Xenon Aging Testing Chamber/Xenon Lamp Aging Climate Resistant Tester
China Xenon Aging Testing Chamber/Xenon Lamp Aging Climate Resistant Tester, Find details about China Xenon Weathering Test Machine, Xenon Weathering Tester from Xenon Aging Testing Chamber/Xenon Lamp Aging Climate Resistant Tester
Basic Info.
Model NO.
GAG-E211
Trademark
Gaoge
Specification
Studio size: 600x600x600 (LxDxH)
Origin
China
HS Code
9013809000
Model NO.
GAG-E211
Trademark
Gaoge
Specification
Studio size: 600x600x600 (LxDxH)
Origin
China
HS Code
9013809000
Product Desciption
1. Equipment use conditions
| The ambient temperature | 5 ° C ~ +35 ° C (average temperature within 24 hours ≤ 35 ° C) |
| Ambient humidity | ≤85%R.H |
| The operating environment needs to be below room temperature of 35 degrees and well ventilated, the machine can't be placed anywhere before and after the placement of 80 cm each | |
2. Main Specifications
| Studio size(mm) | Studio size: 600× 600× 600(L×D×H) Dimensions(mm): 1350X 1200X 1750(L×D×H) |
| Temperature range | normal temperature ~ 80 ° C (can be customized) |
| Blackboard temperature | 65 ° C (deviation ± 3 ° C) |
| Temperature fluctuation | ≤±0.5°C |
| Temperature uniformity | ≤±2.0°C |
| Humidity range | 38-90% |
| Glass filter | borosilicate glass |
| Xenon light source | imported air-cooled xenon arc source |
| Xenon lamp power | 1.8 KW (air-cooled full solar spectrum long arc xenon lamp) Life: 1200 hours |
| Total number of lamps | 3 |
| Rainfall time | 1~9999 minutes, continuous rainfall adjustable |
| Rainfall period | 1 to 240 minutes, interval (break) rainfall is adjustable |
| Spout nozzle aperture | Ф0.8mm (return water with ultra-fine filter to prevent nozzle blockage) |
| Rain water pressure | 0.12~0.15kpa |
| Spraying cycle (spraying time/no watering time) | 18min/102min or 12min/48min (spraying time/no spraying time) spraying pressure 0.12~0.15Mpa |
| Heating power | 4.5KW |
| Humidification power | 3KW |
| Distance from the center of the arc to the sample | 250~300mm effective exposure area 6400cm2 |
| Sample tray size | 75 × 300mm |
| He photoperiod can be continuously adjusted for 1 to 999 hours.1 | |
| Spectral wavelength | 290nm ~ 800nm |
| Irradiance range | 1200W/Square meter |
| This product is designed and manufactured strictly according to the technical parameters of GB/T16422.2-99 (2007). | |
| At the same time, it meets the standards (GB/T1865-97 (2007), GB/T9344-88, GB/T16422.2-99, GB/T2423.24-1995, ASTMG155, ISO10SB02/B04, SAEJ2527, SAEJ2412) | |
3. Equipment use:
The use of Xenon arc lamps that simulate the full sunlight spectrum to reproduce destructive light waves in different environments provides environmental simulation and accelerated testing for scientific research, product development and quality control.
The SN type Xenon lamp weatherproof test chamber can be used to select new materials, change existing materials or evaluate the change of durability after changing the composition of materials. It can simulate the production of materials exposed to sunlight under different environmental conditions. Variety.
The aging test is carried out by exposing the material sample to the illumination and heat radiation of the xenon arc lamp to evaluate the light and weather resistance of some materials under the action of a high temperature light source. It is mainly used in automobiles, paints, rubber, plastics, pigments, and adhesives. Agents, fabrics, etc.
4. Cooling System
4.1 Refrigeration system and compressor
Refrigeration compressor: Originally imported French "Taikang" fully enclosed refrigeration unit.
Cooling method: air cooling
Refrigerant: Environmentally friendly refrigerant
Main refrigeration accessories: Japan "Lugong" solenoid valve; US "Emerson" drying filter.
Air-cooled condensers and fin multi-stage evaporators of high quality domestic and foreign brands.
4.2 Refrigeration system advantages
(1) Improved lubrication performance and lower piston temperature for greater reliability;
(2) Streamlined airframe improves airflow management; reduces pressure and improves cooling efficiency;
(3) The top unloading valve provides a continuous minimum drain tube pulse;
(4) SENTRONIC provides a reliable lubrication protection system;
(5) Use environmentally friendly refrigerants R23 and R404A (excluding CFC) that are not prohibited by the Montreal Convention or the London Amendment.
5. Box structure and main features: Introduction to the overall structure
(1)The whole casing is made of stainless steel; the inner wall material of the test chamber is SUS304 advanced anti-corrosion mirror stainless steel plate, which has reasonable structure design, excellent manufacturing process and beautiful appearance inside and outside. According to the temperature requirements of the laboratory, the thickness of the insulation layer is designed to be 100mm.(The top is a light source box, which adopts advanced design and is easy to open for maintenance and repair of the lamp. )
(2) The insulation material between the inner box and the outer box is high-quality super-fine glass fiber insulation cotton, which plays a good role in heat preservation of cold or heat.
(3) The imported sealing material and the unique silicone sealing structure are used between the door and the door frame, and the sealing performance is good.
(4) Test box door structure: single door. Door locks, hinges and other hardware accessories are "KUNLONG" original accessories.
