Products

Hot Air Circulating Mango Dehydrator Machine, Dried Fruit Processing Machine
Hot Air Circulating Mango Dehydrator Machine, Dried Fruit Processing Machine

Hot Air Circulating Mango Dehydrator Machine, Dried Fruit Processing Machine

China Hot Air Circulating Mango Dehydrator Machine, Dried Fruit Processing Machine, Find details about China Drying Oven, Dryer Equipment from Hot Air Circulating Mango Dehydrator Machine, Dried Fruit Processing Machine

Model NO.
JK03/06/12RD
Warranty
12 Months
Temperature Range
10-75 Degree
Dehumidification Amount
12-100L/H
Electric Heater
3kw/6kw/9kw/12kw
Weight
285kg
Rated Current
17A
Heating Capacity
21kw
Cooling Capacity
18kw
Trademark
KINKAI
Transport Package
Dryer Unit Pack in Plywood
Specification
300/600/1000/1300/1500/3500kg/batch
Origin
Guangdong, China (Mainland)
HS Code
8419310000
Model NO.
JK03/06/12RD
Warranty
12 Months
Temperature Range
10-75 Degree
Dehumidification Amount
12-100L/H
Electric Heater
3kw/6kw/9kw/12kw
Weight
285kg
Rated Current
17A
Heating Capacity
21kw
Cooling Capacity
18kw
Trademark
KINKAI
Transport Package
Dryer Unit Pack in Plywood
Specification
300/600/1000/1300/1500/3500kg/batch
Origin
Guangdong, China (Mainland)
HS Code
8419310000
Hot air circulating mango dehydrator machine, dried fruit processing machine

Hot Air Circulating Mango Dehydrator Machine, Dried Fruit Processing Machine

Introduce of KINKAI Heat Pump Dryer
A device that transfers heat from a colser area(ambient temperature) to a hotter area(drying chamber) by using mechanical energy, as in a refrigerator.

How KINKAI Works?
KINKAI heat pump dryer operatures according to a basic air conditioning cycle involving four main componrnts: the evaporator, the compressor, the condenser and the expansion valve. the working fluid(refrigerant) at low pressure is vaporized in the evaporator by heat draw from the dryer exhaust air. The compressor raises the enthalpy of the working fluid of the heat pump and discharges it as superheated vapor at high-pressure. Heat is removed from the working fluid and returned to the process air at the condensor. The working fluid is then throttled to the low-pressure line(using an expansion valve) and enters the evaporator to complete the cycle. In the dryer system, hot and dry air at the exit of condenser is allowed to pass through the drying chamber where it gains latent heat from the material. The humid air at the dryer exit then passes through the evaporator where condensation of moisture occurs as the air goes below dew point temperature. Then drain the condenser water.
Hot Air Circulating Mango Dehydrator Machine, Dried Fruit Processing Machine

KINKAI Heat Pump Dryer Application
Drying herb:
pseudo-ginseng, aniseed,RADIX MORINDAE OFFICINALIS, dendrobe, Chinese yam, glossy ganoderma, sea cucumber, honeysuckle, flower, fructus momordicae(Luo Han Guo), cassia, ginseng, ginger, maca, Chinese wolfberry, Chinese angelica root etc.
Drying agriculture products:
Dragon fruit flower, rose, chrysanthemum flower, mushroom, edible fungus, sweet potatoes, okar, white fungus, edible tree fungus, red pepper, Daylily, Agrocybe aegerita, henryst eudnera tuber, dried vegetables, baboo shoot, cassava, starch, tomato etc.
Drying fruit:
Longan, Litchi, banana, mango,date, waxberry, plum, lemon, raisin, artocarpus heterophyllus lam, kiwi fruit, dried persimmon, olive, candied fruit ect.
Drying food:
sausage, preserved pork, smoked fish, intestine and casing, rice noodles, noodles, beancurd sticks.
Drying seafood:
sea fish, squid, shrimp, seaear, trepan, cuttlefish, hippocampi etc.
Drying tea:
puer, red tea etc.
Drying incense:
inscense, mosquito incense etc.
Drying wood:
redwood, redwood furniture, bamboo products etc.

