China 5t/D A4 Paper Making Machine Newsprinting Paper Making Machine for Office Copy Paper, Find details about China Machine, Paper Machine from 5t/D A4 Paper Making Machine Newsprinting Paper Making Machine for Office Copy Paper
Brief introduction :
1. Raw material: waste paper,wood pulp
2 output paper style: A4 paper;office paper;copy paper;printing paper
3. Capacity: 3-5T/D;
4. Output paper weight: 60-100g/m2
5.net paper width: 1200mm;
6. Width of copper cylinder: 1450mm
7. Rail gauge:1800mm;
8. Drive way: AC inverter speed,section drive;
/D a4 paper making machine newsprinting paper making machine for office copy paper
The structure and specifications of main equipment:
1.Cylinder section:
stainless steel cylinder mould 2(pcs),couch roll 3(pcs),reverse roll 1 (pcs), coated by rubber.
2.press section:
marble roll 1 pcs, rubber roll 1 pcs, ccoated by rubber,pneumatic loading device.
3. Dryer section:
alloy dryer can 2 pcs,touch roll 1pcs,coated by rubber,pneumatic loading device.
4.Drive and control section:
AC inverter speed,section drive;
machine for making rolling paper
All Equipments:
NO. | Item | qty(set) |
1 | Paper Making Machine | 1 |
2 | double layer dryer can Exhausted hood | 1 |
3 | Propeller fan | 1 |
4 | Roots vacuum pump | 1 |
5 | Suction box | 2 |
6 | 1092mm winding machine | 1 |
7 | 1092mm calendar(3 rolls) | 1 |
8 | 1092mmrewind machine | 1 |
9 | High consistency hydrapulper | 1 |
10 | High frequency vibration screen | 1 |
11 | double disc Refiner | 1 |
12 | sand remover(6 set) | 1 group |
12 | Potcher | 1 |
13 | Impeller | 4 |
14 | centrifugal screen | 1 |
15 | 4 inch pulp pump | 3 |
16 | 6 inch pulp pump | 3 |
17 | air pump cabinet | 1 |
18 | inverter control cabinet | 1 |
19 | work table | 1 |
20 | 2 ton boiler(burn coal/oil/natural gas) | 1 |
No. | Item | Function |
Pulp making section | ||
1 | D type Hydra-pulper | To break the waste paper into pulp and drop down the impurity and pins |
2 | High density pulp cleaner | To separate and sieve the small stone,staples,heavy impurity in the pulp |
3 | Fiber separator | To beating pulp again and separate long and short fiber |
4 | Vibrating screen | To separate and remove the small impurity(such as broken plastic tape,foam,etc) |
5 | Pulp refiner | To grind pulp fiber |
6 | Low concentration pulp cleaner | To remove the sand and tiny impurity in the water and pulp |
7 | Pressure screen | To screening pulp fiber |
8 | Impeller | To stir the pulp and make sure the pulp and water mixed well |
9 | Pulp pump | To provide the pulp for the needed machine |
Paper making section | ||
10 | Cylinder mold part | To forming wet paper web |
11 | Vacuum dewatering part | To absorb the water in the wet paper |
12 | Press part | To dewatering by mechanical gravity press force |
13 | Dryer section part | To dry wet paper |
14 | Sizing press part | To glue paper surface to improve paper quality strength and stop printing ink spreading |
15 | Dryer section part | To dry paper after gluing wet |
16 | Calendering part | To glazing paper surface,control paper thickness,tightness |
17 | Winding part | To reeling output paper be a jumbo paper roll |
18 | Paper rewinding part | To rewind the jumbo roll paper to different size (width&diameter) according to your requirement |
Boiler section | ||
19 | Gas/diesel/coal boiler | To provide high temperature and pressure steam to dryer to dry paper |