Products

CNC-SRM120X3000 CNC screw rod milling machines

China CNC-SRM120X3000 CNC screw rod milling machines, Find details about China screw rod milling machine, screw rod cutting machine from CNC-SRM120X3000 CNC screw rod milling machines

Model NO.
CNC-SRM120x3000
Trademark
Songen
Specification
120x3000 mm
Origin
China
Model NO.
CNC-SRM120x3000
Trademark
Songen
Specification
120x3000 mm
Origin
China
  1. Various kinds of screws rods such as plastic extruder screw rods, worm shafts, screw pump rotators with equal or different pitches, slot depths can be produced on this machine;
  2. Servo motors are furnished for the spindle, the longitudinal-feeding ball screw and the cross-feeding ball screw. The spindle, the longitudinal feeding and the cross feeding can perform simultaneous motions under the controls from the Fanuc 0i-M controller fitted on this screw rod milling machine;
  3. One-piece machine base for this screw rod milling machine. Bed ways are hardened with high-frequency quenching and precision ground to enjoy long term service life. Guide ways on the carriage are plastic coated to obtain minimal friction coefficient to enable the carriage to move very stably along the bed ways;
  4. Milling head offers mechanical 2-gear speed changing, with infinitely variable speeds within each gear;
  5. Roughness achieved to be Ra 3.2μm. Pitch tolerance is less than 0.06mm/300mm.
Specifications
No.SpecificationsModel CNC-SRM120x3000
1Centers distance3000 mm
2Effective cutting length2500 mm
3Maximum outer diameter of workpieces120 mm
4Bed width600 mm
5Spindle speeds (stepless)0.1-9 RPM
6Spindle bore diameter70 mm
7Installation mode of milling headFront mounted and horizontal feeding
8Milling cutter spindle bore taper45# (7:24)
9Milling cutter arbor taperMT #2 or MT #3
10Milling head spindle speeds50-225 RPM, Stepless;
100-450 RPM, Stepless.
11Milling head motor4 KW, VFD Motor
12CNC controlled axesX, Y, C
13Minimum setting length unit on CNC0.01 mm
14Minimum setting angle unit on CNC0.01 Degrees
15CNC controlling precisionControlling precision is less than the movement activated by one impulse
16Tailstock quill diameter100 mm
17Rapid traverse speed4000 mm/Minute for longitudinal direction;
3000 mm/Minute for cross direction.
18Chip removalManual removement
19Machine net weight6000 KG
20Package size6500x1650x2200 mm (LxWxH)
21CNC controllerFanuc 0i-M

You Might Also Like