Products

High and Low Air Pressure DTH Bit for DTH Hammer

China High and Low Air Pressure DTH Bit for DTH Hammer, Find details about China DTH Bit, DTH Bits from High and Low Air Pressure DTH Bit for DTH Hammer

Model NO.
COP 32-90mm DTH button bit
Face
Flat, Convex, Concave
Foot Valve
with Foot Valve and Without
High Pressure
1-2.5MPa
Trademark
PRODRILL
Transport Package
Wooden Package
Specification
CE, SGS, ISO: 9001
Origin
China
HS Code
82071990
Model NO.
COP 32-90mm DTH button bit
Face
Flat, Convex, Concave
Foot Valve
with Foot Valve and Without
High Pressure
1-2.5MPa
Trademark
PRODRILL
Transport Package
Wooden Package
Specification
CE, SGS, ISO: 9001
Origin
China
HS Code
82071990
High and Low Air Pressure DTH Bit for DTH Hammer
High and Low Air Pressure DTH Bit for DTH Hammer
High and Low Air Pressure DTH Bit for DTH Hammer


Bit Face Shape Selection:
 
 1. Drop Center Bit
For high penetration rates in soft to medium hard and fissured rock formations. Low to medium air pressures. Maximum hole deviation control.
 2. Concave Face
 The all-around application bit face specifically for medium hard and homogeneous rock formations. Good hole deviation control and good flushing capacity.
 3. Convex Face
 For  high penetration rates in soft to medium-hard with low to medium air pressures. It is the most resistance to steel wash, and may reduce the load and wear on the gauge buttons, but poor hole deviation control.
  4. Flat Face Bit
 This kind of face shape is suitable for hard to very hard and abrasive rock formations in applications with high air pressures. Good penetration rates an resistance to steel wash.  
 
Carbide Button Shape Selection:
1. Semi-Ballistic Buttons
2. Ballistic Button
3. Spherical Button
4. Two-step Button

 
 Type of DTH Bits:

Head Diameter :		64 mm -200 mm (D)
Button Type:Semispherical Button, Ballistic Button, Conical Button
Bit Face:Flat Face, Concave Face, Convex Face, Drop-Center Face
Material:High quality tungsten carbide

Type of Buttons:

Semispherical button:                                           
This type button is suitable for very abrasive and very hard rock formations, it's usually used as gauge buttons of DTH bits.

Ballistic button / Parabolic button: 
This type button is suitable for medium abrasive and hard rock formations, it's usually used as gauge buttons and front buttons of DTH bits.

Conical button:
This type button is suitable for medium abrasive and medium hard formations, it's usually used as front buttons of DTH bits, If the rock is soft, it can be also used as gauge buttons.

You Might Also Like