485GSM Fiberglass Complex Mat for Pultrusion of Polyester Surface Mat and Continuous Filament Mat
China 485GSM Fiberglass Complex Mat for Pultrusion of Polyester Surface Mat and Continuous Filament Mat, Find details about China Fiberglass Mat, Pultrusion Process from 485GSM Fiberglass Complex Mat for Pultrusion of Polyester Surface Mat and Continuous Filament Mat
Basic Info.
Model NO.
EMS485
Softness
Soft or Customized
Perfermance
Compatible with Multiple Resin System
Application
FRP, Boat, Roof, Cooling Tower, Construction, etc.
Binder Type
Powder or Emulsion
Trademark
Tianming
Transport Package
Plastic Bag, Carton and Pallet
Specification
1.59oz. per sq/ft or 485grams per sq/m
Origin
Nanjing, China
HS Code
7019310000
Model NO.
EMS485
Softness
Soft or Customized
Perfermance
Compatible with Multiple Resin System
Application
FRP, Boat, Roof, Cooling Tower, Construction, etc.
Binder Type
Powder or Emulsion
Trademark
Tianming
Transport Package
Plastic Bag, Carton and Pallet
Specification
1.59oz. per sq/ft or 485grams per sq/m
Origin
Nanjing, China
HS Code
7019310000
Product Desciption
Fiberglass Composite Mat EMS485 of Nanjing Tianming:
introduction
The composite mats are combined with continuous filament/chopped strand and polyester surface veil. It is a high-tech product. And we have its independent intellectual property right and patent. The composite mat has the characteristics of high strength, fast flow of resin between layers, easy-rolling resin and good flat permeability. The continuous filament and polyester surface veil composite mat has higher strength and more clear surface. These two kind mat widely used in pultrusion products, RTM products and also high quality hand lay-up products. The stitched fiberglass and polyester surface veil composite mat, and the multiaxial fabric and polyester surface veil composite mat, solve the question caused by the stitched mat-the reinforced product's surface aging problem, and also make the surface more beautiful.
Basic Parameters:
Qualified by the Third-part Test:
• The odour characteristics - RA
• VOC - SGS
• Asbestos-free - SGS
• RoHs - SGS
• SOC - Shimadzu
etc.
Uses:
• Automotive parts(the bottom of engine, GMT, bumper, bonnet insulation pad, dashboard insulation board, frame, headliner, sunroof, coatrack, rear parcel, heat insulation hood, sun visor, rear tray assembly,etc)
• Boats/yachts
• FRP fields(hand lay-up, RTM, filament winding, pultrusion, molding,etc)
• Chemical corrosion resistant pipes
• Cooling towers
• Tanks
etc.
Or please tell me the application of your fiberglass composite mat, Then the one most suitable for you will be recommended.
Packaging:
• Tied with plastic rope
• Covered with a plastic bag
• Packed in a carton and sticked with label
• Packed by pallet with shrink wrap and shipping mark
Loading Quantity:
One plastic bag and carton for a roll with N.W.30kg. 12 or 16 rolls on a pallet. 20 pallets (10 pallets with 12 rolls, 10 pallets with 16 rolls) in one 20' container, that is N.W. 8.4t in one 20' container.
Storage:
Unless otherwise specified, fiberglass products should be stored in a dry, cool and moistureproof area. Room temperature and humidity should always be maintained at 15°C - 35°C, 35% - 65% respectively. Best used within 12 months after production date. Fiberglass products should remain in their original packaging until just prior to use.
Fiberglass Composite Mat Series:
Our Services
1. 24 hours online reply(English, Spanish and Chinese) .
2. Other thickness & size also available on request.
4. Your business relationship with us will be confidential to any third party.
5. Good after-sale service offered, please get back if you got question.
Any question, please contact me:
introduction
The composite mats are combined with continuous filament/chopped strand and polyester surface veil. It is a high-tech product. And we have its independent intellectual property right and patent. The composite mat has the characteristics of high strength, fast flow of resin between layers, easy-rolling resin and good flat permeability. The continuous filament and polyester surface veil composite mat has higher strength and more clear surface. These two kind mat widely used in pultrusion products, RTM products and also high quality hand lay-up products. The stitched fiberglass and polyester surface veil composite mat, and the multiaxial fabric and polyester surface veil composite mat, solve the question caused by the stitched mat-the reinforced product's surface aging problem, and also make the surface more beautiful.
