Products

Automatic Dates Seeds Removing Machine

China Automatic Dates Seeds Removing Machine, Find details about China Dates Seeds Removing Machine, Pitting Machine for Cherries from Automatic Dates Seeds Removing Machine

Capacity
150-250kg/H
Size
1300*1300*1450mm
Weight
450kg
Mold
Depend on Date Diameter Customized
Origin
Henan
Capacity
150-250kg/H
Size
1300*1300*1450mm
Weight
450kg
Mold
Depend on Date Diameter Customized
Origin
Henan
date pitting machine from Elva
Automatic dates seeds removing machine
Automatic Dates Seeds Removing Machine
The machine can process jujube,dates, cherries, olives, etc., the output is 150-250kg/h, the machine is simple and convenient to operate, and the output is high. The mold can be customized according to the customer's raw material diameter. The machine is divided into carbon steel and 304 stainless steel.
Automatic Dates Seeds Removing Machine

Parameter:

modelpowercapacitysizeweightdiameter
TZ-11.5kw150-250kg/h1300*1300*1450mm450kg14-16mm
TZ-11.5kw150-250kg/h1300*1300*1450mm450kg16-18mm
TZ-11.5kw150-250kg/h1300*1300*1450mm450kg18-20mm
TZ-11.5kw150-250kg/h1300*1300*1450mm450kg20-22mm
TZ-11.5kw150-250kg/h1300*1300*1450mm450kg22-24mm
TZ-11.5kw150-250kg/h1300*1300*1450mm450kg24-26mm
TZ-11.5kw150-250kg/h1300*1300*1450mm450kg26-28mm
Automatic Dates Seeds Removing MachineAutomatic Dates Seeds Removing MachineThis new equipment solves the problems of high manufacturing cost, low automation, low production efficiency and poor safety of the old jujube corer equipment. Since the intermittent rotation speed of the rotating disc requires a low speed and requires ground indexing, a sheave mechanism is selected. The coordinated design of the actuator is composed of a reduction gear, a transmission device, a stamping mechanism, and an intermittent motion mechanism. During feeding, the punching needle cannot be pressed to the rotating disk. Obviously, before the punching needle moves from top to bottom, the rotating disk makes an intermittent rotation. Therefore, the movement between the punching needle and the rotating disk is strictly in time sequence and spatial position. Coordination and cooperation requirements.
The design of the mechanism movement cycle diagram For the movement cycle diagram of the jujube corer, the main purpose is to determine the sequence and phase of the two executive components of the punching needle and the rotating disk, so as to facilitate the design of each executive component. The red date pitting machine works in a working cycle.
Automatic Dates Seeds Removing MachineAutomatic Dates Seeds Removing MachineAutomatic Dates Seeds Removing MachineAutomatic Dates Seeds Removing Machine

You Might Also Like