Megtro 220kv Overhead Transmission Line Steel Tower (MG-220VHT)
China Megtro 220kv Overhead Transmission Line Steel Tower (MG-220VHT), Find details about China 220kv Overhead Transmission Line Steel T, Overhead Transmission Seel Tower from Megtro 220kv Overhead Transmission Line Steel Tower (MG-220VHT)
Basic Info.
Model NO.
MG-220VHT
Structure
According to Client Requirements
We Design by Pls& Tower Software
According to Client Requirements
Trademark
MEGATRO
Transport Package
Export Standard Package
Specification
AS PER CLIENTS
Origin
Shandong, China
HS Code
73082000
Model NO.
MG-220VHT
Structure
According to Client Requirements
We Design by Pls& Tower Software
According to Client Requirements
Trademark
MEGATRO
Transport Package
Export Standard Package
Specification
AS PER CLIENTS
Origin
Shandong, China
HS Code
73082000
Product Desciption
Megatro 220KV overhead transmission line steel tower
An overhead power line is a structure used in electric power transmission and distribution to transmit electrical energy along large distances. It consists of one or more conductor (most often three or four) suspended by towers or utility poles. Since most of the insulations is provided by air, overhead power lines are generally the lowest-cost method of power transmission for large quantities of electric energy.
Towers for support of the lines are made of wood (as-grown or laminated), steel (either lattice structures or tubular poles), concrete, aluminum, and occasionally reinforced plastics. MEGATRO mainly produce, design and install galvanized steel tower, and provide service on site for 220KV overhead transmission line.
220KV power transmission line belongs to high voltage grade, used for sub-transmission and transmission of bulk quantities of electric power and connection to very large consumers. Our 220KV overhead transmission line steel tower including many types, such as lattice angular tower, tubular tower, monopole, or guyed towers and mast.
MEGATRO is one of the few manufactures who assemble a face of 220KV overhead transmission line steel tower. This attention to quality may not be the cheapest process but it does insure every tower meets our high standards of quality. And it helps to reduce on-site construction cost due to mismatched assemblies.
After fabrication all 220KV overhead transmission line steel tower are delivered to the galvanizing facility to be Hot DIP Galvanized. Towers are processed through the facility by Caustic Cleaning, Pickling, and then Fluxing. These strict procedures insure years of maintenance free towers.
MEGATRO's 220KV overhead transmission line steel tower systems can accommodate a variety of cross-arm. MEGATRO also offers a wide variety of accessories and mounts.
Availability size: Based on the customer's requirements.
Material: Chinese material or as per clients requirement
Package: Both parties discuss before delivery
Terms of Payment: L/C, T/T
Minimum Order Quantity: 1 set
Port of Loading: Qingdao Port
Lead Time: One month or based on the customer's needs
APPLICABLE STANDARD AND CODES
All towers manufactured and design shall be generally in accordance with latest revision of the following standards except where specifically directed otherwise.
General
IEC 60826 - Design criteria of overhead lines
IEC 60652 - Loading tests on overhead line structures
ISO 1459 - Metallic coatings - Protection against corrosion by Hot Dip Galvanizing
ISO 1461 - Hot dip galvanized coatings on fabricated iron and steel articles
ISO 12944 - Paint coatings, corrosion protection, and structural steelwork
ISO 898-1 - Mechanical properties of fasteners. Part 1-Bolts, Screws and studs
ISO 630 - Structural Steels - plates, wide flats, bars, sections and profiles
ISO 657 - Hot rolled structural steel plates tolerances on dimensions and shape
ISO 7411 - Hexagon Bolts for high strength structural bolting with large width across flats
ISO 657-5 - Hot rolled Structural Steel Sections equal and unequal leg angles
ISO 7452 - Hot rolled structural steel plates tolerances on dimensions and shape
BS EN 50341-1 -Overhead electrical lines exceeding AC 45kV -General Requirements
BS 8004 - Code of Practice for Foundations
BS 8110 - Structural use of concrete
