200K BTU Wall mount Axial fan Hanging unit heater with hot water Coil Heat exchanger
100000BTU Axial Fan forced hot water heater unit
Water to air aluminium finned copper heat exchanger for USA market

Water to air heat exchanger

Water to water sidearm heat exchanger

Water to water threaded ports sidearm heat exchanger

Water to water sweat ports sidearm heat exchanger

These compact units are designed to maximize heat transfer by utilizing a series of 3/8" copper tubes with a high density of aluminum fins.

These fins are spaced such that the fin density is 12 fins per inch.

This design enables heating loads of 50,000-60,000 Btu per square foot (please see performance chart).

Despite such high fin density there is minimal pressure drop through these coils.

This heat exchanger is crafted of stainless steel.

Because water flows through this exchanger at such a high rate of speed, it cleans itself.

The model of heat exchanger you will require is based on the volume of water that you need it to handle.

Applications thaools, hot tubs, and waste water. This particular heat exchanger features a capacity of 60,000 BTU/H.

 heat exchangers such as this one can be used for include oil coolers, transmission and engine coolers, boiler sample coolers

Raw Material : copper tube, aluminium fin, galvanized plate and stainless steel plate

Size of copper pipe :diameter :7.94/9.52mm, Inner grooved Or smooth tube .

Auminium foil : Hydrophilic or bare

Fin type :Louver Fin, Flat fin, corrugated fin

Pitch of fins can be adjusted between 1.8-5.8mm

Pitch of holes and pitch of rows :25x21.65mm,19.05x12.7mm,25.4x22mm ,25.4X19.05mm,25.4X15.88mm,50x50mm,38x33mm,31.75x27.5mm,21x12.7mm

No less than 3.0MPA Air Pressure nitrogen leak test

Suitable for R134A,R22,R404A,R407C refrigerant and so on.

Usage : For boilers, outdoor installed furnaces, composition of stoves
 

Materials:

Tube coil: 3/8" seamless copper (3row)

Plate fin: Aluminum

Core housing: Galvanized steel

Header: 1" ID Copper

Different size available according to client's request.

We also could fix casing and fan motor on it.

Specification : 

air cooled condenser,copper condenser,air-cooled condenser,fin tye condenser,aluminum condenser for refrieration and air conditioning appliances,refrigeration part...

If you have any interest, pls feel free to contact with us at any time.

We can supply copper evaporator and copper condensers according to your drawings or samples.

Our evaporator and condensers are being supplied to Norway, Russia, Ukraine, Korea, Japan, Pakistan, India, Malaysia, Indonesia, Sri Lanka, Bangladesh, Saudi arabia, Lebanon, Syria, Turkey, Italy, Britain, Spain, Portugal, USA, Chile, Peru, Argentina, Brazil....for many years.

We can supply heat exchanger according to your drawings or samples.

Our products are being supplied to Russia, Ukraine, Korea, Japan, Pakistan,  India, Malaysia, Indonesia, Sri Lanka, Bangladesh, Saudi arabia, Lebanon, Syria, Turkey, Italy, Britain, Spain, Portugal, USA, Chile, Peru, Argentina, Brazil....for many years.

Please send the specification  your request, I will send our competitive  prices for your reference.