32mm Kenter Shackle Use for Stud Link Anchor Chain

China 32mm Kenter Shackle Use for Stud Link Anchor Chain, Find details about China Marine Kenter Shackle, CCS Kenter Shackle from 32mm Kenter Shackle Use for Stud Link Anchor Chain

Basic Info.

Model NO.

Kenter Shackle

Grade

U1-U3

Test Load

Proof Load and Break Load

Function

for Ships and Marine Building

Certificate

ABS, Lr, BV, Nk, Dnv, Rina, RS, Irs, CCS

Trademark

DEYUAN MARINE

Transport Package

by Sea or Express

Specification

Dia 14mm-120mm

Origin

China

Model NO.

Kenter Shackle

Grade

U1-U3

Test Load

Proof Load and Break Load

Function

for Ships and Marine Building

Certificate

ABS, Lr, BV, Nk, Dnv, Rina, RS, Irs, CCS

Trademark

DEYUAN MARINE

Transport Package

by Sea or Express

Specification

Dia 14mm-120mm

Origin

China

Product Desciption

32mm Kenter Shackle Use For Stud Link Anchor Chain

Marine Kenter Joining shackle

The Kenter joining shackle is used to connect two separate lengths of chains. The shackle consists of two separate halves that are securely joined together with a centre chock and taper pin. Remove the taper pin to 'unlock' the shackle and connect your chains.

The Kenter shacklecontains three parts plus taper pin and lead plug. The two main halves have numbers to be matched and arrows to be lined upfor ease of assembly with the third piece (stud). The two main parts are attached to the ends of the chainin a vertical position and then fitted together , and the stud is then slid into place , which locksthe link. The stud is secured by hammering a taperedpin into the hole drilled diagonally through allthree parts of the joining link. This hole is tapered, and when the pin is driven home, a small conical recess (called the "dovetail chamber") is left clearabove its head. A lead pellet is hammered broad end first into this chamber, so as to fill it completely and thereby keep the pin in place.

Precaution must be used to prevent flat, small pieces of lead from flying off the joining link into the face or eyes. Prior to assembly, the internal mating surfaces should be coated with a molybdenum disulphide grease (MIL-G-23549) or an equivalent lithium based grease. When assembling and before inserting the new lead, any remaining lead must be reamed out. When dissembling, the locking pin is driven out with a "drift". To part the link, a top swage (shaped to the curvature of the link) must always be used between the hammer and link so as to avoid damaging the machined surfaces.

32mm Kenter Shackle Use for Stud Link Anchor Chain