Carbon Dioxide Resistance Polyurethane Seal PU Seal For Paintball Gun

We are manufacture and trading combo since 2006, we supply o-rings made by different materials/compound, such as NBR, FKM, EPDM, SIL and so on. Of course, the o-rings also can be made by different colors as you like.

But what is an o-ring? A lot of people misunderstand this, I can show you a draft drawing to understand this.

We can see on the drawing, the cross section looks like an "O", so we call it o-ring. 
On the drawing, "OD" means outer diameter, "ID" means inner diameter, "CS" means cross section. There is a formula as bellow:
OD = ID + 2×CS, and we usually show an o-rings as ID*CS.

Products Show:

Item name:  Polyurethane Seal PU Seal For Paintball Gun,           Material: Polyurethane PU

Why choose us? I can show you our ADVANTAGES as bellow:

1,  Wide range of dimensions:

    a) Standard, including AS 568, BS 1806, French, JIS B 2401-P / G / V / S series

    b) Nonstandard, we also have thousands of molds besides standard sizes.

    Total o ring molds, more than 4000. ID(0.5mm~1500mm), CS(0.3mm~23mm)

2,  Wide range of colors:

    Black, white, blue, yellow, red, green, we can also adjust colors by color number (Pantone).

3,  Wide range of materials:

    NBR(Nitrile Rubber/Buna-N), SIL(Silicone Rubber), EPDM(Ethylene propylene Rubber),

    Fluoroelastomer (FKM/FPM), HNBR (Hydrogenate Nitrile), CR/Neoprene/Polychloroprene,

    SBR(Styrene Butadiene Copolyme),  IIR(Butyl Rubber),  PU (polyurethane rubber),

    FLS (Fluorinated Silicone Rubber), FFPM(FFKM).

4,  All kinds of certificats:

    ISO9001, IATF16949, FDA, RoHs, Reach and so on.

Of course, if you don't need o-rings, then you can check our


Description of Materials:

We can make rubber products by different materials, we choose material according to the operating environment.
  

Process Flow:

Raw material test → Prescribe → Mixing Material → Cutting Material → First Cure → First Part Inspection → Casual Inspection
→ Burr Dealing → Eye Inspection → IPQC → Washing or Grinding → Post Cure → FQC → Packing

Packing & Delivery:

Packing: PE bag inside, Carton outside.
Carton size: 46cm*34cm*34cm,40cm*34cn*34cm 51cm*34cm*34cm, 30cm*23cm*20cm
Delivery: Large quantity by ship, small quantity by air or express.

FAQ:

1,Are you manufacture or trading company ?
We are manufacture and trading combo. we have two factories,
One located in Shangrao City, Jiangxi Province, one in Dongguan City, Guangdong Province.

2,Can I get samples from you ?
Of course, you can. If the samples you need we have in stock, you can get them for free,
only need to pay for the express cost.

3,What's the term of payment ?
Amount < US$2000,   100% paid in advance by T/T;
Amount >= US$2000,  40% T/T as deposit in advance, 60% T/T as balance before shipment. 

4,Can you produce OEM products ?
Yes, we can produce products by your drawings or samples.

5,What's your MOQ ?
If we have the products in stock , the quantity by your requirement, If we don't have them in stock.
NBR, SIL, SBR, EPDM, NR: 100 US$;  PU, HNBR, FKM: 150 US$