China 1000kVA Containerized Cummins Diesel Generator with Kta38-G5 Cummins Engine, Find details about China 1000kVA Generator, Diesel Generator from 1000kVA Containerized Cummins Diesel Generator with Kta38-G5 Cummins Engine
Genset Model | GPC1000(S) |
Prime power (50Hz) | 800KW/1000KVA |
Standby power (50Hz) | 880KW/1100KVA |
Frequency/Speed | 50Hz/1500rpm |
Voltage | 220V/380V |
Phase | Three phase, four wires |
Manufacturer | GENLITEC POWER EQUIPMENT |
Engine model | Cummins KTA38-G5 |
Alternator model | Stamford LVI634J |
Controller model | Deepsea DSE7320 |
ENGINE DATA | |
Manufacture | Cummins Engine Company Ltd. |
Picture | |
Model | KTA38-G5 |
Engine speed | 1500rpm |
Engine power (Net) | 1100KVA/1500RPM |
Engine power (Gross) | 1212.5KVA/1500RPM |
Number of cylinders | 12 |
Cylinder arrangement | 60°Vee |
Cycle | 4-troke |
Aspiration | Turbocharged after water-cooled |
Combustion system | Direct injection |
Compression ratio | 13.9:1 |
Bore and Stroke | 159 x 159mm |
Displacement | 37.8 liters |
Fuel system | PB pump_GAC governor /BYC |
Cooling system | Water cooled |
Speed-droop | 5% |
Starting system | DC24V |
FUEL CONSUMPTION | |||||
Genset model | Genset Specification | ||||
KVA | Fuel Consumption 100% load | Noise Level | Fuel Tank | ||
ESP | PRP | L/H | Dba/7M | L | |
HG-C1000 | 1000 | 1100 | 218 | N/A | N/A |
HG-C1000S | 1000 | 1100 | 218 | 75 | N/A |
ALTERNATOR DATA | |
Manufacture | STAMFORD Co., Ltd. |
Picture | |
Model | LVI634J |
Output power | 1000kva |
Number of phase | 3 |
Power factor (Cos Phi) | 0.8 |
Altitude | ≤1000m |
Over speed | 2250RPM |
Number of pole | 4 |
Exciter type | Shunt |
Insulation class | H |
Voltage regulation | ±0.5% |
Sustained short circuit current | 300% (3 IN): 10s |
Total harmonics (TGH/THC) | <4% |
Wave form: NEMA = TIF | <50 |
Wave form: I.E.C = THF | <2% |
Bearing | Single |
Coupling | Direct |
Exhaust silencer | Flexible pipes | Flange | Base frame | Main circuit breaker |
Starting battery | Battery wires | Battery charger | Float battery charger | AVR |
Cooling radiator | Wires diagram | Manual books | Auto control panel | Silent canopy |
Engine & Radiator | Alternator part | Electric part | Fuel tank part | Others |
Water preheater | PMG | ATS | External daily fuel tank | Weatherproof canopy |
Lub oil pre-heater | Anti-condensation heater | Synchronization panel | Automatic fuel pump | Mobile trailer |
Spare parts | Parallel droop | ABB breaker | Oil drain pump | Containerized |
Genset Model | Prime Power | Standby Power | Engine | Fuel consumption | Dimension | Weight | ||
KW | KVA | KW | KVA | CUMMINS | L/h | MM | KG | |
GPC25-I | 20 | 25 | 22 | 28 | 4B3.9-G1 | 7.1 | 1610×730×1285 | 650 |
GPC25-II | 20 | 25 | 22 | 28 | 4B3.9-G2 | 6.7 | 1610×730×1285 | 650 |
GPC40-I | 32 | 40 | 35 | 44 | 4BT3.9-G1 | 10.0 | 1660×730×1285 | 700 |
GPC40-II | 32 | 40 | 35 | 44 | 4BT3.9-G2 | 9.3 | 1660×730×1285 | 700 |