ANSI10-97 - Design of latticed steel transmission structures
IEC 60050 (151) International Electro-technical Vocabulary
Part 51 Electrical and Magnetic Devices
IEC 60050 (601) Chapter 601: Generation, transmission and distribution of electricity-General
IEC 60050 (601) Chapter 601: Generation, transmission and distribution of electricity-Operation
IEC 60059 IEC standard current ratings
Chinese Standard
American Standards:
DIN VDE 0101 - Isokeraunic Level
VDE 0201 - Climatic and environmental conditions
CVDE 0210 - Minimum safety factors under simultaneous working loads
ISO R898 Mechanical Properties of Fasteners
BS EN ISO 1461:1991 - High dip galvanized coatings on fabricated iron and steel articles. Specifications and standards
A) BS 5950: Welding Terms And Symbols
B) BS 729: Hot - Dip Galvanised Coating On Iron And Steel Articles
C) BS 2901: Filler Rods And Wires For Gas Shielded Arc Welding: Part 1 Ferritic Steels
D) BS 3692: ISO Metric Precision Hexagon Bolts, Screws And Nuts
E) BS 4360: Weldable Structural Steel
F ) BS 5135: Metal - Arc Welding Of Carbon And Carbon Manganese Steel
G) BS 5950: Part 1: Code Of Practice For Loading Latticed Tower & Masts
Part 2: Guide To The Background And Use Of Part 1"Code OF Practice For Loading"
Part 3: Strength Assessment of Members
H) DD 133 (1986): Code Of Practice For Loading Latticed Tower & Masts
I) BS 4592 (1987): Part 2: Specification For Expanded Metal Grating Panels
J) BS 4592 (1977): Code Of Practice For Protective Coating Of Iron And Steel Structure Against Corrosion
K) BS 4190: Bracing & Flanged Bolts
L) BS 4190: Rolled Steel sections, Flats & Plates
Moreover, we also can design tower foundation according to below standard:
BS 8004 - Code of Practice for Foundations
BS 8110 - Structural use of concrete
BS 4449 - Carbon steel bars for the reinforcement of concrete
If any special requirement, we can design and discuss with client.
An overhead power line is a structure used in electric power transmission and distribution to transmit electrical energy along large distances. It consists of one or more conductor (most often three or four) suspended by towers or utility poles. Since most of the insulations is provided by air, overhead power lines are generally the lowest-cost method of power transmission for large quantities of electric energy.
Towers for support of the lines are made of wood (as-grown or laminated), steel (either lattice structures or tubular poles), concrete, aluminum, and occasionally reinforced plastics. MEGATRO mainly produce, design and install galvanized steel tower, and provide service on site for 220KV overhead transmission line.
220KV power transmission line belongs to high voltage grade, used for sub-transmission and transmission of bulk quantities of electric power and connection to very large consumers. Our 220KV overhead transmission line steel tower including many types, such as lattice angular tower, tubular tower, monopole, or guyed towers and mast.
MEGATRO is one of the few manufactures who assemble a face of 220KV overhead transmission line steel tower. This attention to quality may not be the cheapest process but it does insure every tower meets our high standards of quality. And it helps to reduce on-site construction cost due to mismatched assemblies.
After fabrication all 220KV overhead transmission line steel tower are delivered to the galvanizing facility to be Hot DIP Galvanized. Towers are processed through the facility by Caustic Cleaning, Pickling, and then Fluxing. These strict procedures insure years of maintenance free towers.
MEGATRO's 220KV overhead transmission line steel tower systems can accommodate a variety of cross-arm. MEGATRO also offers a wide variety of accessories and mounts.
Availability size: Based on the customer's requirements.
Material: Chinese material or as per clients requirement
Package: Both parties discuss before delivery
Terms of Payment: L/C, T/T
Minimum Order Quantity: 1 set
Port of Loading: Qingdao Port
Lead Time: One month or based on the customer's needs
APPLICABLE STANDARD AND CODES
All towers manufactured and design shall be generally in accordance with latest revision of the following standards except where specifically directed otherwise.
