Products

Tealth 1: 1 Low Speed Dental Handpiece External Water spray

China Tealth 1: 1 Low Speed Dental Handpiece External Water spray, Find details about China Dental, Dental Equipment from Tealth 1: 1 Low Speed Dental Handpiece External Water spray

Model NO.
1024CH(P)
Application
Adult, Child
Loading Way
Wrench Type
Head Diameter
Middle Head
Exhaust Way
Exhaust Outside
Number of Holes
Two Holes
Connection
Without Quick Connector
Rotating Speed
Low-Speed Handpiece
Noise
Less Than 70dB
Trademark
TEALTH
Transport Package
Plastic Box
Specification
Aluminum, stainless steel
Origin
China
HS Code
90184100
Model NO.
1024CH(P)
Application
Adult, Child
Loading Way
Wrench Type
Head Diameter
Middle Head
Exhaust Way
Exhaust Outside
Number of Holes
Two Holes
Connection
Without Quick Connector
Rotating Speed
Low-Speed Handpiece
Noise
Less Than 70dB
Trademark
TEALTH
Transport Package
Plastic Box
Specification
Aluminum, stainless steel
Origin
China
HS Code
90184100
Tealth 1: 1 Low Speed Dental Handpiece External Water spray
1024CH smooth external 1:1 contra angle
Model :1024CH

Features:
Push button , easily take it out , No fly out.
Diameter meter is φ2.35mm
External water spray system.
Smooth outlooking , conform to ergonomic design.

Instruction:
After each treatment,Sterilizing handpiece in autoclave according to the following steps:
1.Remove the bur and brush clean handpiece, clean outside of handpiece with an alcohol solution.
2.Lubricate handpiece, each times drop two drops inside of air inlet pipe.
3.Place into autoclaving pouch and mark.
4.Autoclave the handpiece for 12 min.At 135ºC.

Tealth 1: 1 Low Speed Dental Handpiece External Water sprayTealth 1: 1 Low Speed Dental Handpiece External Water spray
Operation Instruction:
It shall be sterilized before handpiece is used at the first time;Sterilization temperature is 135ºC and last for 12 minutes.
After using,Please follow the instruction to sterilize the handpiece:
1 extract the bur from the handpiece,use the soft brush to clean the dirt and wash with disinfection of alcohol cotton.
2 lubricate the handpiece,pour two drops into air tube one time.
3 wrap it with sterilization package and mark.

Please do not use the acid solution to scrub, inject or soak the handpiece.
Please do not autoclave the handpiece with residual chemical substances.
Handpiece should be packed well and place at clean and dry room without dust, sulfur and salt.
Please do not touch the handpiece immediately after autoclaving.

You Might Also Like