Function (Touch Screen)
Drying
Cooling
Dehumidify

Our Workflow Chart
Hot Air Circulating Mango Dehydrator Machine, Dried Fruit Processing Machine

KINKAI Heat Pump Dryer Features
1. Economical
KINKAI Heat Pump technology offers running costs that are typically up to 75% lower than with a conventional drying machine.
2. Environmentally Friendly
By electric, no pollution
The combinationof lower energy input, reduced operational consumption "wastage", KINKAI manufacturing quality, and extended design life ensure the impact of a Heat Pump dryer upon the environment and natural resources is lower than any comparable traditional drying solution.
3. Multifunction
Heating drying, Cooling drying and Dehumidify

Buying Guide
ModelDryer QtyProduct capacityChamber SizePower Consumption
JK03RDSingle300kg/ batch4000x2000x2200mm4.8kw
Double1300kg/ batch7000x2000x2200mm9.6kw
JK06RDSingle 600kg/ batch6000x2800x2200mm8.5kw
Double 1500kg/ bacth10000x2800x2200mm17kw
JK12RDSingle1000kg/ batch6000x3000x2200mm15kw
Double3500kg/ batch10000x3000x2200mm30kw

Technical Parameters
Single Type
MODELUNITJK03RDJK06RDJK12RD
POWER SUPPLYV/PH/HZ380V/3PH,50/60HZ380V/3PH,50/60HZ380V/3PH,50/60HZ
220V/1PH,50/60HZ
RATED CURRENTA9.6A(380V),22A(220V)17.030.0
HEATING CAPACITYKW10.521.042.0
COOLING CAPACITYKW7.818.032.0
DEHUMIDIFYL/H12.025.050.0
TEMPERATUREC10-7510-7510-75
NOISEdB(A)757575
ELECTRIC HEATERKW3.06.012.0
DRYER DIMENSIONMM1675X860X12801760X1060X12802120X1360X1590
WEIGHTKG180285480

Double Type
MODELUNITJK03RDJK06RDJK12RD
POWER SUPPLYV/PH/HZ380V/3PH,50/60HZ380V/3PH,50/60HZ380V/3PH,50/60HZ
220V/1PH,50/60HZ
RATED CURRENTA19.2A(380V),44A(220V)34.060.0
HEATING CAPACITYKW21.042.084.0
COOLING CAPACITYKW15.636.064.0
DEHUMIDIFYL/H24.050.0100.0
TEMPERATUREC10-7510-7510-75
NOISEdB(A)757575
ELECTRIC HEATERKW3.0x26.0x212.0x2
DRYER DIMENSIONMM1675X860X12801760X1060X12802120X1360X1590
WEIGHTKG180x2285x2480x2
Hot Air Circulating Mango Dehydrator Machine, Dried Fruit Processing Machine
Application Cases
Hot Air Circulating Mango Dehydrator Machine, Dried Fruit Processing Machine

How to Dryer Mango with KINKAI Dryer?
1. Select fresh ripe mangoes: Li Song mango, Zi Hua mango and wild mangoes grown in Hainan are suitable for processing. Full pulp contributes to the rate of finished products. It would better that mangoes are nearly ripe. If the maturity is low, mangoes taste bad with poor color. They are perishable in case of post-maturity.
2. Washing: Put mangoes in the tank, rinse them with clear water flow, select unqualified ones, put qualified ones in the plastic baskets by size, and strain water
3. Peeling: Use a stainless steel knife to remove exocarp and scars by hand. Make sure the surface is smooth and even and all exocarp is removed. If not, tannin in the exocarp is easy to get brown in the process, which has a negative impact on color of finished products. Use a sharp blade to cut peeled mangoes into slices on a vertical basis. Each slice is 8-10 mm thick. The kernel still with some pulp can be made into juice.
4. Color protection: Use sulfur to smoke or soak slices to protect their color.
5. Drying: Put the mango slices on the rack (if soaked with sulfur, strain water first), and put the rack in the cabinet to dry the mango slices up.
6. At the beginning, the temperature shall be held at 70-75°C. In the later phase, the temperature shall be at 60-65°C. Pay attention to turning over and rewetting in the drying process.
7. Softening and packaging: If moisture content of mango slices meets the desired level, typically 15-18%, put them in the closed container for 2-3 days to soften them and make water balanced for packaging.

Delivery and Package
1. For heat pump dryer part --- with plywood
2. For drying chamber and trolleys&trays
   If shipped with 20ft container or 40ft container, no packing
   If shipped with LCL(less than container load), packed in plywood
Hot Air Circulating Mango Dehydrator Machine, Dried Fruit Processing Machine

Our Service
A. Payment service
1. T/T
2. L/C (for container order only)
3. Western Union (for sample order&parts)

B. Technical Service
1. We calculate the capacity and recommend the best models.
2. We supply you the professional refrigeration technical support and electronic technical support for your installation, debugging and operation.
3. We supply the spare parts and technical support in & after the warranty time.
4. We supply the training course to your workers at our factory if you need.

C. After-sales service
1. Technical support for your installation, operation and maintenance. 
2. One year's warranty, and you can pay for extended warranty.
3. Spare parts and technical support at most economic prices after the warranty.

 
More details you require, please feel free to contact Wing.
Tel: 008613570470153

You Might Also Like