Products

Miran Mtl2-30-5000mm Magnetostrictive Displacement Transducer Flange Type Liquid Level Sensor

China Miran Mtl2-30-5000mm Magnetostrictive Displacement Transducer Flange Type Liquid Level Sensor, Find details about China Magnetostrictive Sensor, Magnetostrictive Displacement Transducer from Miran Mtl2-30-5000mm Magnetostrictive Displacement Transducer Flange Type Liquid Level Sensor

Model NO.
MTL2
IP Rating
IP68
Certification
CE CCC RoHS ISO
Customized
Customized
Item
Mtl2
Measurement Stroke
50mm-5000mm
Delay
≤0.001%Fs
Resistance
1-3kohm
Resolution
≤0.001%Fs
Repeatability Precision
≤0.0005%Fs
Temperature
-20ºC~+125ºC
Very Long Life
>100*1000000 Cycles, >25*1000000
Power Supply
+15VDC-24VDC
Output Signal
0-5VDC 0-10VDC 4-20mA RS485
Trademark
MIRAN
Transport Package
Each Piece Is Packed in a PVC Tube with Foam
Specification
Aluminium Case
Origin
China
HS Code
8543709990
Model NO.
MTL2
IP Rating
IP68
Certification
CE CCC RoHS ISO
Customized
Customized
Item
Mtl2
Measurement Stroke
50mm-5000mm
Delay
≤0.001%Fs
Resistance
1-3kohm
Resolution
≤0.001%Fs
Repeatability Precision
≤0.0005%Fs
Temperature
-20ºC~+125ºC
Very Long Life
>100*1000000 Cycles, >25*1000000
Power Supply
+15VDC-24VDC
Output Signal
0-5VDC 0-10VDC 4-20mA RS485
Trademark
MIRAN
Transport Package
Each Piece Is Packed in a PVC Tube with Foam
Specification
Aluminium Case
Origin
China
HS Code
8543709990
Product Description


Miran MTL2 Flange Type Magnetostrictive Liquid Level Sensor

Attention:The stroke can be customized in 30mm-5000mm. There are several signal output can be choosen, which are 0-5v 0-10v 4-20ma, RS485. The stroke and output signal can be customized

The principle of MTL2 magnetostrictive displacement sensor is to generate a strain pulse signal when two different magnetic fields intersect, and then calculate the time period required for the signal to be detected, so as to convert the accurate position. One comes from a permanent magnet in the magnetic ring and the other from an excitation pulse generated by an electronic component in the sensor's electronics chamber. The excitation pulse travels at the speed of sound along the wave guide wire made of magnetostrictive material inside the sensor. When it intersects the permanent magnetic field in the magnetic ring, the mechanical vibration generated by the wave guide wire forms a strain pulse due to the magnetostriction phenomenon. The strain pulse is soon detected by the sensor circuit in the electron chamber. The MTL2 magnetostrictive displacement sensor can accurately calculate the position change of the magnet from the moment when the excitation pulse is generated to the total time when the strain pulse is detected multiplied by the fixed speed of sound. The process is continuous, so whenever the position of the magnetic ring changes, the new position is quickly measured. Because the output signal is a real value, rather than a proportional or re-amplified signal, there is no signal drift or change in value, let alone the need for periodic rescaling like other sensors.

Miran Mtl2-30-5000mm Magnetostrictive Displacement Transducer Flange Type Liquid Level Sensor
MTL2 Specifications:
Stroke Length (mm)80100110125130150175200225250275300325350360375400425450475500
Length A (mm)242262272287292312337362387412437462487512522537562587612637662
Length B (mm)172192202217222242267292317342367392417442452467492517542567592
Linearity≤0.05%FS
Repeatability≤0.0005%FS
Resolution≤0.001%FS
Lag≤0.001%FS
Temperature Drift≤0.001%/ºC
Working Voltage+15VDC-24VDC
Working Current≤16mA (voltage output);   ≤35mA (current output), change along with displacement
Vibration3g, 25Hz, GB/T2423.10 (Vibration Test);  10g, 100Hz, GB/T2423.5 (Bump Test)
TemperatureT1: -20~+55ºC;   T2: -40~+85ºC;   T3: -50~+125ºC;
Load CharacteristicResistance≥3KΩ (voltage output);   Resistance≤1KΩ (current output)
Output Signal0~5VDC;   0~10VDC;   0~20mA DC;   4~20mA DC,RS485
                      
Stroke Length (mm)550600650700750800850900950100011501250145015001600180020002250250027503000
Length A (mm)712762812862912962101210621112116213121412161216621762196221622412266229123162
Length B (mm)6426927427928428929429921042109212421342154215921692189220922342259228423092
Linearity≤0.05%FS
Repeatability≤0.0005%FS
Resolution≤0.001%FS
Lag≤0.001%FS
Temperature Drift≤0.001%/ºC
Working Voltage+15VDC-24VDC
Working Current≤16mA (voltage output);   ≤35mA (current output), change along with displacement
Vibration3g, 25Hz, GB/T2423.10 (Vibration Test);  10g, 100Hz, GB/T2423.5 (Bump Test)
TemperatureT1: -20~+55ºC;   T2: -40~+85ºC;   T3: -50~+125ºC;
Load Characteristic≥3KΩ (voltage output);   ≤1KΩ (current output)
Output Signal0~5VDC;   0~10VDC;   0~20mA DC;   4~20mA DC,RS485, Modbus

Miran Mtl2-30-5000mm Magnetostrictive Displacement Transducer Flange Type Liquid Level Sensor
Built-in installation method:

1. Screw the MTL2 sensor into the M18×1.5 mounting hole, and pay attention to the sealing surface of the "O" ring as shown in the figure.
 
