Automatic Metal Sheet Strip Straightener Machine


S loop High speed straightener is a powerful new equipment for high speed stamping, which can improve the quality and quantity of punch products.It is impossible to produce a good punch by leveling the end of the coil material. Only by leveling the coil material can the stress be eliminated. After leveling by the machine, the material can be corrected to bend downward or flat.The transmission device and frequency converter (cycle control) can synchronize with the punch speed and balance the feeding.
The speed of S loop High speed straightener can reach 60m/min, and usually configured with the double head decoiler machine, high speed gear machine and H frame high speed press machine, it's usually suitable for motor rotor and stator lamination stamping.
.

It has 11 pieces of straightening rollers,5 on the top and 6 at the bottom,the surface of the rollers have been treated thickened hard chrom and precise polishing,whose hardness can reach to HRC60°±2.
The straightening wheel have dial indicator,it could found the leveling points quickly. It strengthen roll stiffness according with straightening back pressure wheel,then make the straightening effect better.


Function:
1. The rectifying roller is made of solid bearing steel, which is grinded and plated with hard chromium after high frequency heat treatment.
2. The machine can be used independently, and it can be used together with MT and DBMT automatic feeder, with better effect;
3. The machine adopts large cylinder pressure material, and adopts synchronous worm wheel and worm for correction and adjustment.The handle is rotated once, and the upper wheel can be adjusted with only a drop of 1mm.
4. High rigidity mechanical structure, high horsepower output.High speed and stable feeding can be made to improve the production efficiency and prolong the service life of the equipment.

Specification
 

Picture
 

 

Customer's Application

S loop straightener machine is testing in our factory.

FAQ
 

1. What's payment terms?

SUNRUI MACHINE receives T/T payment and LC at sight when the amount over USD15000.00.
 

2. What's your coil equipment leading time?

For standard decoiler, straightener or feeders, the usually lead time is about 10-25 workdays, but we usually have machines in stock. Please contact with our sales if you need the coil handling equipment urgently.

For compact coil feed lines or whole metal stamping lines, it needs 30-70 workdays depends on different specifications and production plan in our factory.

3. What's warranty time of your machine?

Usually the warranty time is 12 months. Also the warranty time can be extend acorrding the specific requirements.

4. What after-sales service does SUNRUI provide?

For the standard decoiler straightener feeder machine, it's easy to install and debug it, most of our customers can do it by themselves; And what's more, our technical engineer can teach your operators how to install  and operate it. SUNRUI machine on-site training will avoid operational problems that are easy to occur at the beginning of production. The training after sales service will create more value for your employees.

For the compact coil feed machine and complete metal stamping line, SUNRUI can arrange engineers to go overseas for the coil handling equipment installation. They guide the customer's operators on-site. Then the commissioning phase will smoothly enter into the mass production phase.

5. What's the package of your coil feeding machine?

For standard small decoiler, straightener, feeder which go LCL shipping, SUNRUI machine will use plastic films cover the equiment, and then fix it into a woodencase.

For the coil feed lines and complete line which go FCL shipping, SUNRUI machine will fix each part with ropes on the shipping container and then wrapped them with plastic films.

Here with some pictures for your reference.