Products

New Type Ridge Cap Roll Forming Machine

China New Type Ridge Cap Roll Forming Machine, Find details about China Roll Machine, Forming Machine from New Type Ridge Cap Roll Forming Machine

Model NO.
YX113 Rolling Machine
Feeding Width
500mm
Effective Width
400mm
Thickness
0.4-0.6 mm
Hydraulic Group Power
4kw
Trademark
Xiamen Liming
Transport Package
40gp*1
Specification
12T
Origin
Fujian, China(Mainland)
Model NO.
YX113 Rolling Machine
Feeding Width
500mm
Effective Width
400mm
Thickness
0.4-0.6 mm
Hydraulic Group Power
4kw
Trademark
Xiamen Liming
Transport Package
40gp*1
Specification
12T
Origin
Fujian, China(Mainland)

New type Ridge Cap Roll Forming Machine 

 
New Type Ridge Cap Roll Forming Machine

New Type Ridge Cap Roll Forming Machine



 
General Parameter
1ItemParameters
2Model NO.Rige Cap Profile
3MaterialGalvanized sheet&Aluminum plate
4Thickness0.4--0.8MM
5Yield Strength250Mpa
6Feed Width500MM
7Effective width400MM
8Roll Stages14Stages
9Shafts Diameter75MM
10Main Motor Power5.5KW
11Hydraulic Group Power4KW
12Max. Line Speed Of Roll Former15m/min
13Electric Standard415V/50HZ/3Ph


Machine Components
 
A. 3Ton*600mm Hydraulic un-coiler

Hydraulic system tensioning steel coil inner hole, 4 claw
Brace type tensioning
Pump motor power: 1.5kw
Frequency conversion speed control, motor power: 2.2kw
Bearing Max.3 tons, inner diameter of steel coil 451-530 mm,
Outer diameter of coil: Max. 1500mm
Coil width Max. 600 mm
Self-stop device controls coil rotation/start-stop
With automatic pressure keeping function

B.  Bending roller and manual puller (no power)

Entry roller & Manual Pre-shearing device              Un-powered       
Smart cut control, to cut off the end of the final piece of sheet only
Working thickness up to 0.8mm
Polythene Film-on Device
Un-powered film-on device to cover plastic film on the surface of sheet


C.Cold Rolling Mills

Feeding section with guide;
Gear/Sprocket driving; 16-step to form
New-stand-frame-design
Rollers manufactured from 45#steel, CNC lathes, hard Chrome Coated
Shafts Diameter=ф75mm, Precision Machined
Main motor =7.5 KW, Frequency speed control
Forming speed:Approx. 5 m/min (on the base of stair distance 350mm and product length 6 meters)
Protection Mesh Cover (full mesh type) Above Roll-former To Avoid Hands Go Inside, slip type


D.  Hydraulic Stair-Drawing & Cutting M/C

Stop to press, Stop to cut; Post cut, blanking cut
Cutting tool material: Cr12, Heat treatment
Stair depth=15mm
4- pillars structure instead of old frame design


E.PLC Control System

Control the quantity & cutting length automatically;
Combined with: PLC, Touch Screen (Siemens), Inverter (Schneider), Encoder (Omron), etc
Cut-to-length tolerance≤±2 mm
Control Voltage 24V

New Type Ridge Cap Roll Forming Machine

 
 

New Type Ridge Cap Roll Forming Machine

New Type Ridge Cap Roll Forming Machine
 
After-Sale Service
In correct operation & maintaining, the machine is guaranteed for one year since leaving our factory excludes the electric elements.
Installation:
If installation is needed, WE will dispatch a technician to the buyer's factory abroad to assist regulating the machine with charge free. The buyer should assist US to get the Chinese technician's visa and should pay for the roundtrip air ticket and the local accommodation.
If installation is needed, the buyer shall make the following preparation before arrival of technicians.
 
Terms Of Trade
1.Package & Shipment: Facility water-proof packing, Control cabinet packed in wooden packing.
2.Payment: 30%payment by T/T is required as deposit within a week since the contract signing date.70% payment by T/T is required before the machine be send out of factory.

You Might Also Like