Specifications
1.Material:SS316L/SS304
2.Steam pressure (Mpa):0.5-0.8
3.Evaporation temperature:45-90
4.Evaporation capaicty: 500~50000L/h

Application:
It's applicable for dairy products, pharmacy, glucose, starch,chemical industry,  xylose, citric acid, ammonium sulfate, biological engineering, environmental engineering and waste liquid recovery and treatement. etc.

Equipment structure:
It consists of (first-effect, second-effect, third-effect)separators and evaporators and preheaters,condenser and vaccum pump, feeding pump,circulation pump, discharge pump, condensed water pump and system pipe fittings, etc. Equiped wit CIP spraying cleaning ball, vacuum gauge, thermometer,pressure gauge,and so on.

Equipment characteristics:
1. Material: SUS304 or SUS316L;
2.Full closed process, fast and low temperature evaporation;
3.Inside pipes are mirror polishing seamless sanitary pipes, so material is not easy to paste on the pipe all, it's easy for cleaning;
4.Low steam consumption: 1kg steam can evaporte 3.5kg water;
5.Low evaporation temperature:part of secondary steam can be inhaled into single-effect heater through spray type hot pressure pump, this would make full use of the heat and the evaporation temperature is low.
6.Large concentration ratio: adopt falling film evaporation, which make the material liquid with larger viscosity be easy to flow and evaporate, hard to scale,  short cocentration time, the concentration ratio can reach to 1:5.
7.This equipment  can realize automatic production, intellectual system management, which is in conformity with GMP standard.
8.Can be desinged into different technological process according to the different characteristics of the materials , also can according to different users' requirements equip with automaticl control system.

What does a falling film evaporator do?

A falling film evaporator (FFE) is a specific type of vertically oriented shell and tube (S) heat exchanger that is used to separate two or more substances with different boiling point temperatures.

How do you make a falling film evaporator?

To investigate the falling film heat transfer coefficient, evaporator is designed with horizontal tubes arranged in staggered manner. There are four rows of tubes and each row has 12 tubes installed in four pass arrangements. The tubes are fabricated with special outside and inside profile to enhance heat transfer.

What is the different between falling film evaporator and rising film evaporator?

Falling film evaporators are more commonly used than rising film types. They are less sensitive to solids loading than rising film units, but more sensitive to liquid distribution across the tubes. In a falling film evaporator, poor liquid distribution can cause inefficient heat transfer and tube plugging problems.

1.How long can I receive your reply after I send my inquiry?
  We will reply you within 12 hours on workday.
2.Are you a manufacturer or a commercial company?
   We are a manufacturer, and we have a foreign trade department, we market our own products.
3.What products can you provide?
   We mainly produce evaporators, tank systems,valve.....
4.What are the application fields of your products?
   Our products are mainly used on food, beverage,diary, chemical & pharmaceutical industry.
5.Can you provide custom products?
  Yes, custom products are our main products. We can develop and manufacture products according to customer's drawing, sample or description.
6.How many employees do you have?
  We have over 100 employees, including several technicians and engineers.
8.How do you ensure your product quality?
  We conduct inspections in every production procedure, and for finished products, we will take 100% inspection depend on international standards according to customer's requirements.
9.Payment?
We will confirm the payment with you when quoting, like FOB, CIF, CNF or others.We accept 30% deposit, balance before shipment. T/T is the main payment, and L/C is acceptable as well.