Cell Culture Plate PS Material Gamma Sterile Rnase&Dnase Free Tc Treatment
China Cell Culture Plate PS Material Gamma Sterile Rnase&Dnase Free Tc Treatment, Find details about China Prime Virgin Polystyrene, Increase Thermal Consistency from Cell Culture Plate PS Material Gamma Sterile Rnase&Dnase Free Tc Treatment
Basic Info.
Model NO.
6/12/24/48/96-well
Character
Dnase & Rnase Free, Human DNA Free
Working Volume
0.2/0.5/1/2/3ml
Culture Area
9.6cm2/3.8cm2/1.9cm2/0.75cm2/0.33cm2
Wells
6-Well 12-Well 24-Well 48-Well 96-Well
Bottom
Flat
Rnase&Dnase Free
Yes
Trademark
Biologix
Transport Package
1 /Bag, 50 Bags/Case
Specification
6/12/24/48/96-Well
Origin
China
Model NO.
6/12/24/48/96-well
Character
Dnase & Rnase Free, Human DNA Free
Working Volume
0.2/0.5/1/2/3ml
Culture Area
9.6cm2/3.8cm2/1.9cm2/0.75cm2/0.33cm2
Wells
6-Well 12-Well 24-Well 48-Well 96-Well
Bottom
Flat
Rnase&Dnase Free
Yes
Trademark
Biologix
Transport Package
1 /Bag, 50 Bags/Case
Specification
6/12/24/48/96-Well
Origin
China
Product Desciption
Cell Culture Plates
Features
--Constructed of prime virgin polystyrene
--Plate cover design minimizes the risk of cross contamination
--Thin-walled well bottoms increase thermal consistency, reducing the edge effect
--Flat well bottoms provide excellent clarity for microscopic examination of samples
--Gamma radiation sterilized
--Non-pyrogenic, non-cytotoxic
--DNase & RNase free, human DNA free
1.What are the main factors that influence the maximum centrifugal acceleration force?
Use of organic solutions, temperature below 0°C, centrifuging without centrifuge adapter, etc. Conduct a trial run to determine proper conditions before any critical use begins.
The RCF (relative centrifugal force) or G ratings for our disposable centrifuge tubes have been established at room temperature using tubes filled to nominal capacity with water and centrifuging for 30 minutes. recommended carriers, adapters, and cushions that fully support the tubes. If an angle head rotor is used or proper support is not provided, G values will be lower.
Do not confuse speed or revolutions per minute (RPM) with relative centrifugal force (RCF). Instructions for centrifuging a sample at a given RPM and time are incomplete unless the rotor or radius is specified. Protocols should always state the time and RCF value for centrifuging a sample.
2.What are autoclaving guidelines of plastics?
To ensure successful steam sterilization of your plastic labware please adhere to the following guidelines: PLEASE NOTE THAT NOT ALL PRODUCTS ARE AUTOCLAVABLE. Autoclave plastic consumables at 121°C and 15psi/1 atm for 15 minutes. Do not use a dry cycle, as this may cause deformation or weakening of the plastic. Allow temperature within the autoclave to return to 80°C or below before removing products.
3.What are Biologix's Commitments to Quality?
We look at quality from every angle in terms of functionality, safety, purity, formulation, consistency, manufacturing, customer service, technical support, and much more. According to the detailed QA/QC procedures for our manufacturing facility, each and every product is traceable by lot, regardless of packaging format. Products must go through a five-step human inspection before being released for packaging. Biologix applies the most stringent standards to certify that products are free from RNase, DNase, endotoxin (pyrogens), etc. In addition to being ISO 9001:2008, CE compliant, we also make available to our customers lot-specific certificates such as Sterilization Certificates, Nuclease Free Certificates, Certificates of Origin, etc.