(5) The air duct in the box adopts a double circulation system, which consists of a long shaft axial flow fan, a stainless steel multi-wing centrifugal wind wheel and a circulating air passage. The temperature in the upper and lower air inlet boxes is uniform, which improves the air flow, heating and cooling capacity, greatly improved the temperature and humidity uniformity of the test box.
(6) Blackboard temperature: bimetallic blackboard thermometer;
(7) Humidification method: external isolation type all stainless steel shallow surface evaporation humidifier;
(8) Heating system: fully independent system, nickel-chromium electric heating heater;
(9) Water supply system: humidified water supply is automatically controlled by water pump;
(10) Temperature and Humidity Circulation System: It adopts special high temperature resistant low noise long axis fan motor, high temperature resistant stainless steel multi-wing impeller, to achieve vertical convection vertical diffusion cycle;
(11) 4 nozzles installed on the top of the studio;
(12) Irradiance control: The irradiance can be obtained by the automatic control of the power by the radiometer (accurate than the manual measurement method, because the lamp test cycle will have light decay and cannot guarantee a more accurate irradiance);
(13) The panel directly displays the current tube irradiance and cumulative radiation intensity;
6. Safety device
(1) fan overheat protection
(2) the overall equipment phase / reverse phase protection
(3) refrigeration system overload protection
(4) refrigeration system overpressure protection
(5) over temperature protection
the pump overheating, overcurrent protection
(7) other leaks
(8) lack of water instructions
(9) Automatic shutdown after fault alarm
7. Power and overall power
(1) Voltage: 380±10V, 50±1% Hz (lamp light voltage: DV 170±10V) Power: 9KW
(2) Machine noise:≤70db
(3)Weight:480kg
(4) Random attachment
a,fuse 3
b,Wet ball weather gauze 5
c,Xenon lamp 3
d,Operation Manual 1
8. The second part, key component configuration
8.1 Structure and configuration:
(1) Integral structure: consists of test chamber, heating / / lighting / system / electrical control
(2) Box material: 304 stainless steel.
(3) Box body gallbladder: SUS304 stainless steel plate
(4) Door: Silicone rubber tight seal.
(5) Sample rack: all stainless steel, adjustable specimen fixed position, standard stamping forming template
(6) Controller: Programmable touch screen controller
(7) Convection: long axis special motor
(8) Device operation timing controller
(9) Blackboard thermometer BPT or black standard thermometer BST
(10) Special filter (light through the glass window)
9.Corporate partners
10.Company Certification
11.Company profile
12.Service Process:
| Free Pre-Sales Consulting GAOGE-TECH offer 12 hours quick pre-sales response and free consulting. Any kind of technical support is available for users. We offer progressing solution design to all the users. |
| 20 Days Quick Delivery We have mass production and stock & ready item, for these items, we offer 20 days quick delivery time. For big machine and special requirement, we will trade you as the priority customer and to produce your cargo for the first time. |
| 1 Year Quality Guarantee GAOGE-TECH 1-year guarantee for our machine. And to become you are our long-term customer, we will prolong the quality guarantee period especially for you. |
| 12 hours Quick Feedback & After-Sales Service We will offer "Training Video", "Instruction Book", "Operation Manual" to you, which is easy to learn and operate. We will supply brochures for simple trouble-shootings of the machine, which will help you deal with the common problems happened to the machine. We will offer plenty of technical support online, just like detailed technical and installation instructions. For example, when you meet a maintenance problem, we will make a video with completed and detailed operation process according to the problem, it just seems that I am on the spot by your side to instruct you how to deal with the problem. |
| Quick Back-up Parts Available & Technical Assistance Our extensive inventory of spare parts means replacements get shipped to you as quickly as possible. Immediate technical assistance is only an email or phone call away. |
| Free Training Service We insist that our customers receive personal, hands-on training with every machine we sell. This training is free, and we will work with you for as long as it takes to ensure you feel comfortable operating your machine. We pride ourselves on our expertise and our ability to educate our customers in the installation, proper maintenance, and most efficient use of GAOGE-TECH machines. |
| Special Designing, Customized, OEM Order is accepted GAOGE-TECH is rather willing to help you to realize your special testing and requirement by our innovative ability. So please do not hesitate to contact us when you need special design or customized machine and OEM machines. |
13.Packaging & Shipping
1.Inside is covered with plastic film before we put them into the plywood, which has good transparency, impact resistance, tasteless and prevent moisture corrosion.
2.Outside is strong plywood and accord with export standards.
3.We can ship testing equipment according to customer request.
You Might Also Like
10OZ Cotton Polyester Spandex For Jeans
Auto Wiper Motor for Renault Master, 7701050898
Indoor Commercial Trampoline Center for Shopping Mall
Neonpro Series Black White Transparent Straight Type Sleeve ......
Reliable DDP Railway Shipping From Yiwu Shenzhen to EU DDP t......
Ont T24 Plank Support Bench Press, Chest Push Bench Fitness ......
Large Capacity Fashion Stylish Gift Women Ladies Work Shoppi......
New Factory Price High Quality Pin Type Forklift Forks for S......
Natural Birch Wood Double Pointed Sticks
Prefabricated Steel Structure House Project for Logistics Ce......
OEM ODM Customized Home Workout Equipment Resistance Band fo......
Nonwoven Fabric Best Cheap Painter Absorbent Cotton Fleece