Impulse Hydro Turbine for Hydro Power Plant
China Impulse Hydro Turbine for Hydro Power Plant, Find details about China Inclined Jet Turbine, Hydro Turbine from Impulse Hydro Turbine for Hydro Power Plant
Basic Info.
Model NO.
Various
Standard
Standard
Head
50 to 170m
Range of Supply
Turbine-Generator Set and Parts
Maintenance
Available Upon Request
Commissioning
Available Upon Request
Period of Warranty
3 Years
Trademark
Runh
Transport Package
in Bulk
Origin
Shandong Province
Model NO.
Various
Standard
Standard
Head
50 to 170m
Range of Supply
Turbine-Generator Set and Parts
Maintenance
Available Upon Request
Commissioning
Available Upon Request
Period of Warranty
3 Years
Trademark
Runh
Transport Package
in Bulk
Origin
Shandong Province
Product Desciption
Francis Turbine, as the most commonly used turbine in hydro power generation, has following technical features, compared with other models of hydro turbine.
1. The optimal model for low flow-head ratio: impulse hydro turbine is the optimal choice for power plant taking advantage of small water flow from high elevation.
2. Wide average efficiency: impulse hydro turbine has high efficiency on average. e.g Pelton turbine is able to perform with average efficiency of 91% in the load range of 30 to 110%.
3. Minimal requirement of civil work: in many case where impulse hydro turbine is used to generate power from water falling from high head, no dam or draft pipe on downstream is required, causing minimal negative environmental impact.
Scope of supply of Runh Power: Hydro-turbine and generator unit.
Technical parameters of Impulse turbine provided by Runh Power:
1.Head: 260 to 725 meters (turbine with head higher than 725 meters can be customize-made)
2.Flow: no more than 2.03 m3/s
3.Capacity of generator : 20 to 6700 KV
4.Output of the unit :18.0 to 6300 KW
Following is a table of parameter of part of Runh Power's Francis turbine:
(Complete catalog of inclined jet turbine is available upon your request.)
Runh Power's focus of business in the EPC service of power plant. For commissioning Runh Power a project of power plant, following documents are required for the approval of investment made to foreign countries. With at least PPA and Feasibility Report in place, Runh Power is able to help the commissioner to secure private investment or loan from various Chiness national bank.
-1) Power Purchase Agreement (For independent power producers only)
-2) Feasibility report (In case that there is none, designers and engineers can be dispatched to compile one at the expense of commissioner.)
-3) Sovereign bonds (If sovereign bonds are acquired and the commissioner has 15 % of capital need for the project, Runh Power could start the project while engaging China Export & Credit Insurance Corporation)
-4) Construction Permit (optional)
-5) Fire permit (optional)
-6) Environmental impact assessment (optional)
-7) Land Lease (optional)
-8) Power Generation Power (optional)
-9) Other documents deemed helpful (optional)
Runh Power is dedicated to provide package service covering from end to end of a construction project of power plant.Services included in an EPC project unfolds in the following order, which also constitutes Runh Power's scope of service.
1.The Argumentation of Project
a. Verification of documents submitted
b. Audition of documents by the authority
c. Signing the contract
2. Engineering Design
a. Selection of a complete set of equipment according to the request or Runh Power's recommandation or the request from the commissioner.
b. Design of overall layout and all the sub-systems within the parameter of power plant.
c. Selection of personnel participating in the project
d. Submission of technical solution to the commissioner for review and approval.