Basic Parameters:
| Model No.: | EMS485 |
| Weight: | 1.59oz. per sq/ft or 485grams per sq/m |
| Width: | up to 85" or up to 2160mm |
| Size of the Inner Carton Tube: | Length 41* Diameter 3" * Thickness 0.2" or Length 1040* Diameter 77 * Thickness 5mm |
Qualified by the Third-part Test:
• The odour characteristics - RA
• VOC - SGS
• Asbestos-free - SGS
• RoHs - SGS
• SOC - Shimadzu
etc.
Uses:
• Automotive parts(the bottom of engine, GMT, bumper, bonnet insulation pad, dashboard insulation board, frame, headliner, sunroof, coatrack, rear parcel, heat insulation hood, sun visor, rear tray assembly,etc)
• Boats/yachts
• FRP fields(hand lay-up, RTM, filament winding, pultrusion, molding,etc)
• Chemical corrosion resistant pipes
• Cooling towers
• Tanks
etc.
Or please tell me the application of your fiberglass composite mat, Then the one most suitable for you will be recommended.
Packaging:
• Tied with plastic rope
• Covered with a plastic bag
• Packed in a carton and sticked with label
• Packed by pallet with shrink wrap and shipping mark
Loading Quantity:
One plastic bag and carton for a roll with N.W.30kg. 12 or 16 rolls on a pallet. 20 pallets (10 pallets with 12 rolls, 10 pallets with 16 rolls) in one 20' container, that is N.W. 8.4t in one 20' container.
Storage:
Unless otherwise specified, fiberglass products should be stored in a dry, cool and moistureproof area. Room temperature and humidity should always be maintained at 15°C - 35°C, 35% - 65% respectively. Best used within 12 months after production date. Fiberglass products should remain in their original packaging until just prior to use.
Fiberglass Composite Mat Series:
| Model No. | Weight | Width | Loss on Ignition | Moistrure | Net Weight per Roll | Use And Craftwork | |||
| (oz. per sq/ft) | (grams per sq/m) | (inch) | (mm) | (%) | (%) | (lb) | (kg) | ||
| EMSC-P | 0.98/1.47/2 | 300/450/600 | 47-94.5 | 1200-2400 | 2-8 | ≤0.2 | 66 | 30 | Pultrusion / Winding |
| EMSC-R | 0.98/1.47/2 | 300/450/600 | 47-94.5 | 1200-2400 | 2-6 | ≤0.2 | 66 | 30 | Injection |
| EMSC-M | 0.98/1.47/2 | 300/450/600 | 47-94.5 | 1200-2400 | 2-8 | ≤0.2 | 66 | 30 | Molding & Hand Lay-up |
| EMSP | 0.79 | 240 | 41-94.49 | 1040-2400 | 2-8 | ≤0.2 | 77 | 35 | Pultrusion / Compression Molding |
| EMSP | 1.10 | 335 | 41-94.49 | 1040-2400 | 2-8 | ≤0.2 | 77 | 35 | Pultrusion / Compression Molding |
| EMSP | 1.60 | 485 | 41-94.49 | 1040-2400 | 2-8 | ≤0.2 | 77 | 35 | Pultrusion / Compression Molding |
1. 24 hours online reply(English, Spanish and Chinese) .
2. Other thickness & size also available on request.
4. Your business relationship with us will be confidential to any third party.
5. Good after-sale service offered, please get back if you got question.
Any question, please contact me:
You Might Also Like
Zinc It Done Water-Based Galvanizing Spray Paint Aqueous Gal......
EPA/Carb Certificated Fuel Line Fuel Hose for Garden Machine......
100g high performance desiccant in Tyvek
Truck Spare Parts Weichai Engine Intake Rocker Arm Best
Art Glass Smoking Water Pipe ( AY 020)
Pdadmac 40% Cationic Polymer for Sludge Dewatering
Hot-Sale HDI Multilayer Printed Circuit Board Fr4 PCB Power ......
High-End Wall Mounted Storage Holder Rack for Kitchen Goldmi......
Rth -1100A Non Woven Sheet Cutting Machine Sheet Label Cutti......
Non Crosslinked Hyaluronic Acid Meso Filler for Lip Injectio......