Products

Tealth Fg 1.6mm Bur Head for External Contra Angle

China Tealth Fg 1.6mm Bur Head for External Contra Angle, Find details about China Dental Handpiece, Low Speed Handpiece from Tealth Fg 1.6mm Bur Head for External Contra Angle

Model NO.
1024CH-018
Application
Adult, Child
Loading Way
Push Button
Head Diameter
Middle Head
Exhaust Way
Exhaust Outside
Number of Holes
Two Holes
Connection
Without Quick Connector
Rotating Speed
Low-Speed Handpiece
Noise
Less Than 70dB
Ratio
1:1
Bur Applicable
1.60mm
Trademark
TEALTH
Transport Package
Plastic Box
Specification
Aluminum, stainless steel
Origin
China
HS Code
90184100
Model NO.
1024CH-018
Application
Adult, Child
Loading Way
Push Button
Head Diameter
Middle Head
Exhaust Way
Exhaust Outside
Number of Holes
Two Holes
Connection
Without Quick Connector
Rotating Speed
Low-Speed Handpiece
Noise
Less Than 70dB
Ratio
1:1
Bur Applicable
1.60mm
Trademark
TEALTH
Transport Package
Plastic Box
Specification
Aluminum, stainless steel
Origin
China
HS Code
90184100
Tealth Fg 1.6mm Bur Head for External Contra Angle
Model: 1024CH-018
Name: FG bur Push button Head for External Irrigation Contra Angle

Features:
Match up with standard brands contra angle
Push button chuck type
Bur applicable: 1.60mm
Tealth Fg 1.6mm Bur Head for External Contra Angle
Tealth Fg 1.6mm Bur Head for External Contra Angle
Instruction:
After each treatment,Sterilizing handpiece in autoclave according to the following steps:
1.Remove the bur and brush clean handpiece, clean outside of handpiece with an alcohol solution.
2.Lubricate handpiece, each times drop two drops inside of air inlet pipe.
3.Place into autoclaving pouch and mark.
4.Autoclave the handpiece for 12 min. at 135ºC.

Operation Instruction:
It shall be sterilized before handpiece is used at the first time;sterilization temperature is 135ºC and last for 12 minutes.
After using,Please follow the instruction to sterilize the handpiece:
1 extract the bur from the handpiece,use the soft brush to clean the dirt and wash with disinfection of alcohol cotton.
2 lubricate the handpiece,pour two drops into air tube one time.
3 wrap it with sterilization package and mark.

Please do not use the acid solution to scrub, inject or soak the handpiece.
Please do not autoclave the handpiece with residual chemical substances.
Handpiece should be packed well and place at clean and dry room without dust, sulfur and salt.
Please do not touch the handpiece immediately after autoclaving.
 

You Might Also Like