Powder Spray Coating Booth

China Powder Spray Coating Booth, Find details about China Powder Coating Booth, Powder Spray Booth from Powder Spray Coating Booth

Model NO.
COLO-3145
Trademark
COLO
Transport Package
as Export Standard
Specification
Tunnel powder booth
Origin
China
Model NO.
COLO-3145
Trademark
COLO
Transport Package
as Export Standard
Specification
Tunnel powder booth
Origin
China
Industrial Automatic Powder Spray Booth 
Brief Introduction
COLO-3145 is designed for pass through type powder coating.Parts enter the booth through the conveyor system openings,then pass the coating operator stations to receives the coating.Booth are work with Automatic reciprocator for doing automatic powder coating jobs.

The powder overspray is entrained within the air stream moving to the collector module,where the cartridge filters will remove the particulate.The containment air is drawn throught the air handler's primary and final filter system before being discharged back into the room.Coated parts exit the booth for conveyance to the cure onen.

Powder Spray Coating Booth
Booth Work with Reciprocators

1. Parts are pass thru the spray booth,hang on the conveyor system
2. Single side two gates open,one gate is for manual coating,one ine for reciprocator to doing coating
3. filter cartidges ,polyester material,detachable
4.Booth material adopt good quality galvanized steel ,SPCC
5.Durable ,moveable 

Specifications
ModelCOLO-S-3145
Booth TypeDrive-through
Inner size1400*1800*1000(W*H*D)
Certificate CE
Power supplyElectric
Application Powder coating recycle
Voltage380V/220V
Frequency50-60Hz
FiltersPolyester
Filters count4
Filters hang typeeasy for change
Filter cleaning systemPneumatic
Warranty12 months

Working with Reciprocator

Powder Spray Coating Booth


Powder Spray Coating Booth
Technical Parameters
Construction: The booth walls and roof are made of galvanized steel.The booth utilizes a single panel design. 
Lighting: The spray enclosure includes roof-mounted light fixtures,These fixtures are mounted on special panels that include factory-provided reinforcement. 
Exhaust system: The booth uses either one or two floor mounted exhaust units. The exhaust unit is constructed of primarily galvanized steel. 

Control Panel: The booth is operated via PLC control panel. The control panel allows the operator to stop and start the exhaust fan and turn the lights on and off. 


Delivery
We deliver a complete set of powder spray booth,the fan motor and filters will be disassemble to avoice they might damage during transport,but do not worry,they are easy and simple to assembl.
Lead time:2weeks

If you are intested in our producs,please feel free to contact us for further infomation
Powder Spray Coating Booth