Products

Engine Oil Boundary Pumping Temperature Tester

China Engine Oil Boundary Pumping Temperature Tester, Find details about China Boundary Pumping Temperature Tester, Engine Oil Boundary Pumping Temperature Tester from Engine Oil Boundary Pumping Temperature Tester

Model NO.
GD-H1152
Applicable Standards
ASTM D3829 D4684 GB/T 9171
Refrigeration Method
Imported Compressor Refrigeration
Working Temperature
80~-40°c
Temperature Control Method
Program Temperature Control
Heating Method
Heating Tube Heating
Detection Method
Photocell Detection
Control Method
Computer Automatic Control
Working Unit
5 Units
Power Supply
AC220V 50Hz
Warranty
1 Year
Trademark
GOLD
Transport Package
Standard Wooden Case
Specification
480mm*360mm*470mm
Origin
Chongqing, China (Mainland)
HS Code
9014209090
Model NO.
GD-H1152
Applicable Standards
ASTM D3829 D4684 GB/T 9171
Refrigeration Method
Imported Compressor Refrigeration
Working Temperature
80~-40°c
Temperature Control Method
Program Temperature Control
Heating Method
Heating Tube Heating
Detection Method
Photocell Detection
Control Method
Computer Automatic Control
Working Unit
5 Units
Power Supply
AC220V 50Hz
Warranty
1 Year
Trademark
GOLD
Transport Package
Standard Wooden Case
Specification
480mm*360mm*470mm
Origin
Chongqing, China (Mainland)
HS Code
9014209090


GD-H1152 Fully Automatic Engine Oil Boundary Pumping Temperature Tester


Introduction:
The instrument is used to determine the engine oil boundary pumping temperature, (low temperature) yield stress and apparent viscosity of the vehicle. The test temperature control range is wide, from -5 °C to -40 °C. The test process is all automatically controlled by a computer.


Technical Features:
1. Temperature range: temperature range -5 ° C to -40 ° C, temperature control accuracy ± 0.1 ° C;
2. Fully enclosed compressor refrigeration with large cooling capacity;
3. Monitor temperature, cycle and rotor motion by computer;
4. Improved pulley assembly, enhance the stability and sensitivity of the pulley, photoelectric sensor test;
5. 5 rotors can be detected at the same time, diversity;
6. The rotor has a transparent transparent plexiglass cover;
7. Microcomputer control, Windows operating system, full Chinese interface;
8. The program automatically performs temperature control on the nonlinear curve to determine the yield stress and apparent viscosity;
9. Cleaning temperature control and temperature calibration function;
10. The viscometer is constantly calibrated and stored;
11, the test results can be stored and printed;
12. Calculation and printing function of the air-resistance type and "flow restricted type" boundary pumping temperature;
13. Equipped with special low temperature thermostat equipment;
14. Equipped with the newly developed defrosting system


Technical Specifications:
 
1Applicable standards:ASTM D3829 D4684 GB/T 9171 (optional SH/T0562)
2Refrigeration method:imported compressor refrigeration
3Working temperature:80~-40°C
4Temperature control method:program temperature control
5Heating method:heating tube heating
6Detection method: Photocell detection
7Control method: computer automatic control
8Working unit: 5 units
9Power supply:AC220V 50HZ




 

You Might Also Like