Manufactory and Trading Combo The Machine Double Screw Conical Mixer
China Manufactory and Trading Combo The Machine Double Screw Conical Mixer, Find details about China Plow Mixer, Ribbon Mixer from Manufactory and Trading Combo The Machine Double Screw Conical Mixer
Basic Info.
Model NO.
PNA
Certification
CE, ISO
Application Area
Food
Layout Type
Verticle
Mixing Drum Shape
Conical
Additional Capabilities
Drying, Granulating, Coating
Operating type
Cycle Operating
Condition
New
Construction Material
Carbon Steel, SS304, SS316L
Capacity Range
200 - 3, 000 Liters
Ex-Proof Version
Available
Polishing
Dull Polishing; Mirror Polishing
Reducer
Local Brand, Sew, Nord
Bearing
Local Brand, SKF, FAG, NSK
Trademark
PERMIX
Transport Package
Wooden Crates
Specification
CE
Origin
China
HS Code
8474390000
Model NO.
PNA
Certification
CE, ISO
Application Area
Food
Layout Type
Verticle
Mixing Drum Shape
Conical
Additional Capabilities
Drying, Granulating, Coating
Operating type
Cycle Operating
Condition
New
Construction Material
Carbon Steel, SS304, SS316L
Capacity Range
200 - 3, 000 Liters
Ex-Proof Version
Available
Polishing
Dull Polishing; Mirror Polishing
Reducer
Local Brand, Sew, Nord
Bearing
Local Brand, SKF, FAG, NSK
Trademark
PERMIX
Transport Package
Wooden Crates
Specification
CE
Origin
China
HS Code
8474390000
Product Desciption
Manufactory and Trading Combo The Machine Double Screw Conical Mixer
BRIEF INTRODUCTION:The PerMix PNA series Conical Screw Mixer is a batch mixing equipment used widely in mixing applications that require gentle mixing with minimal product distortion, minimal heat generation, and very accurate mixing homogeneity. Since it was first developed more than 60 years ago, it has been recognized as a good solution for the products which is delicate, heat sensitive or tending to segregate.
Due to the reason the PerMix Conical Screw Mixer uses the gravity to generate the significant downward massflow, it saves energy compared with a horizontal mixer.
These Conical Screw Mixers are also featured with no contamination to the product during the mixing, due to the fact that the shaft sealing & bearing is above the working area, thus no contact with the product.
HOW IT WORKS:
Inside of the PerMix Conical Screw Mixer, there is a cantilevered rotating screw (or two, three screws according to specified application) rotating by its own axle which is in parallel to and near the wall of the cone vessel. The mixing screw lifts the product around it from bottom to the top, and then the powder falls down due to the gravity, causing a convective mixing.
At the same time, the screw is supported by an orbital arm and is rotating around the center of the cone like a planetary, so that the powders in every corner of the cone can be mixed by the screw, and a 3-dimentional mixing performance occurs within the whole cone.
OPTIONS:
- Feeding & Discharging
A variety of feeding & discharging methods available.
- Screw Type
We offer single screw, double screw and triple screw to give different mixing intensity.
- Drive system
Drive system by geared motor, cycloidal reducer, worm reducer, belt or chain transmission, etc.
- Construction Material and Finish
We are able to offer our PVR Mixers with contact part to be built in Carbon steel, SS304, SS316/316L, Titanium, Duplex stainless steel, Hastelloy, etc. Finish of internal and external finish can be dull polished, 180 grit polished (food grade), or mirror polished. For abrasive materials we offer hardened steel as the contact part.
- Spray nozzle
Liquid can be added into the powder by spray nozzles on the top.
- Heating/Cooling jacket
Jacketed trough for heating/cooling operation
- Vacuum drying & deaerating
PNA Conical Screw Mixers can be designed to a vacuum mixer dryer for vacuum drying & deaerating or for inner pressure working for special applications.
