Hospital Anesthesia Ventilator Machine

China Hospital Anesthesia Ventilator Machine, Find details about China Ventilator Machine, Portable Ventilator from Hospital Anesthesia Ventilator Machine

Weight
1.6 Kg
Specification
3 CTNS 48.5x32.5x21.5cm 90x52.8x21cm(Trolley)
Origin
Jiangsu, China
Weight
1.6 Kg
Specification
3 CTNS 48.5x32.5x21.5cm 90x52.8x21cm(Trolley)
Origin
Jiangsu, China
Hospital Anesthesia Ventilator Machine
       This option is desianed to give notice information including sound and message when users come with some problems. There are following notice options:High Pressure Reminder Sound: When the user upper airway pressure is over 3.5cmHz0 of the setting pressure, the PAP will beep with reminder message.Low MV Reminder Sound: The minute volume is lower than the setting value: the PAP will beep with reminder message. The range of the reminder value is 1 to 10lpm.Leak Reminder Sound: When this option is enabled. the PAP beeps with reminder message if the mask leaks too much air or if you remove the mask during the therapy.Outage Reminder Sound: When the power is stopped suddenly, the PAP will beep with reminder message.Asphyxiation Reminder Sound: When the time of user asphyxia is over the set value, the PAF will beep with reminder message. The range of the reminder value is 10 to 40 second.Low VT Reminder Sound: The tidal volume is lower than the settina value; the PAP will beep with reminder message. The range of the reminder value is 50 to 500ml.
1. Scope of application:
For adult patients with ARDS, hypoventilation syndrome, for bi-level non-invasive 
ventilation in a hospital or home.
2 . the main function:
1,Different treatment options can be provided according to patients' needs, from CPAP 
to S, T, S / T, VGPS five modes.
2. Adjustable trigger sensitivity.
3. Real-time monitoring and recording of blood oxygen saturation.
4. alarm function.
5. Record function (SD card).
6. Maximum leak compensation function. 60L/min
7. With trolley, easy to move in the hospital
3. the key technical parameters:
1. Working mode: CPAP, S, T, ST, VGPS.
2. Ventilation parameters:
2.1 Inspiratory pressure: 4-30 cmH2O (0.5 cmH2O interval)
2.2 Expiratory pressure: 4-30 cmH2O (0.5 cmH2O interval)
2.3 Treatment pressure: 4-20 cmH2O (in CPAP mode, 0.5 cmH2O interval)
2.4 Delayed boost: 0-45 minutes (interval of 5 minutes)
2.5 Breathing frequency: 5-50 times / minute (interval 1 time / minute)
2.6 Breathing ratio: 10-70% (interval of 1%)
2.7 Rise time: 1-5 steps (1 step interval, 1 step rises fastest, 5 steps rises most slowly)
2.8 Inhalation sensitivity: 1-5 steps (1 step interval, 1st step triggers fastest, 5th step 1st 
step triggers slowest)
2.9 Exhalation sensitivity: 1-5 (1 interval, the 1st trigger is the fastest, 5th and 1st the 
slowest)
2.10 Tidal volume: 50-1500ml (effective in VGPS mode, interval 50ml),
3.VGPS(same with AVAPS,can set Target tidal volume)mode:
3.1 Maximum IPAP value adjustable range: 4-30 cmH2O
3.2 Adjustable range of minimum IPAP value: 4-30 cmH2O
3.3 EPAP value adjustable range: 4-30 cmH2O
3.4 Target Tidal Volume: 50-1500ml
4. Display range of monitoring setting parameters:
4.1 Respiratory waveform can be displayed;
4.2 Current mode: CPAP, S, T, ST, VGPS
4.3 Inspiratory pressure: 4-30 cmH2O
4.4 Expiratory pressure: 4-30 cmH2O
4.5 Breathing frequency: 5-50 times / minute
4.6 Breathing ratio: 10-70%
4.7 Air leakage: 20-99.9lpm
4.8 Tidal volume: 50-1500ml
4.9 minute ventilation: 0-50lpm
4.10 Blood oxygen saturation: 70-100%
4.11 Pulse rate: 30-250bpm
4.12 Delay boost: 0-45 minutes
5. Alarm items:
5.1 High pressure sound prompt: Turn on / off sound prompt
5.2 Low minute ventilation sound prompt: Turn on / off sound prompt, can be set to 
1-10L (interval 1L)
5.3 Air leakage sound prompt: on / off
5.4 Power off sound prompt: on / off
5.5 Choking voice prompt: On / off, choking time can be set to 10-40 seconds (interval 
of 5 seconds)
5.6 Low Tidal Volume Sound Prompt: On / Off, Set Tidal Volume Value Range 50-500ml 
((Interval 50ml))
6.Specifications
6.1 Weight: about 20kg including the trolley and the device
6.2 Operating temperature: 5-35 ° C
6.3 Relative humidity: 10% -90%
6.4 Power supply: input is AC 100-240V, 50-60Hz, 1.8A Max; output: DC 24V, 3.33A.Hospital Anesthesia Ventilator Machine

Hospital Anesthesia Ventilator Machine
Hospital Anesthesia Ventilator Machine
Hospital Anesthesia Ventilator Machine
Hospital Anesthesia Ventilator Machine   
Hospital Anesthesia Ventilator Machine
Hospital Anesthesia Ventilator Machine