2. According to the position of the magnetic ring, four threaded holes are drilled on the self-made piston, and the magnetic ring is fixed with an inner hexagon screw M4×10. The screw head is toward the electronic bin side of the sensor; The magnetic ring should be concentric with the measuring rod as far as possible, but the eccentricity of the magnetic ring has no effect on the measuring accuracy. If vibration is involved, it is recommended to add a PTFE guide sleeve between the magnetic ring and the piston.

3. If the piston is made of magnetic conductive material, a non-magnetic gasket shall be installed between the magnetic ring and the piston.



External installation method:

For sensors with a measurement range of less than 1000mm, it is recommended to install accessories; If the size is larger than 1000mm, the rod support shall be used for installation.

1. Truck the sensor with the level sensor bracket and fix the bracket to the sensor thread with the lock nut.

2. The magnetic ring is fixed on the magnetic ring bracket with an inner hexagonal screw M3×12. When the magnetic ring is installed on the measuring rod, the head of the screw should be toward the side of the electronic bin. The magnetic ring should be as concentric as possible without contact with the measuring rod, but a slight eccentricity of the magnetic ring will not affect the performance of the sensor.

3. Wrap the retaining strip tightly around the end of the measuring rod and secure it with two M3×8 screws and two M3 nuts.

Note: only one fixed lath is provided for the installation attachment, which should be fixed within 50mm from the end of the measuring rod; The attachment has three fixed lats. The installation method is as follows: one is fixed within 25mm from the end, and the other two are evenly distributed on the measuring rod.

4. Finally, the entire sensor installed according to the installation requirements with self-made screws can be fixed.

 

MTL2 Flange Mounted Magnetostrictive Displacement/Level Sensor Application:

Servo hydraulic oil cylinder piston position presets and feedback, and feedback, servo cylinder piston position preset position of grinding machines preset and feedback, casting forging machine tool preset position and feedback, provisioning and other machinery, such as gantry machine tool position feedback, boring machine, the position of shield machine, the coal mining machine oil cylinder presets and feedback, project promotion machine oil cylinder position presets and feedback, rolling mill andfeedback, such as steel mills machine oil cylinder position preset provisioning and bottle blowing machine oil cylinder position feedback, injection molding machine oil cylinder position presets and feedback, the adjustment of the railways, Bridges, water level detection, sluice control, wood mechanical position presets and feedback, The position presetting and feedback of the oil cylinder level, the position presetting and feedback of the chemical container level, the position presetting and feedback of the drinking water and sewage treatment system, the geodetic system, the position presetting and feedback of the gate opening, the
measurement of the oil cylinder level.

 


Company Profile

Miran Industry Zone
Miran Mtl2-30-5000mm Magnetostrictive Displacement Transducer Flange Type Liquid Level Sensor
Miran Mtl2-30-5000mm Magnetostrictive Displacement Transducer Flange Type Liquid Level Sensor
Miran Mtl2-30-5000mm Magnetostrictive Displacement Transducer Flange Type Liquid Level Sensor

Certificate Room
Miran Mtl2-30-5000mm Magnetostrictive Displacement Transducer Flange Type Liquid Level Sensor

Trade Show
Miran Mtl2-30-5000mm Magnetostrictive Displacement Transducer Flange Type Liquid Level Sensor
Miran Mtl2-30-5000mm Magnetostrictive Displacement Transducer Flange Type Liquid Level Sensor

 

My Dear Friends,welcome to visit our company!

 

Shenzhen Miran Technology Co., Ltd. is the largest Linear Position Sensor manufacturer in China.

Since 2003 we have been developed and produced Linear Position Sensor(brand:MIRAN,LinecSKI,WANSUNGM),Wire Rope Potentiometer,Magnetostrictive Liquid Level Sensor,Angle Sensor,Lubricating Pump(Oil/Grease/Butter),LVDT,Eddy Current Sensor, and many other Motion control products to support many different industries.

Our Products have been widely used in injection molding machines,die casting machines,rubber machines,footwear machines,EVA injection machines,bottle blowing machines,woodworker machines, hydraulic machinery,level control, suspension stroke control,construciton machinery,seaport machinery,industrial robots,etc.

 

We can offer you the competitive advantage products.

We also support to put your logo on the products if you need.

 
Please find the product you need and confirm the order.
If you cannot find what you need,please leave a message with your email or 
 

 

Hope we can build up the long-term and harmonious business relationship!
Wish you have a happy shopping and visit us again!

You Might Also Like