GPC50 | 40 | 50 | 44 | 55 | 4BTA3.9-G2 | 12.9 | 1700×730×1285 | 770 |
GPC56 | 45 | 56 | 50 | 62 | 4BTA3.9-G2 | 14.9 | 1730×730×1285 | 800 |
GPC65 | 52 | 65 | 57 | 72 | 4BTA3.9-G2 | 14.9 | 1730×730×1285 | 800 |
GPC80 | 64 | 80 | 70 | 88 | 4BTA3.9-G11 | 17.6 | 1780×730×1285 | 850 |
GPC94-I | 75 | 94 | 83 | 103 | 6BT5.9-G1 | 21.7 | 2090×785×1440 | 1100 |
GPC94-II | 75 | 94 | 83 | 103 | 6BT5.9-G2 | 22.0 | 2090×785×1440 | 1100 |
GPC100-I | 80 | 100 | 88 | 110 | 6BT5.9-G1 | 21.7 | 2090×785×1440 | 1100 |
GPC100-II | 80 | 100 | 88 | 110 | 6BT5.9-G2 | 22.0 | 2090×785×1440 | 1100 |
GPC105 | 84 | 105 | 92 | 116 | 6BT5.9-G2 | 24.2 | 2090×785×1440 | 1100 |
GPC125-I | 100 | 125 | 110 | 138 | 6BTA5.9-G2 | 27.0 | 2150×785×1440 | 1250 |
GPC125-II | 100 | 125 | 110 | 138 | 6BTAA5.9-G2 | 30.0 | 2220×785×1440 | 1250 |
GPC135 | 108 | 135 | 119 | 149 | 6BTAA5.9-G2 | 30.0 | 2220×785×1440 | 1250 |
GPC150-I | 120 | 150 | 132 | 165 | 6CTA8.3-G1 | 42.0 | 2260×840×1560 | 1600 |
GPC150-II | 120 | 150 | 132 | 165 | 6CTA8.3-G2 | 42.0 | 2260×840×1560 | 1600 |
GPC155 | 124 | 155 | 136 | 171 | 6BTAA5.9-G12 | 34.0 | 2260×840×1560 | 1600 |
GPC188-I | 150 | 188 | 165 | 206 | 6CTA8.3-G1 | 42.0 | 2380×840×1560 | 1800 |
GPC188-II | 150 | 188 | 165 | 206 | 6CTA8.3-G2 | 42.0 | 2380×840×1560 | 1800 |
GPC200 | 160 | 200 | 176 | 220 | 6CTAA8.3-G2 | 45.0 | 2470×965×1650 | 1800 |
GPC250-I | 200 | 250 | 220 | 275 | 6LTAA8.9-G2 | 53.0 | 2570×1000×1650 | 2000 |
GPC250-II | 200 | 250 | 220 | 275 | 6LTAA8.9-G3 | 54.0 | 2570×1000×1650 | 2000 |
GPC313 | 250 | 313 | 275 | 344 | QSM11-G2 | 69.0 | 2920×1000×1800 | 2500 |
GPC360 | 288 | 360 | 317 | 396 | QSZ13-G6 | 72.3 | 2970×1360×2100 | 3000 |
GPC388 | 310 | 388 | 341 | 426 | 6ZTAA13-G3 | 76.5 | 2920×1000×1800 | 2700 |
GPC400 | 320 | 400 | 352 | 440 | QSZ13-G7 | 82.0 | 2970×1360×2100 | 3000 |
GPC438 | 350 | 438 | 385 | 481 | QSZ13-G2 | 78.4 | 2970×1360×2100 | 3000 |
GPC438-I | 350 | 438 | 385 | 481 | 6ZTAA13-G2 | 89.1 | 2970×1360×2100 | 3000 |
GPC438-II | 350 | 438 | 385 | 481 | 6ZTAA13-G4 | 91.4 | 2970×1360×2100 | 3000 |
GPC450-I | 360 | 450 | 396 | 495 | QSZ13-G5 | 84.0 | 3050×1360×2100 | 3200 |
GPC500-I | 400 | 500 | 440 | 550 | QSZ13-G3 | 101.0 | 3050×1360×2100 | 3200 |
GPC250-III | 200 | 250 | 220 | 275 | NT855-GA | 53.0 | 2950×1100×1900 | 2200 |
GPC250-IV | 200 | 250 | 220 | 275 | MTA11-G2A | 55.0 | 2830×1100×1710 | 2200 |
GPC250-V | 200 | 250 | 220 | 275 | MTA11-G2 | 52.0 | 2830×1100×1710 | 2200 |
GPC250-VI | 200 | 250 | 220 | 275 | NTA855-G1 | 59.0 | 2950×1100×1900 | 2800 |
GPC275 | 220 | 275 | 242 | 303 | NTA855-G1A | 61.0 | 2950×1100×1900 | 2850 |
GPC313-I | 250 | 313 | 275 | 344 | MTAA11-G3 | 61.3 | 2980×1100×1710 | 2500 |
GPC313-II | 250 | 313 | 275 | 344 | NTA855-G1B | 68.0 | 3060×1100×1710 | 3000 |
GPC313-III | 250 | 313 | 275 | 344 | NTA855-G2 | 68.0 | 3060×1100×1710 | 3000 |
