Portable Oil and Gas Pipe Tube End Facing Beveling Machine
China Portable Oil and Gas Pipe Tube End Facing Beveling Machine, Find details about China Weld Preparation, Pipe Bevels from Portable Oil and Gas Pipe Tube End Facing Beveling Machine
Basic Info.
Model NO.
T18
Power Source
Electric
Layout
All Position
Automation
Semi Automatic
Customized
Customized
Cutting Model
Blade
Cutting Type
Cold Cutting
Cutting Material
CS/Ss/as/Other Metal
Trademark
Watt
Transport Package
Wooden Case
Origin
China
HS Code
846190
Model NO.
T18
Power Source
Electric
Layout
All Position
Automation
Semi Automatic
Customized
Customized
Cutting Model
Blade
Cutting Type
Cold Cutting
Cutting Material
CS/Ss/as/Other Metal
Trademark
Watt
Transport Package
Wooden Case
Origin
China
HS Code
846190
Product Desciption
Pipe & Flange ~ Cutting ~ Beveling ~ Facing ~ Drilling ~ Boring
S Series Inner Mounted Pipe Beveling Machine
Model:T18
Working range: Pipe ID 6-18inch
Wall thinckness: 6-20mm
Driveing Type: Pneumatic,Electric,Numerical,Hydraulic.
Product Show
Production Description
This series is Welding Preparation Portable Electric Pipe Beveling Machine with the following advantages:
Order Guide
Before you place order to us, please let us know the following information:
1. Measure the size of the pipe to be machined, select the swelling block according to the swelling block diagram, install it on the wedge block, tighten the bolt, make sure it is secure and loose.
2. According to the processing requirements, select the tool table in the appropriate angle of the tool, installed in the machine cutter, tighten the bolt, fixed tool.
3. Rotate the feed hand wheel to extend the feed spindle.
4. Make the machine tightening mechanism into the tube, the cutter head and pipe surface should be left enough feed space.
5. Rotate the hand wheel and adjust the machine position to ensure that the machine feeds the spindle coaxial with the center of the tube. Tighten the nut on the hand wheel with a wrench.
6. Start the motor, rotate the feed handwheel, the blade is in contact with the pipe wall, and groove.
7. After finishing the machining, first exit the tool, then release the tightening mechanism, remove the machine from the tube.
S Series Inner Mounted Pipe Beveling Machine
Model:T18
Working range: Pipe ID 6-18inch
Wall thinckness: 6-20mm
Driveing Type: Pneumatic,Electric,Numerical,Hydraulic.
Product Show
Production Description
This series is Welding Preparation Portable Electric Pipe Beveling Machine with the following advantages:
- Lighter weight,minimal radial space.
- self-located in the center of the pipe, Easy to operate.
- Beveling and grooving with high speed ,used for the welding preparation.
- Driveing Type: Pneumatic,Electric,Numerical,Hydraulic.
- Application:petroleum,chemical,natural gas,food,boiler,medicine,power supply construction and nuclear power.
- Can Be Process Diffferent Material Pipe:Carbon Steel,Stainless Steel,Alloy And Ohers.
- Angle:Beveling angle as per your required.
| Capacity | Working range (mm) | ID | Wall thickness (mm) | |
| mm | inch | |||
| T1 | 12.5-28 | 14-18.5 | 1-1.3 | 1-3 |
| T3 | 25.4-79 | 31-89 | 1-3 | 1-15 |
| T6 | 60-170 | 66-180 | 2-6 | 3-20 |
| T8 | 88-219 | 95-225 | 3-8 | 4-20 |
| T12 | 114-300 | 133-325 | 5-12 | 5-20 |
| T18 | 168-457 | 180-465 | 6-18 | 6-20 |
| T24 | 254-600 | 273-630 | 10-24 | 6-20 |
| T32 | 335-780 | 377-830 | 14-32 | 6-25 |
Before you place order to us, please let us know the following information:
- Choose the right Model
- Confirm your electric power supply ( Voltage, frequency and phase)
- Confirm the beveling angel required
- Confirm the welding joint required (U, V, Double V or Compound preparation)
- Advise your pipe material ( Carbon steel, stainless steel or others)
- Other special demands about machine
- The spare parts needed
- If the pipe wall thickness more than 30mm, inform us in advance (Important)
1. Measure the size of the pipe to be machined, select the swelling block according to the swelling block diagram, install it on the wedge block, tighten the bolt, make sure it is secure and loose.
2. According to the processing requirements, select the tool table in the appropriate angle of the tool, installed in the machine cutter, tighten the bolt, fixed tool.
3. Rotate the feed hand wheel to extend the feed spindle.
4. Make the machine tightening mechanism into the tube, the cutter head and pipe surface should be left enough feed space.
5. Rotate the hand wheel and adjust the machine position to ensure that the machine feeds the spindle coaxial with the center of the tube. Tighten the nut on the hand wheel with a wrench.
6. Start the motor, rotate the feed handwheel, the blade is in contact with the pipe wall, and groove.
7. After finishing the machining, first exit the tool, then release the tightening mechanism, remove the machine from the tube.
You Might Also Like
FDA Approved Lemborexant Sleep-Wake Disorders and Insomnia D......
Dmr Digital Two-Way Radio, UHF/VHF, Compatible with Mototrbo......
Multifunctional Shr Opt/RF Hair Removel Elight Birth Mark Re......
Air Lift D2300 2300lbs Rubber Air Spring Bag for Car Truck A......
Hot Feed Rubber Extruder with Ce
Single Girder Gantry Crane with Factory Price
D2w6y Cheap Manual Home Used ABS Crank Hospital Foldaway Bed
Old Style Wooden Treasure Box with Brass Latch Woodcraft
Arena PARA Gatos for Toilet Bentonite Cat Sand Pet Supply
Women A Line Short Knee Length Tutu Tulle Prom Party Skirt
G Single Screw Progressive Cavity Pump Self-Priming Slurry P......
700ml Round Shape Spirits Vodka Whisky Brandy Glass Bottle