General
IEC 60826 - Design criteria of overhead lines
IEC 60652 - Loading tests on overhead line structures
ISO 1459 - Metallic coatings - Protection against corrosion by Hot Dip Galvanizing
ISO 1461 - Hot dip galvanized coatings on fabricated iron and steel articles
ISO 12944 - Paint coatings, corrosion protection, and structural steelwork
ISO 898-1 - Mechanical properties of fasteners. Part 1-Bolts, Screws and studs
ISO 630 - Structural Steels - plates, wide flats, bars, sections and profiles
ISO 657 - Hot rolled structural steel plates tolerances on dimensions and shape
ISO 7411 - Hexagon Bolts for high strength structural bolting with large width across flats
ISO 657-5 - Hot rolled Structural Steel Sections equal and unequal leg angles
ISO 7452 - Hot rolled structural steel plates tolerances on dimensions and shape
BS EN 50341-1 -Overhead electrical lines exceeding AC 45kV -General Requirements
BS 8004 - Code of Practice for Foundations
BS 8110 - Structural use of concrete
ANSI10-97 - Design of latticed steel transmission structures
IEC 60050 (151) International Electro-technical Vocabulary
Part 51 Electrical and Magnetic Devices
IEC 60050 (601) Chapter 601: Generation, transmission and distribution of electricity-General
IEC 60050 (601) Chapter 601: Generation, transmission and distribution of electricity-Operation
IEC 60059 IEC standard current ratings
Chinese Standard
| No | Code | DESCRIPTION |
| 1 | GB/T2694-2003 | Power Transmission line Steel tower - Technical requirements for manufacturing |
| 2 | JGJ81-2002 | Technical specification for welding for steel structure of building |
| 3 | GB9787-88 | Measuring and allowable tolerance for hot-rolled equal angle |
| 4 | GB709-88 | Measuring and allowable tolerance for hot-rolled plate and strip |
| 5 | GB/T699-1999 | Quality Carbon Structural Steel |
| 6 | GB/T1591-1994 | Low alloy high strength structural Steel |
| 7 | GB700-88 | Carbon Structural Steel |
| 8 | GB222-84 | Method of sampling steel for determination of chemical composition and permissible variations |
| 9 | GB/T228-2002 | Method for Tensile testing of metals |
| 10 | GB/T232-1999 | Method for Bending test of metals |
| 11 | GB/T5117-1995 | Carbon Welding Rod |
| 12 | GB/T5118-1995 | Low Alloy Welding Rod |
| 13 | GB/T8110-1995 | Welding wires for gas shielding arc welding of carbon and low alloy steels |
| 14 | GB/T10045-2001 | Carbon steel flux cored electrodes for arc welding |
| 15 | JB/T7949-1999 | Weld outer dimensions for steel construction |
| 16 | GB50205-2001 | Test Standard for Acceptance of Steel Structure |
| 17 | GB/T470-1997 | Zinc Ingot |
| 18 | GB3098.1-2000 | Mechanical properties of fasteners-Part 1:Bolts, screws and studs |
| 19 | GB3098.2-2000 | Mechanical properties of fasteners-Part2: Nuts, and thread |
| 20 | GB3098.3-2000 | Mechanical properties of fasteners-Part3: Fastening screw |
| 21 | GB/T5780-2000 | Helical Bolts Grade C |
| 22 | GB/T41-2000 | Helical Nuts Grade C |
| 23 | GB/T90-2002 | Flat Washer Grade C |
| 24 | GB/T13912-2002 | Metal Coating, Technical Requirement and Test Method for Hot-dip galvanized Metal Parts |
American Standards:
| Standard | Description |
| ASTM A6/A6M | Standard specification for general requirements for rolled structural steel bars, plates, and sheet piling. |
| ASTM - 6 | - General Requirements for delivery of Rolled Steel Plates, Shapes, sheet Piling Bars for structural used |
| ASTM A36/A36-M-97a | Standard specification for Carbon structural steel |
| ASTM A123 / A123M-02 | Standard specification for Zinc (Hot-Dip Galvanized) Coatings on iron and steel products |
| ASTM A143 / A143M-03 | Standard Practise for Safeguarding Against Embitterment of Hot-Dip Galvanized Structural Steel Products and Procedure for Detecting Embitterment |
| ASTM A153/ A153M-05 | Standard specification for zinc coating (Hot-Dip) on iron and steel hardware |
