Galvanized Steel Wire Wet Drawing Machine
China Galvanized Steel Wire Wet Drawing Machine, Find details about China Steel Wire Wet Drawing Machine, Steel Wire Drawing Machine from Galvanized Steel Wire Wet Drawing Machine
Basic Info.
Model NO.
LS-15D
Max. Number of Block
21
Certification
RoHS
Condition
New
Trademark
MEYWADA
Transport Package
Wooden Pallet
Origin
China
Model NO.
LS-15D
Max. Number of Block
21
Certification
RoHS
Condition
New
Trademark
MEYWADA
Transport Package
Wooden Pallet
Origin
China
Product Desciption
NO. OF DRAFTS 21
INLET WIRE SIZE 0.8 - 3.5 mm
FINISHED WIRE SIZE 0.2 - 1.20 mm
FINISHING SPEED Upto 600 mts./min. Variable
A.R. IN DIES 14 - 14.5%
BUILT IN A.R. 13.5%
ELONGATION BUILT-IN 15.6%
NO. OF CONE SPINDLES 4 + 1
DIE ARRANGEMENT 5 x 4 + 1
CONE MATERIAL Drawing cones with T.C. Coating.
SURFACE HARDNESS OF CONES 68 - 72 RC
MACHINE SPECIFICATION :
COOLING: Cones & Dies immersed in oil lubricant bath, also for dies forced lubrication and cooling by lube system to be provided at each die.
DIE LUBRICANT Oil base
DIE CASE SIZE 28 x 10 mm suitable for PCD / Diamond Dies.
DIE CASE POCKET IN THE M/C 30 x 12 mm
HEAT EXCHANGER Die Lube Bottom Collection Tank will be connected with Heat Exchanger Unit to remove the heat generated at high speed in order to maintain die lubricating properties of lube.
BEARINGS: Heavy duty ball and taper roller bearings of standard make.
DRIVE Through Timing Belts & Timing Pulleys.
FINISHING CAPSTAN Pulling capstan with T.C. Coating for pulling the wire for Spooler.
DANCER ARM Dancer Arm with Precision Sensors to adjust tension and speed between Machine and Spooler.
COILING Coiling will be done on spooler.
INLET WIRE SIZE 0.8 - 3.5 mm
FINISHED WIRE SIZE 0.2 - 1.20 mm
FINISHING SPEED Upto 600 mts./min. Variable
A.R. IN DIES 14 - 14.5%
BUILT IN A.R. 13.5%
ELONGATION BUILT-IN 15.6%
NO. OF CONE SPINDLES 4 + 1
DIE ARRANGEMENT 5 x 4 + 1
CONE MATERIAL Drawing cones with T.C. Coating.
SURFACE HARDNESS OF CONES 68 - 72 RC
MACHINE SPECIFICATION :
COOLING: Cones & Dies immersed in oil lubricant bath, also for dies forced lubrication and cooling by lube system to be provided at each die.
DIE LUBRICANT Oil base
DIE CASE SIZE 28 x 10 mm suitable for PCD / Diamond Dies.
DIE CASE POCKET IN THE M/C 30 x 12 mm
HEAT EXCHANGER Die Lube Bottom Collection Tank will be connected with Heat Exchanger Unit to remove the heat generated at high speed in order to maintain die lubricating properties of lube.
BEARINGS: Heavy duty ball and taper roller bearings of standard make.
DRIVE Through Timing Belts & Timing Pulleys.
FINISHING CAPSTAN Pulling capstan with T.C. Coating for pulling the wire for Spooler.
DANCER ARM Dancer Arm with Precision Sensors to adjust tension and speed between Machine and Spooler.
COILING Coiling will be done on spooler.
You Might Also Like
Handwork Polyurea Protective Material Th -701
Gasoline Hand Held Concrete Finishing Machine Mini Power Tro......
10A An87330 Three Phase Power Analyzer
3.5" eSATA HDD External Enclosure
Food Grade 304 Stainless Steel Vacuum Flask Thermal Insulati......
CE-Approval! ! ! China DT638B Hades Down Type Dental Chair
Chinese Supplier 10dt Medium Copper Wire Drawing Equipment w......
Proximal Humeral Locking Plate, Small Fragment Plates, Titan......
Industrial Parts Usi Type Seal for Piston and Piston Rod
Long Life Miniature Micro Switch Used in Phone and Designs
N210106267AA Cover