Features
--Constructed of prime virgin polystyrene
--Plate cover design minimizes the risk of cross contamination
--Thin-walled well bottoms increase thermal consistency, reducing the edge effect
--Flat well bottoms provide excellent clarity for microscopic examination of samples
--Gamma radiation sterilized
--Non-pyrogenic, non-cytotoxic
--DNase & RNase free, human DNA free
Ordering Information
| Cat # | Wells | External Dimensions W x Lx H (mm) | Well Dimensions Dx H (mm) | Culture Area | Working Volume | Sterile | Unit |
| 07-6006 | 6-well | 85.4x127.6x20.2mm | 35x17.5mm | 9.6cm2 | 3ml | YES | 1 Piece/Pack, 50 Packs/Case |
| 07-6012 | 12-well | 85.4x127.6x20.2mm | 21.9x17.5mm | 3.8cm2 | 2ml | YES | 1 Piece/Pack,50 Packs/Case |
| 07-6024 | 24-well | 85.4x127.6x20.2mm | 15.5x17.5mm | 1.9cm2 | 1ml | YES | 1 Piece/Pack,50 Packs/Case |
| 07-6048 | 48-well | 85.4x127.6x20.2mm | 9.75x17.5mm | 0.75cm2 | 0.5ml | YES | 1 Piece/Pack,50 Packs/Case |
| 07-6096 | 96-well | 85.4x127.6x14.4mm | 6.5x10.8mm | 0.33cm2 | 0.2ml | YES | 1 Piece/Pack,50 Packs/Case |
1.What are the main factors that influence the maximum centrifugal acceleration force?
Use of organic solutions, temperature below 0°C, centrifuging without centrifuge adapter, etc. Conduct a trial run to determine proper conditions before any critical use begins.
The RCF (relative centrifugal force) or G ratings for our disposable centrifuge tubes have been established at room temperature using tubes filled to nominal capacity with water and centrifuging for 30 minutes. recommended carriers, adapters, and cushions that fully support the tubes. If an angle head rotor is used or proper support is not provided, G values will be lower.
Do not confuse speed or revolutions per minute (RPM) with relative centrifugal force (RCF). Instructions for centrifuging a sample at a given RPM and time are incomplete unless the rotor or radius is specified. Protocols should always state the time and RCF value for centrifuging a sample.
2.What are autoclaving guidelines of plastics?
To ensure successful steam sterilization of your plastic labware please adhere to the following guidelines: PLEASE NOTE THAT NOT ALL PRODUCTS ARE AUTOCLAVABLE. Autoclave plastic consumables at 121°C and 15psi/1 atm for 15 minutes. Do not use a dry cycle, as this may cause deformation or weakening of the plastic. Allow temperature within the autoclave to return to 80°C or below before removing products.
3.What are Biologix's Commitments to Quality?
We look at quality from every angle in terms of functionality, safety, purity, formulation, consistency, manufacturing, customer service, technical support, and much more. According to the detailed QA/QC procedures for our manufacturing facility, each and every product is traceable by lot, regardless of packaging format. Products must go through a five-step human inspection before being released for packaging. Biologix applies the most stringent standards to certify that products are free from RNase, DNase, endotoxin (pyrogens), etc. In addition to being ISO 9001:2008, CE compliant, we also make available to our customers lot-specific certificates such as Sterilization Certificates, Nuclease Free Certificates, Certificates of Origin, etc.
You Might Also Like
Fashion Women Magic Tools Foam Sponge Device Quick Messy Don......
Auto / Car Spare Parts Suspension Strut Mounting for Toyota ......
Portable USB Mini Rechargeable USB Fan Lithium Battery Fan
Walmart Pant Hanger, Popular Child Plastic Bottom Hanger
Monobloc Filler and Capper for Gel Antiseptic Handwash
Car Accessories Air Assembly Spring Shock Absorber for Porsc......
Indoor Pantallas -Advertising Full Color LED Video P4.81 Pan......
Diesel Engine Rotary Screw Air Compressor for Sandblaster
Promotional 1oz Neoprene with Carabiner Hand Sanitizer Holde......
51002 Ariste New Design 7PCS Plastic Craft Clay Green Model ......
Paper Shopping Bag with Logo Wholesale