| ASTM A - 194 | - Grade for bolt |
| ASTM A239 | Standard practice for locating the thinnest spot in a zinc (Galvanized) Coating on Iron or Steel Articles |
| ASTM A242 | Standard specification for High-Strength Low-Alloy Structural steel |
| ASTM A307 | Standard Specification for Carbon Steel Bolts and Studs, 60000 PSI Tensile strength |
| ASTM A370-06 | Standard Test Methods and Definitions for Mechanical Testing of Steel Products |
| ASTM A325 | Standard Specification for structural bolts, steel, Heat treated 120/105 ksi minimum tensile strength |
| ASTM A-325 or A-354 | - Galvanized hexagonal head of connection bolt |
| ASTM A325-97 | Standard Specification for High-strength Bolts for structural steel Joints |
| ASTM A384 / A384M-02 | Standard Practise for Safeguarding Against Warpage and Distortion During Hot-Dip Galvanizing of Steel Assemblies. |
| ASTM A394-93 | Standard Specification for steel Transmission Tower, Bolts, Zinc Coated and Bare |
| ASTMA - 563 | - Class and size of nuts |
| ASTMA - 572 | - Chemical composition of steel |
| ASTM A572/A572-97c | Standard specification for High-Strength Low-Alloy Columbium-Vanadium Structural steel |
| ASTMA - 615 | - The anchor bolt material |
| ASTM A673 / A673M-07 | Standard Specification for Sampling Procedure for Impact Testing of Structural Steel |
| ASTM B201 | Standard practice for testing Chromatic coating on Zinc and Cadmium surfaces |
| ASTM E94-93 | Standard Guide for Radiographic Testing |
| ASTM E 709-95 | Standard Guide for Magnetic Particle Examination |
| ASCE Manual 72 | - Load testing a simple structure |
| ASCE 10-97 | Standard Design of latticed steel transmission structures |
| AWS D1.1 | American Welding Society D1,1/D1,1M structural Welding code- Steel |
| ANSI B-182-2 | Bolts, nuts and washers dimensions |
DIN VDE 0101 - Isokeraunic Level
VDE 0201 - Climatic and environmental conditions
CVDE 0210 - Minimum safety factors under simultaneous working loads
ISO R898 Mechanical Properties of Fasteners
BS EN ISO 1461:1991 - High dip galvanized coatings on fabricated iron and steel articles. Specifications and standards
A) BS 5950: Welding Terms And Symbols
B) BS 729: Hot - Dip Galvanised Coating On Iron And Steel Articles
C) BS 2901: Filler Rods And Wires For Gas Shielded Arc Welding: Part 1 Ferritic Steels
D) BS 3692: ISO Metric Precision Hexagon Bolts, Screws And Nuts
E) BS 4360: Weldable Structural Steel
F ) BS 5135: Metal - Arc Welding Of Carbon And Carbon Manganese Steel
G) BS 5950: Part 1: Code Of Practice For Loading Latticed Tower & Masts
Part 2: Guide To The Background And Use Of Part 1"Code OF Practice For Loading"
Part 3: Strength Assessment of Members
H) DD 133 (1986): Code Of Practice For Loading Latticed Tower & Masts
I) BS 4592 (1987): Part 2: Specification For Expanded Metal Grating Panels
J) BS 4592 (1977): Code Of Practice For Protective Coating Of Iron And Steel Structure Against Corrosion
K) BS 4190: Bracing & Flanged Bolts
L) BS 4190: Rolled Steel sections, Flats & Plates
Moreover, we also can design tower foundation according to below standard:
BS 8004 - Code of Practice for Foundations
BS 8110 - Structural use of concrete
BS 4449 - Carbon steel bars for the reinforcement of concrete
If any special requirement, we can design and discuss with client.
You Might Also Like
20 Inch Industrial Big Blue RO Water Filter
Wholesale Quantum Board 220W LED Grow Light for Grow Tent
Gl-II 200m Water Well Drilling Rig Wells Drilling Machine
Hot Sale Product 2021 DC Current Motor Arc Welding Machine O......
Sodium Stearoyl Lactylate ( SSL /CSL)
PC200-6 Excavator Hand Throttle Controller Manual 7834 -27-2......
Sound DJ Bass Speaker SA208b (DSP) PA Speaker System Profess......
Plastic LED Furniture Big Lamp for Nightclub
Kids Silicone Bowl Cup Baby Plastic Food Feeding Bowl
49S CRYSTAL RESONATOR 4.000MHz
Blr/Ek- 053s Refrigeration Line Filter Drier