Fully Automatic Pneumatic Wire Mesh Machine(GWC-2500-Q)
Performance characteristics:
New CNC automatic welding machine with nc synchronous control technique, welding time and control welding time of digital programming system by PLC, touch screen or keyboard input panel for two, more intelligent operation, rationalization. Fence welding machine using a pressure, welding points in time, the control of the biggest advantage is: Can appear on the same net between warp and weft more than 30 different mesh size. Welding using new efficient water-cooling welding transformer, and expand the scope of welding wire diameter. Easy operation, high flexibility, production is several times of artificial single spot welding machine.
Performance characteristics:
Cross Wire Feeding Unit(pre-cut)
it is installed on the upper of the mesh grid set device.it consists of walking platform,cross wire stacking unit,wire distrbution device and wire feeding device.
The distribution device and the wire feeding are driven by pneumatic system under the operation by electrical control system.
Automatic cross wire feeding without the need for manual labor. it is designed for the cross wire is fed from pre-cut wire
Welding System
Welded system is made up of the rack,welding transformer,pressurized cylinder,upper electrode combination,lower electrode combination,cross wire magnetic locator,lift mesh unit,line wire bracket combination,pneumatic system,water cooling system and others spare parts.
Welding materal:cold rolled wire,cold rolled round wire,hot rolled wire.
Mesh Pull Out System
it consists of blanking plate,gantry,chain link mesh netting machine and convey car(or roller guide),the flipper(stacker-turner)is optional part.
Max length of wire mesh:6000mm.
CNC Mesh Position Unit
Mesh position unit usage is feed forward the welding mesh,at the same time ensure the line wire spacing in need,which adjust cross line spacing according to the automatic setting.
CNC mesh position system can adjust the cross wire spacing automatically,and can save the data in the system, it is easy,convenient and accuracy to adjust the cross wire spacing.
Line Wire Straightening Table
16 set straightening units for line wire.(based on the mesh width is 2400mm,mesh opening is 150*150mm).
May change the line wire diameters without replacing straightening rolls.
The main technical parameters
Model | GWC-2500-Q | Welding speed | 40-60 times/min |
| Wire diameter | 3.0-6.0mm | Rated power | 220KVA |
| Longitude wire space | 50-300mm | longitudinal wire feeding | Wire rod wire feeding |
| Cross wire space | 50-300mm | Cross wire feeding | Pre- straightening & pre-cut |
| Mesh width | Max.2500mm | Overall Size | 6*3.1*1.7m |
| Welding points | 25 | Length wire net | adjust |
In order to give you one accurate quotation sheet,please supply us more of your requirements as below:
1.wire diameter range(3-5mm or 4-8mm).
2.mesh width(2000mm,2500mm,3000mm).
3.mesh opening size(50mm,100mm,200mm,300mm).
4.mesh length(According to your needs).
5.industrial votalge/frequency(The standard is 380V 50HZ).
If you have any interest in wire mesh fence panel welding machine or other wire mesh machine products,please feel free to contact with us.