GPC344 | 275 | 344 | 303 | 378 | NTA855-G2A | 72.0 | 3060×1100×1710 | 3000 |
GPC350 | 280 | 350 | 308 | 385 | NTA855-G4 | 75.0 | 3060×1100×1710 | 3100 |
GPC365-I | 292 | 365 | 321 | 402 | NTAA855-G7 | 86.0 | 3060×1230×2000 | 3150 |
GPC365-II | 292 | 365 | 321 | 402 | KTA19-G2 | 83.0 | 3100×1310×2130 | 3500 |
GPC400 | 320 | 400 | 352 | 440 | QSNT-G3 | 70.5 | 3100×1310×2130 | 3500 |
GPC450-II | 360 | 450 | 396 | 495 | KTA19-G3 | 97.0 | 3140×1310×2130 | 3600 |
GPC500-II | 400 | 500 | 440 | 550 | KTA19-G3A | 106.9 | 3250×1310×2130 | 4000 |
GPC500-III | 400 | 500 | 440 | 550 | KTA19-G4 | 107.0 | 3250×1310×2130 | 4000 |
GPC525 | 420 | 525 | 462 | 578 | KTAA19-G5 | 113.0 | 3470×1550×2200 | 4100 |
GPC575-I | 460 | 575 | 506 | 633 | KTAA19-G6 | 118.5 | 3470×1550×2200 | 4350 |
GPC625 | 500 | 625 | 550 | 688 | KT38-G | 140.0 | 4050×1700×2500 | 6500 |
GPC650 | 520 | 650 | 572 | 715 | QSKTAA19-G4 | 143.0 | 3600×1550×2500 | 4700 |
GPC713 | 570 | 713 | 627 | 784 | KTA38-G1 | 160.4 | 4200×1700×2500 | 6500 |
GPC725 | 580 | 725 | 638 | 798 | KT38-GA | 168.2 | 4200×1700×2500 | 6500 |
GPC750 | 600 | 750 | 660 | 825 | KTA38-G2 | 167.0 | 4200×1700×2500 | 6500 |
GPC800 | 640 | 800 | 704 | 880 | KTA38-G2B | 167.3 | 4200×1700×2500 | 6500 |
GPC910 | 728 | 910 | 801 | 1001 | KTA38-G2A | 191.0 | 4300×1700×2500 | 7000 |
GPC1000 | 800 | 1000 | 880 | 1100 | KTA38-G5 | 209.0 | 4250×2060×2500 | 7200 |
GPC1250-I | 1000 | 1250 | 1100 | 1375 | QSK38-G5 | 274.0 | 4470×2080×2820 | 8200 |
GPC1250-II | 1000 | 1250 | 1100 | 1375 | KTA50-G3 | 254.0 | 4830×2060×2350 | 8800 |
GPC1375 | 1100 | 1375 | 1210 | 1513 | KTA50-G8 | 289.0 | 5430×2120×2550 | 9600 |
GPC1500 | 1200 | 1500 | 1320 | 1650 | KTA50-GS8 | 308.8 | 5430×2120×2550 | 9800 |
GPC1875 | 1500 | 1875 | 1650 | 2063 | QSK60G3 | 371.0 | 5710×2200×2650 | 15152 |
GPC2000 | 1600 | 2000 | 1760 | 2200 | QSK60G4 | 394.0 | 5710×2200×2650 | 15366 |
Δ FAQ (FREQUENCY ASKED QUESTION)
Question: What's your warranty period?
Answer: Our payment terms is 1 year or 1000 running hours whichever comes first. But based on some special project, we can extended our warranty period.
Question: Does your generators has global warranty?
Answer: Yes, most of our products like Cummins, Perkins, Doosan power generator enjoy the global warranty service. And the alternator we use like Leroysomer, Stamford, marathon also enjoy the global warranty service, so you do not need to worry about the aftersales service.
Question: Do you accept OEM/ODM service?
Answer: Yes, we can accept OEM.
Question: What's your payment terms?
Answer: We can accept T/T 30% in advance, and the balance 70% shall be paid before shipment or L/C at sight, L/C deferred payment terms or west union.
Question: What's your delivery time?
Answer: Our normal delivery time is 25 working days. But if your order is some special engine and alternator, then the delivery time is longer.