3.Equipment Purchase& Transportation
a.Turbo Generator Set and its auxiliary systems (boiler, condensing water collector, deaerator, high pressure and low pressure superheaters, power distribution system. etc )
b. All the construction material, tools, spare parts and other necessities of the project
4. Civil Construction
a. All the civil construction work within the parameter of power plant
5. Operation & Maintenance
a. Operation of power plant (technical counseling) (Optional)
b.Regular maintenance and inspection (Optional)
c.Technical Training Program for Power Plant Personnel (Optional)
d.General Overhaul (Optional)
6. Installation & Testing
a.Installation & testing for all systems & equipment provided by Runh Power
b.Installation, testing & trail run of all systems of a power plant (Optional)
c.Installation, testing & trail run of entire power plant (Optional)
7. Supply of Spare Parts
a. Long-term supply of spare parts and other consumibles.(Optional)
Copy and paste superlinks below to your browser to view more products&services of Runh Power:
Integraed Turbine Island: http://runhpower.en.made-in-china.com/product/hbJmEuBKJdfU/China-Integrated-Turbine-Island.html
Condensing Steam Turbine: http://runhpower.en.made-in-china.com/product/tbEmABSCZwaZ/China-Condensing-Steam-Turbine-of-Runh-Power.html
Condensing & Extracting Steam Turbine: http://runhpower.en.made-in-china.com/product/GqxJRuXYTZAE/China-Condensing-Extracting-Steam-Turbine-of-Runh-Power.html
Complete catalog of Runh Power's service and products: http://runhpower.en.made-in-china.com/product/DXOEPrMAqpUn/China-The-Catalog-of-Runh-Power-s-Service-Power-Plant-EPC-Contractor.html
1. The optimal model for low flow-head ratio: impulse hydro turbine is the optimal choice for power plant taking advantage of small water flow from high elevation.
2. Wide average efficiency: impulse hydro turbine has high efficiency on average. e.g Pelton turbine is able to perform with average efficiency of 91% in the load range of 30 to 110%.
3. Minimal requirement of civil work: in many case where impulse hydro turbine is used to generate power from water falling from high head, no dam or draft pipe on downstream is required, causing minimal negative environmental impact.
Scope of supply of Runh Power: Hydro-turbine and generator unit.
Technical parameters of Impulse turbine provided by Runh Power:
1.Head: 260 to 725 meters (turbine with head higher than 725 meters can be customize-made)
2.Flow: no more than 2.03 m3/s
3.Capacity of generator : 20 to 6700 KV
4.Output of the unit :18.0 to 6300 KW
Following is a table of parameter of part of Runh Power's Francis turbine:
(Complete catalog of inclined jet turbine is available upon your request.)
| model | turbine | generator | output of the unit (KW) | governor | valve | ||||
| head (m) | Flow (m3/s) | Output (kv) | speed (r/min) | model | capacity (kW) | ||||
| CJA237/475-W-70/1X4.5 | 260 | 0.108 | 266 | 1000 | SFW200-6/650 | 200 | 210.8 | CJWT-BWT-3000 | Φ300 |
| 295 | 0.115 | 280 | SFW250-6/740 | 250 | 261.8 | ||||
| 345 | 0.125 | 352 | SFW320-6/740 | 320 | 330.8 | ||||
| 400 | 0.135 | 433 | SFW400-6/740 | 400 | 407.0 | ||||
| 450 | 0.143 | 503 | SFW500-8/850 | 500 | 473.4 | ||||
| CJA237/475-W-70/1X5.5 | 260 | 0.165 | 348 | 1000 | SFW320-6/740 | 320 | 326.4 | CJWT-1-BWT-3000 | Φ300 |
| 280 | 0.171 | 413 | SFW400-6/850 | 400 | 388.2 | ||||
| 300 | 0.177 | 435 | SFW400-6/850 | 400 | 408.8 | ||||
| 320 | 0.183 | 479 | SFW400-6/850 | 400 | 450.3 | ||||
| 340 | 0.188 | 501 | SFW500-6/850 | 500 | 472.4 | ||||
| 350 | 0.191 | 520 | SFW500-6/850 | 500 | 490.4 | ||||
| 380 | 0.200 | 543 | SFW500-6/850 | 500 | 512.1 | ||||
| 421 | 0.207 | 611 | SFW630-6/990 | 500 | 576.2 | ||||
| 430 | 0.212 | 685 | SFW630-6/990 | 630 | 647.3 | ||||
| 70.3 | 0.82 | 721 | SFW500-6/990 | 630 | 681.3 | ||||
| CJA237/475-W-70/1X7 | 140 | 0.194 | 223.8 | 600 | SFW200-10/850 | 200 | 206.8 | CJWT-1-BWT-3000, manual | Φ300 |
| 160 | 0.207 | 277.8 | 750 | SFW250-8/740 | 250 | 258.4 | |||
| 180 | 0.220 | 332.1 | SFW320-8/850 | 320 | 310.5 | ||||
| 200 | 0.232 | 383.2 | SFW320-8/850 | 320 | 358.3 | ||||
| 220 | 0.243 | 440.5 | SFW400-8/850 | 400 | 414.1 | ||||
| 240 | 0.254 | 502.0 | SFW500-8/850 | 500 | 474.4 | ||||
| 260 | 0.264 | 572.0 | 1000 | SFW500-6/850 | 500 | 540.5 | |||
| 280 | 0.274 | 643.5 | SFW630-6/990 | 630 | 608.1 | ||||
| 300 | 0.284 | 714.6 | SFW630-6/990 | 630 | 675.3 | ||||
Runh Power's focus of business in the EPC service of power plant. For commissioning Runh Power a project of power plant, following documents are required for the approval of investment made to foreign countries. With at least PPA and Feasibility Report in place, Runh Power is able to help the commissioner to secure private investment or loan from various Chiness national bank.
