65mm Straight thread bar cutting machine hydraulic rabar cutter

Advantages:
1, small size, light weight, compact structure, strong and reliable.

2, good lubrication performance: the use of box-type closed structure, gear splash lubrication, oil in turn for more than a month of continuous operation. (The oil level should not be lower than the oil mark, so that the machine is always in a good lubrication state).



 

Bar Diametre:6-40/6-42/6-45/6-50/6-55/6-60mm(Tensile strength≤450MPa)
Flat steel Max:70×15/80×18mm
Square steel max:(Q235-A)32×32/40×40mm
L-steel max :50×50/63×63mm
Cut/Min:32/min
Motor power:2.2/3/4/5.5KW
Motor speed:2840r/min
Unit weight:400kg/420kg/485kg/640kg/700kg/760kg
Pieces/cut  is based on 20mm Bar diameter.

Note:GQ40 can cut the bar below 32mm