Products

Oilfield Sludge Disposal Catalyze Drying Incineration Recycling Plant

China Oilfield Sludge Disposal Catalyze Drying Incineration Recycling Plant, Find details about China Oilfield Sludge Recycling Plant, Oilfield Sludge Drying Plant from Oilfield Sludge Disposal Catalyze Drying Incineration Recycling Plant

Model NO.
BJYN-50
Usage
Oil Recycling&Drying Sludge
Fuel Advantage
Use Recycling Fuel to Heat
Air Puritication System
Installed
End Discharge
Oil Content Under 0.3%
Electricity
380V
Labors
3-4
Land
200-1500m²
Reduction
to 10-15%
Emission
CO2, H2O
Environmental Advantages
Green and Saving Energy
End Discharge Usage
Construction Bricks
Trademark
Benji
Transport Package
Full Container
Specification
2.3x2.5
Origin
China
HS Code
8477800000
Model NO.
BJYN-50
Usage
Oil Recycling&Drying Sludge
Fuel Advantage
Use Recycling Fuel to Heat
Air Puritication System
Installed
End Discharge
Oil Content Under 0.3%
Electricity
380V
Labors
3-4
Land
200-1500m²
Reduction
to 10-15%
Emission
CO2, H2O
Environmental Advantages
Green and Saving Energy
End Discharge Usage
Construction Bricks
Trademark
Benji
Transport Package
Full Container
Specification
2.3x2.5
Origin
China
HS Code
8477800000
Oilfield Sludge Disposal Catalyze Drying Incineration Recycling Plant
1,Process Line
A:Hierarchical dehydrate with 50% moisture content
B: remove oil by pyrolysis
C:cooling and recycling
D:deslag burn again till oil content within 0.3%.
 2,Technology Advanced
No loose agent,no need fuel,no moisture in slag,no organic,no smell,no interruption in production.Harmless,stable,reduction,recycling and benefit.

Pyrolysis Process Introduction

(1)Conditioned Process.The water content of 80-95% oily sludge dehydrated by centrifuge was added into the conditioner, and the coating water in the oily sludge was broken to facilitate the precipitation of water.
(2)Concentration Process.Let oil sludge concentration separation.Waters go out from up and drier oil sludge goes into flocculation.
(3)Flocculation. Pre-sperate oily sludge from water.
(4)Muti-prefiltration.To obtain drier sludge after prefiltration.
(5)Multi-level transform ultrafiltration. Deeply dehydration to standard discharge. 
(6)Convey.40-60% oil content here.
If you want lower oil content rate,please continue below:
Second,Drying incineration system
(7)Drying
(8)incineration
The pyrolysis of organic matter in oily sludge burned by adding catalytic accelerant. In the preheating and drying materials, the injector is used to mix the catalytic accelerant with the oily sludge. Under the action of high temperature and catalytic accelerant, the oily sludge pyrolyzes and self-ablates, and finally the oily sludge becomes red brick color, completely devoid of water and organic matter, leaving only dry inorganic matter.

Third,Smog and dust purification system

1,Second burning of smog and dust.Burned in high temperature within 850-1000ºC,promise Carbon monoxide in standard after second burning and also decompose dioxin

2,Heat Exchange.
3,Denitration.
4,Desulfurization.
5,Ionize "Purification"

 

Slag Passivation and Recycling System

  • 1,Passivation. To make harmful heavy metal passivating in case of releasing hazard.
  • 2,Brick Production.Inorganic residue material can recycled to produce into bricks

You Might Also Like