Products

2.5g Tmux Conveter 2X1ge to 2.5g Supporting 2u Chassis (16 slots) and Standalone Use

China 2.5g Tmux Conveter 2X1ge to 2.5g Supporting 2u Chassis (16 slots) and Standalone Use, Find details about China Tmux Converter, Fiber Media Converter from 2.5g Tmux Conveter 2X1ge to 2.5g Supporting 2u Chassis (16 slots) and Standalone Use

Model NO.
FR-6000
Origin
China, Shenzhen
HS Code
8517622990
Model NO.
FR-6000
Origin
China, Shenzhen
HS Code
8517622990

2.5g Tmux Conveter 2X1ge to 2.5g Supporting 2u Chassis (16 slots) and Standalone Use2.5g Tmux Conveter 2X1ge to 2.5g Supporting 2u Chassis (16 slots) and Standalone Use2.5g Tmux Conveter 2X1ge to 2.5g Supporting 2u Chassis (16 slots) and Standalone Use

1.2×1GE to 2.5G
2.2.5Gbps trunk port rate
3.Hot swappable
4.In-Band management
5.Support loopback setting of the client side and the line side
6.Support cross mapping of the data of all port
7.SFP digital diagnostics monitoring
8.Supporting Hot Plug
9.Supporting Remote management
10.Easy installation with complete LED indicators for working situation
11.With powerful network management function, supporting WEB and SNMP
12.Supporting 2U chassis (16 slots) and standalone use
Description
2.5G TMUX Conveter Link status auto-detecting and redundant on Dual ports with the same connector type. Allows only the Primary Port or the Backup Port active at a time
-When the Primary Port link fail occurs, The traffic swaps the Backup Port automatically
-Once the Primary Port link regains, the traffic swaps from the Backup Port to the Primary Port hardware fiber port redundant.
More Details of 2.5G TMUX Conveter 
FR6000 Series is a Centralized Network Management Platform that provides 8 or 16 slots multi-service including Managed Media Converter Card, OEO Converter Card, 1+1 Protection Switching card, CWDM/DWDM MUX/DEMUX Card, etc. All interface cards, fans, management module Card and AC/DC redundant power supply are hot swappable, allowing online field replacement.
2.5g Tmux Conveter 2X1ge to 2.5g Supporting 2u Chassis (16 slots) and Standalone Use
Easy Installation
TELEFLY's 2.5G TMUX Conveter allows the backbone of the network to be flexible and easier to manage and maintain. Our converters are available in two form factors, chassis-based slide-in cards and stand-alone converters, allowing you the most flexibility for your network. Our converters also utilize both fixed optics and Small Form-Factor Pluggable (SFP) transceivers allowing you to customize each converter for the cable type you are using.

Management
Management access can be achieved locally or remote standalone via network by Web, SNMP, Telnet or Console. FR6000 series together with the MUX and DEMUX can offer a space-efficient and cost-effective solution for xWDM transmission. Complete system information can be set up and displayed, including the name of chassis, terrain and related information of IP, constant operating time and the versions of the hardware and software.
 
SNMP Management:
2.5g Tmux Conveter 2X1ge to 2.5g Supporting 2u Chassis (16 slots) and Standalone Use

Specifications

Physical Port
SFP Port100/1000BASE-X SFP × 2
SFP Port2500BASE-X SFP
Fiber Mode1000BASE-X/2500BASE-X, 550m-120km, LC/SC
Parameters
Ethernet StandardsIEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX/100BASE-FX
IEEE 802.3ab Gigabit Ethernet
IEEE 802.3z Gigabit Ethernet over Fiber Optic
IEEE 802.3x flow control and back pressure
IEEE 802.3ah terminal
TS-1000
Packet Length2046bytes
Transmission ModeStore and Forward/Cut through
Exchange PropertyDelay time: < 7ps   Backplane bandwidth: 20Gbps; Packet forwarding rate: 14.88Mpps
DIP SwitchesLFP function:Disable/Enable
Managed FeaturesSupports LFT (Link Fault Pass Through)
Supports Digital Diagnostic Monitor Interface (DDM) for SFP
Supports OAM/IP in-band management
Ingress/Egress Bandwidth control per port
Supports 16 IEEE 802.1Q Tag VLAN Group
SNMP alarm trap for power loss and port link down
Remote loop back test
Dying gasp (remote power failure detection)
LED IndicatorPower, FEF, FX-Link, TX-SPD, TX-Duplex, TX-Link, LFP
Power Information
Power InputDC 5V
Power ConsumptionFull-load<4W
Physical Property
Dimensions120mm×90mm×22mm
Installation Modewall-mountable
Weight100g
Working Environment
Operating Temperature0°C~50°C
Operating Humidity10%~90% non-condensing
Storage Temperature-10°C~70°C
Warranty
MTBF50,000 hours
Defects Liability Period1 year warranty, lifetime technical support
Certification Standard
EMCFCC Part15 Class A   CE-EMC/LVD   RoHS   EN61000-4-2 (ESD), EN61000-4-3 (RS)   EN6100044 (EFT), EN6100045 (Surge)   EN61000^1-6 (CS), EN61000-4-8   EN61000-4-11
    Company Profile
    TELEFLY Telecommunications Equipment Co., Ltd. is a leading Chinese manufacturer founded in 2004, certified by SGS. We provide high quality and price competitive fibre optic cable, fibre optic patch cords, fibre optic patch panels, FTTH equipments, fibre optique patch panels, optical splitters, WDM, optical attenuators, fast connectors ,Ethernet switch ,SFP transceiver and so on. Up till now, our products and solutions have been deployed in over 60 countries and regions, TELEFLY is looking forward to strengthening friendly cooperative relationships with all clients, creating benefits together and sharing the joy of success!
    2.5g Tmux Conveter 2X1ge to 2.5g Supporting 2u Chassis (16 slots) and Standalone Use

    Why you choose TELEFLY be one of your partner?
    1.Customer get satisfied quality and service with competitive price and punctual delivery.
    2.OEM service with 13-year experiences, free samples are available.
    3.Prompt answer for any question and inquiry in the shortest time.
    4.Factory directly,reduce your cost and save time.

    Cerfifications Showing
    2.5g Tmux Conveter 2X1ge to 2.5g Supporting 2u Chassis (16 slots) and Standalone Use
    Our Exhibition
    2.5g Tmux Conveter 2X1ge to 2.5g Supporting 2u Chassis (16 slots) and Standalone Use
    Professional packing and transportation
    2.5g Tmux Conveter 2X1ge to 2.5g Supporting 2u Chassis (16 slots) and Standalone Use

      You Might Also Like