Cyj Series Dumbbell Specimen Machine

China Cyj Series Dumbbell Specimen Machine, Find details about China Impact Test, Impact Sample Notch Broacher from Cyj Series Dumbbell Specimen Machine

Basic Info.

Model NO.

CYJ Series

Control

Manual Control

Weight

100-500Kg

Power Source

AC380V

Oil Cylinder Position

Under

Power

380V

Trademark

SHENLI

Transport Package

Wooden Case with Fumigation Certificate

Specification

1000kN

Origin

Shanghai, China

HS Code

90241090

Model NO.

CYJ Series

Control

Manual Control

Weight

100-500Kg

Power Source

AC380V

Oil Cylinder Position

Under

Power

380V

Trademark

SHENLI

Transport Package

Wooden Case with Fumigation Certificate

Specification

1000kN

Origin

Shanghai, China

HS Code

90241090

Product Desciption

CYJ series dumbbell sample prototype is mainly used in iron and steel enterprises, universities and other production test metal sheet materials, dumbbell type standard sample processing; punching a wide range of mold selection of a single device can be applied to a variety of shapes of standard samples stamping

Structural principle and main parameters

1, the equipment using the top of the cylinder placement, four column frame structure, powered by the hydraulic source, through the hydraulic valve to control the piston up, under pressure action, the piston pressure to push the punch on the stamping parts of the force and standard mold with the formation of stamping parts Stamping process.
2, after the stamping of the sample automatically fall in the sample collection box
3, stamping range plate thickness 0.2-3mm, sample width 12.5mm20mm (need to replace the mold)
4, punching speed 20-100mm / min
5, the host size 1200X700X1825
6, the motor power 2.2kw
7, power AC380V ± 10% three-phase four-wire
8, weighs about 2500kg
Instructions
1, open the device power.
2, open the pump.
3, prepare the stamping material (in accordance with the width of the mold groove to cut into a long strip of steel)
4, loading stamping materials (the cut into a long strip of material into the mold)
5, stamping (loading stamping material after pressing the foot switch, so that the pressure under the pressure of the mold only to the sample drop)
Repeat steps 3-5 for the next production.