Products

Automatic Powder Coating Feed Center for Fast Color Change

China Automatic Powder Coating Feed Center for Fast Color Change, Find details about China Powder Feed Center, Powder Supply Center from Automatic Powder Coating Feed Center for Fast Color Change

Model NO.
colo-6000pc
Heating Mode
Diesel
Paint Mist Treatment
Dry-type
Condition
New
Use
Powder Supply
Working
Automatic
Voltage
110V/220V
Delivery Time
14 Days
Trademark
HICOLO
Transport Package
Wooden Carton
Specification
1500x1200x130mm
Origin
China
HS Code
8424899990
Model NO.
colo-6000pc
Heating Mode
Diesel
Paint Mist Treatment
Dry-type
Condition
New
Use
Powder Supply
Working
Automatic
Voltage
110V/220V
Delivery Time
14 Days
Trademark
HICOLO
Transport Package
Wooden Carton
Specification
1500x1200x130mm
Origin
China
HS Code
8424899990
our powder center for recovery in automatic powder coating with the feature as follows:

1.easy for color change ,don't need to clean the gun one by one
2.have sensor for powder position,don't worry about the powder is empty
3.could use the powder box directly.
Technical parameters
Power supply voltage1p 220VAC (110V)
power500w
Air pressure0.6-0.8MP
Can be equipped with up to 16 powder pump


Automatic Powder Coating Feed Center for Fast Color Change
Automatic Powder Coating Feed Center for Fast Color Change

Powder supply center
Automatic Powder Coating Feed Center for Fast Color Change


How does the powder feed center work?
Put the powder hopper full with powder in the powder supply room, and on the powder hopper vibration platform,
and then access the air for the fluidization of powder. Vibration platform will vibrate at intervals.
Powder particles generated in the process of fluidization goes through the rear ventilation pipe so that powder doesn't spill.
In the process of powder gun working, the powder pump station will be decreased, so that the suction tube is inserted into fluidizing powder.

Control the pump station decreasing by powder detecting sensor, so that the powder suction tube keep been inserted into the sufficient fluidization powders.
With powder level declining, when the powder level reaches the lower limit, the powder center of the electronic control system
will issue audible alarm and on the touch screen with character note. Remind the operator low powder level alarm, and he or she needs to add powder.
In the cleaning process, lower the pump platform down to the powder cleaning level. Open and clear the powder. Powder center automatically blowbacks the
powder gun hoses of both sides alternately.  

If change the color, rise the pump station to higher point for the powder hopper can be easily removed, and then carried the powder hopper with required color in.

More details,please contact with us.

You Might Also Like