Small output alfalfa in malaysia rice husk feed extruder

  Small output rice husk feed extruder, the pellets that the machine produced with high hardness, smooth surface and internal curing degree more fully improved nutrients absorbing and can kill general pathogenic microorganism and parasite, available in a variety of aperture diameter of 2-10mm die adapt to different material granulation, curing fully, improves digestion and absorption rate.

  Small output rice husk feed pelletizing machine mill, is widely used to produce feed pellets and biomass fuel pellets, wide application range: any kind of biomass materials containing wood fiber, such as peanut shell, bagasse, castor shell, straw, sawdust, coffee grounds, rice husk, sunflower shell, cotton stalk, tobacco residue, leaf mustard stalk, bamboo, jute residue, tea residue, wheat-straw, palm shell, bean shell, coconut shell, dregs of decoction, and wood waste, etc.

Features of Small output rice husk feed extruder

1) Small output alfalfa in malaysia rice husk feed extruder.

2) The specifications of pellet can be adjusted by changing dies with different diameters and compression ratios.

3) The pellets have smooth surface, suitable density and higher curing degree.

4) This machine can make starch pasting, protein coagulating or denaturizing, and improve the nutritional quality of feed pellets, which is easy to digest and absorb, meanwhile kill the pathogenic germ and parasite.

5) The pellet machine has a compact structure, flexible movement and convenient operation, and four tires can be installed at the bottom of the particle machine.

6) Widely used, this pellet mill is not only used for feed and animal husbandry industry, but also used for fertilizer and biomass energy. it can be used for cattle, horses, sheep, livestock etc,chicken, pig, rabbit, duck, goose, fish, ostriches, camels, dove small plant breeding feed factory, and animal manure, sludge, biogas residue as organic fertilizer,inorganic fertilizer,compound fertilizer and other fertilizer granules.

7) Spare parts are easy to change, less cost for roller and dies.

How to make your own pellets with our Small output alfalfa in malaysia rice husk feed extruder

The complete pellet making production line is composed the following steps.

Step1:Crushing

1) Before raw materials are made into biomass pellets of pellet machine, they are firstly reduced into smaller, uniform- sized particles. When the thickness is larger than 6 mm or size is greater than 50*50 mm, a pellet machine is needed to chip these materials into smaller pieces.

Step2:Drying

2) After all the raw material of pellet machine are crushed, dryer will be needed since for the most raw materials have the moisture content of about 50%.However, in general the optimal moisture content for pelletiztion is 10%-15%. Therefore, a rotary dryer is included in the pellet machine to reduce the moisture content.

Step3:Pelletizing

3) After crushing and drying all the raw materials properly, it is ready for the pellet machine. The pellet machine or press is the key piece of machine in the pellet plant. Pellet machine should be mentioned that impurities for the raw materials just like metal or stone, may damage the die and rollers of pellet machine.

Step4:Cooling

4) Usually after pelletizing, the temperature of pellet can reach almost 60-80 degrees, and also the moisture content is close to 15%. For storage purposes, a cooler must be used to reduce the surface temperature and moisture content.

Step5:Packing

5) Finally is the packing process of pellet making line. Inorder to protect the pellets from getting damaged and to increase storability, proper packing is necessary.