Product Description
High Efficiency reinforcing mesh welding machine
1). This kind reinforcing mesh welding machine is our latest developed reinforcing mesh welding machine.
2). The line wire and the weft wire are pre-straight and pre-cut. The line wire is feeding by theservo motor, pulling the wire net by the servo motor automatically.
3). The welding power comes from the spring. It is easy to control the welding pressure.
4). The weft wire feeding from the multi hopper which capacity is 1.5t, more over ten times than the traditional hopper.
5). The new reinforcing mesh welding machine added the bear wire net and carries equipment that makes the working more convenience. The welding part is used the springiness input wire trunking that makes the welding copper use for long time.
6). 120KVA Transformer with water cooling system and separately welding controller.
7). This reinforcing mesh welding machine adopts synchronous control technique.
Wire diameter | 5-12mm | Line wire form | pre-cut wire |
| Weft wire distance | 100-300mm | Weft wire form | pre-cut wire |
| Line wire distance | 100-300mm | Rated voltage | 380V 50HZ |
| net width (customized) | 2500mm | Rated power | 120KVA X 13 sets |
| Welding speed | 60times/min | Overall dimension | 6.0X 5.5 X 2.65m |
| welding electrodes | 26 group | Max. mesh length | 6m(adjustable) |
Electrical control system: Uses PLC programmable controlling, Other parts all is famous brand. Using a unique electrical operating system, with a failure alarm function, the touch screen display can intuitively see welding parameters, is easy and fast for operation. Thus reduce the requirements on the operator.
Cooling water system: Is divided into transformers cooling, up electrode cooling, lower electrode cooling and other copper block cooling. It come true the water distribution by flowmeter. Each flowmeter can be adjusted individually to make machine working normal, without damage.
Gas source system: Equipment is installed air processor which is used for clean the compressed air, and with muffler to reduce the noise. Also it is with compressed air tank to stabilize the air pressure.
In order to give you one accurate quotation sheet,please supply us more of your requirements as below:
1.wire diameter range
2.mesh width
3.panel length
4.mesh opening size
5.industrial votalge/frequency
If you have any interest in wire mesh fence panel welding machine or other wire mesh machine products,please feel free to contact with us.