APPLICATIONS:
- Animal Care
Animal Feeds, Chicken Fattening Feed, Fish Foods, Mineral Feed, Pet Foods, Poultry Feed, Rabbit Feed, Veterinary Medicine
- Chemicals
Adhesives, Carbon Black, Dyestuff, Electrode Mass, Fly Ashes, Fungicides, Peat Moss Mixes, Pesticides, Pharmaceuticals, Pigments, Plastic Additives, Resins, Solid Lubricants
- Daily Care
Aromas, Cat Box Litter, Cleansers, Detergents, Potpourri
- Building Materials
Decorative Paste Coatings, Dry Mortar Mixes, Fibre Cement Cladding, Gypsum, Joint Compounds, Thermal Insulation Composit
| Model | Total volume (liter) | Working volume (liter) | Power (*) (kW) | RPM | Dia. (mm) | H, total height (**) (mm) | Inlet (***) (mm) | Outlet (****) (mm) | Weight (kg) |
| PNA-200 | 200 | 120 | 2.2+0.37 | 140/2 | 888 | 1557 | 140 | 230 | 500 |
| PNA-300 | 300 | 180 | 2.2+0.37 | 140/2 | 990 | 1722 | 180 | 230 | 550 |
| PNA-500 | 500 | 300 | 3+0.55 | 140/2 | 1156 | 1991 | 200 | 230 | 600 |
| PNA-800 | 800 | 480 | 4+0.55 | 60/2 | 1492 | 2256 | 250 | 300 | 950 |
| PNA-1000 | 1000 | 600 | 4+0.55 | 60/2 | 1600 | 2432 | 300 | 300 | 1200 |
| PNA-1500 | 1500 | 900 | 5.5+0.75 | 60/2 | 1780 | 2725 | 300 | 300 | 1350 |
| PNA-2000 | 2000 | 1200 | 5.5+0.75 | 60/2 | 1948 | 3001 | 350 | 350 | 1500 |
| PNA-2500 | 2500 | 1500 | 7.5+1.5 | 60/2 | 2062 | 3024 | 350 | 350 | 1800 |
| PNA-3000 | 3000 | 1800 | 7.5+1.5 | 60/2 | 2175 | 3207 | 350 | 350 | 2100 |
| PNA-4000 | 4000 | 2400 | 11+2.2 | 40/2 | 2435 | 4010 | 400 | 400 | 2500 |
| PNA-5000 | 5000 | 3000 | 15+2.2 | 40/2 | 2578 | 4260 | 400 | 400 | 3000 |
| PNA-6000 | 6000 | 3600 | 18.5+3 | 40/2 | 2715 | 4470 | 400 | 400 | 3500 |
| PNA-8000 | 8000 | 4800 | 22+3 | 40/1.3 | 2792 | 5000 | 400 | 450 | 3800 |
| PNA-10000 | 10000 | 6000 | 30+4 | 40/1.3 | 3000 | 5240 | 500 | 450 | 4300 |
2. Customized sizes available as per request
3. All specifications and illustrations are as accurate as is reasonably possible, but they are not binding.
4. PerMix reserves the right to modify the design without notice.
A: Depending on the machine type and size, our price level is 30%-60% less than the European suppliers and 5-15% higher than the big local suppliers.
Q: Are you able to provide tailor-made design and production for the mixers?
A: Yes, in fact more than half of our mixers are tailor made, which is one of our strong points.
Q: Are you able to design and produce other processing equipment?
A: We are open to discuss about it.
Q: Can you provide machines to OEM customers, meaning to label their brands on the machines.
A: Yes we are doing it a lot. We have several OEM partners in the USA.
Q: Do you have agent network out of China?
A: Yes we do have agents but only in some countries, for example in USA, Germany, Poland, Spain, Denmark, Turkey, Argentina, etc. We are still looking for more agents because we believe to work with agents is the best way to do business.
Q: What is your delivery lead time of the mixing equipment.
A: Depending on the size and level of customization, but usually it is from 6-14 weeks.
Q: How do you pack and ship the mixing machines?
A: For machines don't require full container loading, we will pack them in wooden case. For FCL (full container loading) shipment, we will just wrap the machines in plastic films and fix them in the container. The shipment can be either by air or by sea
You Might Also Like
Handwork Polyurea Protective Material Th -701
Gasoline Hand Held Concrete Finishing Machine Mini Power Tro......
10A An87330 Three Phase Power Analyzer
3.5" eSATA HDD External Enclosure
Food Grade 304 Stainless Steel Vacuum Flask Thermal Insulati......
CE-Approval! ! ! China DT638B Hades Down Type Dental Chair
Chinese Supplier 10dt Medium Copper Wire Drawing Equipment w......
Proximal Humeral Locking Plate, Small Fragment Plates, Titan......
Industrial Parts Usi Type Seal for Piston and Piston Rod
Long Life Miniature Micro Switch Used in Phone and Designs
N210106267AA Cover