Products

4 Wired 12V&24V Conventional Fire Alarm Smoke Sensor with Relay Output

China 4 Wired 12V&24V Conventional Fire Alarm Smoke Sensor with Relay Output, Find details about China Smoke Detector, Fire Alarm from 4 Wired 12V&24V Conventional Fire Alarm Smoke Sensor with Relay Output

Model NO.
CA2001L
Product Type
Smoke Detector with Relay Output
Sound Pressure Level
Above 65dB
Appliction
Security System,Industrial Control Equipment
Transport Package
Carton
Specification
D105mm, H50mm
Origin
China
HS Code
8531901000
Model NO.
CA2001L
Product Type
Smoke Detector with Relay Output
Sound Pressure Level
Above 65dB
Appliction
Security System,Industrial Control Equipment
Transport Package
Carton
Specification
D105mm, H50mm
Origin
China
HS Code
8531901000
4 Wired 12V&24V Conventional Fire Alarm Smoke Sensor with Relay Output



Introduction

4-Wire smoke alarm with relay output is common used for industrial control equipment, power cubicle, charging pile, alarm bell etc fire warning system. This smoke alarm has the characteristics of high sensitivity, stability and reliability, small power consumption and durability. Easy to install.


Parameters
 
Product Namesmoke detector with relay outputRated operational voltageDC12~24V
Sound pressure level≥65dbStatic current≤300uA
Alarm current≤90MaWork temperature-10°C~+50°C
OutputSound&light alarm, relay outputHumidity≤95%.
Product standard GB4715-2005DimensionΦ105mm,H50mm


Functions

1. Detection. 
Press detection button, it can fully check the alarm functions. And the alarm light  flashes quickly with a rapid sound.
2. Alarm. 
In the normal environment, The alarm will flash automatically every 10S and              automatically detects the concentration of smoke in the surrounding environment at regular intervals(around 1.6s),If the smoke concentration is close to the alarm value, the alarm starts to perform intelligent calculation, and the alarm indicator light starts to flash. If the calculation result reaches or exceeds the alarm value, the alarm will start the sound-light alarm and start the relay. When the ambient smoke concentration drops below the alarm value, the alarm will automatically return to the normal working state.
3. Output.
Passive contact output. Contact capacity 24V/1A, NC or NO two kinds of output.


Installation

First drill two mounting holes with a diameter of 5mm on the ceiling 43~ 62.5mm apart. Fix the alarm base with the plug and screw. Then connect the power line and output line.install the alarm to the base in the correct direction. Press down and tighten clockwise, finally turn on the power, it works.


Product range

Addressable fire alarm system
Wireless alarm system
Electrical fire monitor system
Extinguishing control system
Fire door monitor system
Standalone smoke detectors and combustible gas detector
4-wire smoke detectors with relay output.


Service

1. OEM &ODM service.
2. Provide technical support and after-sale service.
3. 1 year warranty.
4. Normally 15 working days lead time.
5. Welcome sample order.


4 Wired 12V&24V Conventional Fire Alarm Smoke Sensor with Relay Output4 Wired 12V&24V Conventional Fire Alarm Smoke Sensor with Relay Output4 Wired 12V&24V Conventional Fire Alarm Smoke Sensor with Relay Output4 Wired 12V&24V Conventional Fire Alarm Smoke Sensor with Relay Output

You Might Also Like