MBBR Bio Media for fish farming water treatment

Small Boss MBBR filter media is a novel biologically active carrier, it adopts scientific formula, depending on the nature of water, blending a variety of beneficial microorganisms grow quickly attached trace elements in polymer materials, through a special process modification, constructed, with more than large surface area, hydrophilic, high biological activity, biofilm fast, good effect, good impact resistance.Rich export experience allows us to export MBBR to more than 160 countries around the world.

 

Excellent Resistance to Shock Load Performance.

Efficient processing capacity, its ability to remove organic matter 2-5 times higher than that of other traditional methods, high concentrations of biomass and diversity of biological fungus, strong resistance to impact load capacity.

 

SmallBoss® MBBR Shape

It depends on the good structure and shape to grow more biological membrane. Excellent shape can provide better protected surface area and protect the biological membrane grow.

The Applization of Smallboss® MBBR

How The SmallBoss® MBBR Works

The MBBR process utilizes floating plastic carriers (media) within the aeration tank to increase the amount of microorganisms available to treat the wastewater. The microorganisms consume organic material. The media provides increased surface area for the biological microorganisms to attach to and grow in the aeration tanks. The increased surface area reduces the footprint of the tanks required to treat the wastewater. The media is continuously agitated by bubbles from the aeration system that adds oxygen at the bottom of the first compartment of the aeration tank. The microorganisms consume organic material. When compared to conventional secondary treatment it provides superior efficiency and value.

Frequently Asked Questions.
 

1.Why did others hang the film faster after adding sucrose, is the pure HDPE material already eliminated?

Answer: No, it is not. With the addition of sucrose and other additives, it is true that the film will be fast, but after a long time, the loss of sucrose will cause the early attached microorganisms to fall off. It will also cause the quality of MBBR carriers to decline, the structure to be unstable, more easily broken, and increased costs. MBBR made of pure HDPE material will last for more than 15 years.
 

2.Why is the aerobic pool very cloudy? I obviously increased the aeration volume!

Does n't it mean that the more aeration of the aerobic tank, the better?

Answer: Because the aeration volume of the aerobic tank looks simple, it should actually be just right. If the amount of aeration is insufficient, the nitrification effect will be poor, and the fluidization effect will be poor, and the nitrifying bacteria cannot be fully cultured. However, too much aeration will cause the sludge to swell and fall, resulting in muddy water. Therefore, the specific analysis of specific problems requires the control of aeration for specific problems.
 

3.After adding MBBR bio-filler, do I still need to add bio-mud?

Answer: Depending on the situation, if in the anoxic and anaerobic stages, biological mud is unavoidable and must be added. However, in the aerobic tank, if the temperature is moderate, the nitrification effect is good, and it can be omitted. If the number of bacteria is insufficient, an appropriate amount of bio-mud can be added to promote the film-hanging rate.
 

4.How much MBBR filler should be added? half? Or top up?

Answer: Using an aerobic tank as an example, if there is biological sludge, the amount of MBBR biological filler is 30%. If there is no biological sludge and the nitrification reaction is performed with pure MBBR material, the added amount can reach 70% or even 80%. Of course, sufficient aeration and agitation are required.
 

Tongxiang Small Boss Special Plastic Products Co.,Ltd,has become the largest manufacturer of MBBR Filter Media in China.It covers an area of 42,000m² and has More than 100 production lines which can produce 230m³ per day.