FW20/25
The whole machine has a compact and reasonable structure, high strength and strong lifting capacity;
Small size, light weight, low requirements for road load-bearing:
At the same time, the turning radius is small, the maneuverability is flexible, and it can be widely used
Used in narrow jobs such as workshops, warehouses, ports, stations, etc.
Engine systemThe engine has good starting performance, stable and reliable work, low fuel consumption and strong power. launch
Machine optional configuration: Xinchai C490BPG; C240; Nissan K21; Yanmar
4TNE92 and so on.
Hydraulic systemOptimized and matched hydraulic system, high work efficiency; equipped with Shantui special hydraulic joints,
High reliability and low oil leakage rate.
Transmission systemIt adopts YQX30A type (JDS30 type) gearbox of domestic first-class manufacturer, failure
Low rate, high transmission efficiency and good maintainability.
Electrical systemLCD instrument, integral control box, waterproof and sealed plug-in structure to ensure the electrical
The system is safe and reliable.
Cab and consoleThe cab is compact and equipped with high-quality seats to give you a comfortable driving experience.
Optional mast typeTwo-level 2m to 6m full range of wide field of view mast / two-level 2m to 6m full range of full range
Free portal / three-level full range of full free portals from 4.5 meters to 6 meters.
Optional attachments for operationSide shifter / pitch fork / paper roll clamp / soft bag clamp, etc.
Applicable working conditions / environmentIt is widely used in stations, ports, airports, factories, warehouses and other occasions. It is mechanized
Efficient equipment for loading and unloading and short-distance transportation.
Fuel consumption / green performanceThe whole vehicle has been optimized to the greatest extent, which improves the work efficiency and effectively reduces
Fuel consumption, energy saving and environmental protection.
Service and maintenance convenienceThe car body reserves special maintenance space to make subsequent maintenance more convenient. Shantui perfect
The service network, timely and thoughtful and enthusiastic service are your tips for using this equipment with peace of mind.
Heart guarantee.
Specification of 2.5 Tons Forklift with 3 meters Lifting Frame |
General | Model | FW20/FW25 | unit |
Load capacity | 2000/2500 | Kg |
load center | 500 | mm |
Power type | Diesel | |
Dimensions | Lift size | 3000 | mm |
Free lift height | 155 | mm |
Fork size | 1070*100*40/1070*122*40 | mm |
Mast tilt angle | 6/12 | ° |
Front overhang | 483 | mm |
Overall dimensions | Length to face of fork | 3595/3655 | mm |
Overall width | 1160 | mm |
Overall height fork lowered | 1990 | mm |
Overall height fork raised | 4030 | mm |
Overhead guard height | 2071 | mm |
Turning radius | 2172/2320 | mm |
Min. right angle aisle width | 2200/2300 | mm |
Performance | Travel speed(full load/no load) | 19/20 | Km/h |
Lift speed with load | 470/450 | mm/sec |
Max. gradeability | 20 | % |
Self weight | 3500/3880 | Kg |
Wheel& tires | Tires | Front | 7.00-12-12PR | |
Rear | 6.00-9-10PR | |
Tread | Front | 970 | mm |
Rear | 970 | mm |
Wheelbase | 1600 | mm |
Ground clearance(full load/no load) | Mast | 85/90 | mm |
Frame | 100/105 | mm |
Drive units& control | Engine | Model | 4D27G31 | |
Rated output | 36.8/2500 | Km/rpm |
Rated torque | 156/1700 | N· m/rpm |
No. of cylinder | 4 | |
Bore× stroke | 90*105 | mm |
Displacement | 2.67 | L |