Roof Tile Manufacturing Machine


Other Name: Metal sheet forming machine, Steel roof tile and wall panel roll forming machine, cold roll forming machine, steel tile roll forming machine.

Components of whole set roof tile manufacturing machine:
1. De-coiler
2. Shearing Device
3. Forming System
4. Cutting Device
5. Run-out table
6. Electrical System and Control center





Technical Parameters
1. De-coiler
Manual Un-coiler
Width of raw material: 1250mm
Max Capacity: 8000kgs
Max out diameter of coil: 1600mm
Inner diameter of coil: 500-600mm
Manual feed with brake

2. Shearing Device
Shearing way: Manual
The material of blade: Cr12 with Heat treatment HRC60-62

3. Main Forming System
Feeding width: 915mm and 1200mm
Product width: 760mm and 988mm
Height of waves: 18mm
Thickness of sheet: 0.2 mm-1.0mm
Material: GI sheet coil, Colored sheet coil
Roller stations: 16rows
Material of Roller: C45 steel
Surface of Roller: Chrome plating
Diameter of main shaft: 80mm C45steel, modulation
Main Bearings: 60211
Power of main motor: 5.5kw
Forming Speed: 0-15m/min

4. Cutting device
Oil pump station 1set
Motor power of Oil pump station: 4kw
Forced air cooling device available
Cutting mould: 1set
Material of blade: CR12 with heat treatment HRC60-62
Pressure of cutting: 15tons

5. Run-out Table
Frame: Angle bar or steel tube welded
Length: 3m
Quantity: 1 pc

6. Electrical System
PLC and HMI touch Screen (Taiwan Delta or Siemens)
Automatic length measurement
Automatic quantity measurement
Length measurement: Rotary Encoder
Over current protection for control system, aviation plugs
Cutting off type: Paused to cut, moving automatically after cutting.
Power: 380V 60Hz

Our company:




Contact me:

Lisa Yang (Sales Manager)
BOTOU HUIKEYUAN ENGINEERING CONTROL CO.,LTD
 
Add: Fuzhuang Development Zone Botou City, Hebei, China

we warmly weclome you to visit our factory!