Polycarbonate PC for Automotive Lighting

China Polycarbonate PC for Automotive Lighting, Find details about China 100% Vrigin PC Material, PC Granulate from Polycarbonate PC for Automotive Lighting

Model NO.
AL2447
Plastic Forming Method
Blow Molding
Color
White
Trademark
bayer
Transport Package
25kg/Bag
Specification
1*1
Origin
China Mainland
HS Code
3907400000
Model NO.
AL2447
Plastic Forming Method
Blow Molding
Color
White
Trademark
bayer
Transport Package
25kg/Bag
Specification
1*1
Origin
China Mainland
HS Code
3907400000
Grades / Blow molding MVR (300 °C/1.2 kg) 2.0 cm³/10 min; blow molding; high viscosity; branched; food contact quality; extrusion blow molding; injection stretch blow molding; available in transparent colors only; water bottles
ISO Shortname ISO 7391-PC,B,(,,)-05-9
 

Property Test Condition Unit Standard typical Value

-

Rheological properties
Melt volume-flow rate300 °C; 1.2 kgcm³/10 minISO 11332.0
Molding shrinkage, parallel60x60x2 mm; 500 bar%ISO 294-40.75
Molding shrinkage, normal60x60x2 mm; 500 bar%ISO 294-40.8
Melt mass-flow rate300 °C; 1.2 kgg/10 minISO 11332.5
Mechanical properties (23 °C/50 % r. h.)
Tensile modulus1 mm/minMPaISO 527-1,-22300
Yield stress50 mm/minMPaISO 527-1,-264
Yield strain50 mm/min%ISO 527-1,-26.6
Nominal strain at break50 mm/min%ISO 527-1,-2> 50
Stress at break50 mm/minMPaISO 527-1,-265
Strain at break50 mm/min%b.o. ISO 527-1,-2100
Flexural modulus2 mm/minMPaISO 1782300
Flexural strength2 mm/minMPaISO 17894
Flexural strain at flexural strength2 mm/min%ISO 1787.2
Flexural stress at 3.5 % strain2 mm/minMPaISO 17870
Charpy impact strength23 °CkJ/m²ISO 179-1eUN
Charpy impact strength-30 °CkJ/m²ISO 179-1eUN
Charpy impact strength-60 °CkJ/m²ISO 179-1eUN
Charpy notched impact strength23 °C; 3 mmkJ/m²ISO 7391/b.o. ISO
179-1eA
75P
Charpy notched impact strength-30 °C; 3 mmkJ/m²ISO 7391/b.o. ISO
179-1eA
20C(P)
Izod notched impact strength23 °C; 3 mmkJ/m²ISO 7391/b.o. ISO 180-A65P
Izod notched impact strength-30 °C; 3 mmkJ/m²ISO 7391/b.o. ISO 180-A55P(C)
Puncture maximum force23 °CNISO 6603-25500
Puncture maximum force-30 °CNISO 6603-26400
Puncture energy23 °CJISO 6603-255
Puncture energy-30 °CJISO 6603-260
Ball indentation hardness N/mm²ISO 2039-1108