-1) Power Purchase Agreement (For independent power producers only)
-2) Feasibility report (In case that there is none, designers and engineers can be dispatched to compile one at the expense of commissioner.)
-3) Sovereign bonds (If sovereign bonds are acquired and the commissioner has 15 % of capital need for the project, Runh Power could start the project while engaging China Export & Credit Insurance Corporation)
-4) Construction Permit (optional)
-5) Fire permit (optional)
-6) Environmental impact assessment (optional)
-7) Land Lease (optional)
-8) Power Generation Power (optional)
-9) Other documents deemed helpful (optional)
Runh Power is dedicated to provide package service covering from end to end of a construction project of power plant.Services included in an EPC project unfolds in the following order, which also constitutes Runh Power's scope of service.
1.The Argumentation of Project
a. Verification of documents submitted
b. Audition of documents by the authority
c. Signing the contract
2. Engineering Design
a. Selection of a complete set of equipment according to the request or Runh Power's recommandation or the request from the commissioner.
b. Design of overall layout and all the sub-systems within the parameter of power plant.
c. Selection of personnel participating in the project
d. Submission of technical solution to the commissioner for review and approval.
3.Equipment Purchase& Transportation
a.Turbo Generator Set and its auxiliary systems (boiler, condensing water collector, deaerator, high pressure and low pressure superheaters, power distribution system. etc )
b. All the construction material, tools, spare parts and other necessities of the project
4. Civil Construction
a. All the civil construction work within the parameter of power plant
5. Operation & Maintenance
a. Operation of power plant (technical counseling) (Optional)
b.Regular maintenance and inspection (Optional)
c.Technical Training Program for Power Plant Personnel (Optional)
d.General Overhaul (Optional)
6. Installation & Testing
a.Installation & testing for all systems & equipment provided by Runh Power
b.Installation, testing & trail run of all systems of a power plant (Optional)
c.Installation, testing & trail run of entire power plant (Optional)
7. Supply of Spare Parts
a. Long-term supply of spare parts and other consumibles.(Optional)
Copy and paste superlinks below to your browser to view more products&services of Runh Power:
Integraed Turbine Island: http://runhpower.en.made-in-china.com/product/hbJmEuBKJdfU/China-Integrated-Turbine-Island.html
Condensing Steam Turbine: http://runhpower.en.made-in-china.com/product/tbEmABSCZwaZ/China-Condensing-Steam-Turbine-of-Runh-Power.html
Condensing & Extracting Steam Turbine: http://runhpower.en.made-in-china.com/product/GqxJRuXYTZAE/China-Condensing-Extracting-Steam-Turbine-of-Runh-Power.html
Complete catalog of Runh Power's service and products: http://runhpower.en.made-in-china.com/product/DXOEPrMAqpUn/China-The-Catalog-of-Runh-Power-s-Service-Power-Plant-EPC-Contractor.html
You Might Also Like
Handwork Polyurea Protective Material Th -701
Gasoline Hand Held Concrete Finishing Machine Mini Power Tro......
10A An87330 Three Phase Power Analyzer
3.5" eSATA HDD External Enclosure
Food Grade 304 Stainless Steel Vacuum Flask Thermal Insulati......
CE-Approval! ! ! China DT638B Hades Down Type Dental Chair
Chinese Supplier 10dt Medium Copper Wire Drawing Equipment w......
Proximal Humeral Locking Plate, Small Fragment Plates, Titan......
Industrial Parts Usi Type Seal for Piston and Piston Rod
Long Life Miniature Micro Switch Used in Phone and Designs
N210106267AA Cover