Specification

32-bit reduced instruction set computer (RISC) architecture

On-chip, 16K Bytes of static random-access memory (SRAM):

Single cycle byte, half-word (16-bit), and word (32-bit) reads and writes

On-chip, 16K Bytes of static read only memory (ROM):

Single cycle byte, half-word (16-bit), and word (32-bit) read access.

On-chip 256K Bytes embedded flash (EFLASH)

USB Controller:

USB 2.0 Compliant with on-chip integrated PHY module

Certified for High Speed (480MHz) USB and Full Speed (12MHz) USB

UTMI+ Level 2 transceiver interface

Supports eight transmit/receive

endpoints(ep0,ep1,ep2,ep3,ep4,ep5,ep6,ep7)

Aes, RSA, Des Jet   Fast to visit Ultralgith® C, MIFARE Plus® cards

NXP RC522 or RC523 Reader IC, support TYPE A  Or TypeA&TYPE B

Technical

Power supply: 3V or 5V, 40-80mA

Interface: UART ,USB HID ,USB virtual RS232 , USB CCID,  USB emulation Keyboard Options;

Transmission speed: Default 19200 bps

R/W distance of up to 60mm ~ 100mm ,depending on TAG and Antenna Size.

Storage temperature: -40 ºC ~ +85 ºC

Operating temperature: -25 ºC ~ +70 ºC

CR013A Plus  TYPE A support  MIFARE® 1k ,4k,Ultralight® ,Ultralight® C, Ntag serial,

Sle66r01P, MIFARE  Plus® ,MIFARE DESFire® Pipe mod , C =TL 14443-4

CR013B Plus TYPE B C=TL 14443-4  

Communication setting

The communication protocol is byte oriented. Both sending and receiving bytes are in hexadecimal format. The communication parameters are as follows,

Baud rate: 19200 bps (default,  4800 ~ 115200 volatile Setting)

Data: 8 bits

Stop: 1 bit

Parity: None

Flow control:     None

Dimension  41×18(mm) Note : The module's pin same as DIP32

PIN

Character