China Panasonic Spg2 Screen Printer Nm-Ejp1b, Find details about China Spg2, Screen Printer from Panasonic Spg2 Screen Printer Nm-Ejp1b
Supporting high accuracy/density printing
Attack angle variable squeegee (option)
Top/side clamper (movable type) (option)
New operation panel
Enhancing automation and labor-saving functions
Paper-less cleaning (option)
Holed pot type automatic solder supply (option)
Support pin automatic exchange (option)
M2M Line solution
According to the correction data of shifted printing positions analyzed by solder paste inspection (APC correction data), it corrects printing positions(X ,Y ,θ).
*3D inspection equipment of other companies can also be connected.
*Please inquire with your sales representative for more details.
The set squeegee angle can be adjusted, using the front and rear squeegee vertical axes, between 45°and 70°.
Pressing down on PCB edge faces increases printing quality of warped PCB.
Either PCB upper or side face can be selected for correction.
1 A large-sized panel (15-inch) introduced to increase ease of use and visibility.
2 Screen configuration reviewed (a reduction in the number of screens) to decrease the screen handling time required.
Mask cleaning without cleaning paper or solvent, eliminating paper and solvent exchange operations.
Solder supply automated to promote labor saving and operation without interruption.
Automated collection/arrangement of support pins during changeover to save manpower.
According to the correction data of shifted printing positions analyzed by solder paste inspection (APC correction data), it corrects printing positions (X ,Y ,θ).
*3D inspection equipment of other companies can also be connected.
*Please inquire with your sales representative for more details.
By connecting with a host system (LNB,iLNB...) , the followings can be supported :
Model ID | SPG2 |
Model No. | NM-EJP1B |
PCB dimensions (mm) *1 | L 50 × W 50 to L 510 × W 510 |
PCB exchange time *2 | 14 sec including transfer, PCB positioning and recognition, printing and regular cleaning (when PCB is L250 × W150) |
Repeatability | 2Cpk ±4.0 μm 6σ (±3σ) (Under conditions specified by Panasonic) |
Printing accuracy | 2Cp ±15.0 μm 6σ (±3σ) (Under conditions specified by Panasonic) |
Screen frame dimensions (mm) *3 | L 736 × W 736,L 750 × W 750, L 650 × W 550,L 600 × W 550 L 550 × W 650,L 584 × W 584, L 736 × W 584,L 584 × W 736 |
Electric source *4 | 1-phase AC 200, 220, 230, 240 V ±10V (tap changing available) Max. 2.5 kVA |
Pneumatic source | 0.5 MPa, 30 L/min (A.N.R.) (Blower motor vacuum spec) , 400L/min (A.N.R.) (ejector vacuum spec) |
Dimensions (mm) *5 | W 1 580 × D 1 800 × H 1 500 |
Mass *6 | 1 600 kg |
*Values such as cycle time and accuracy may vary depending on operating conditions.
*Please refer to the "Specification booklet" for details.