windows (made of laminated glass) at both sides of washing shell which can be open to allow inspection, adjustment and maintenanc

First pair of brushes design: split to two section - Middle shaft and side cylindrical bristle-liftable and height adjustable
Second pair of brushes design: split to two section - Middle shaft and side conical bristle-liftable and height adjustable

Final spray section directly connected to customer's De-ionized water supply for rinsing before enter drying section.
Drying section is provided with serval groups of drying air knives depending on dry speed.
The drying section is equipped with a stainless steel sealed room. It is design as a whole to get better control of air pressure.
There are stainless steel doors with windows (made of laminated glass) at both sides of drying shell which can be open to allow inspection, adjustment and maintenance
 

The angle adjustment of air knives on both sides is controlled by motor, which is convenient for angle adjustment. 
Fan chamber includes air distribution room, fan room and air temperature adjustment device.
Fan equipped with an inverter. According to the inflow of glass, the fan can be turned on or work in lower speed to reduce energy consumption.
The air inlet of fan room is equipped with a pre-filter and a bag filter. Cleanliness of bag filter can be controlled by a differential pressure controller.