Blend Polyol for Refrigerator and Freezer
China Blend Polyol for Refrigerator and Freezer, Find details about China Blend Polyol, Polyether Polyol from Blend Polyol for Refrigerator and Freezer
Basic Info.
Model NO.
SDB40C/SDB40D
Core Density
38kg/M3
Compressive Strength
130cps
Application
Refrigerator and Freezer
Trademark
Shunda
Transport Package
Iron Drum
Specification
220kg/Drum
Origin
China
HS Code
39072090
Model NO.
SDB40C/SDB40D
Core Density
38kg/M3
Compressive Strength
130cps
Application
Refrigerator and Freezer
Trademark
Shunda
Transport Package
Iron Drum
Specification
220kg/Drum
Origin
China
HS Code
39072090
Product Desciption
Blend Polyol SD2401/SD2402
Home Appliances used Rigid PU Foam
SD2401/SD2402 is mainly used for thermal insulation layer of the refrigerator and freezer. SD2401 is designed for cyclopentane material as the physical blowing agent, while SD2402 is designed for 141b as the physical blowing agent. It used together with isocyanate(PM-200) to make rigid PU foam through PU injection foam machine. The foam produced has the characteristics as following:
ADDITIONAL INFORMATION
Mold temperature should be controled in 35 to 40 ºC, Temperature of Polymeric and polyol should be controled in 20 to 25 ºC.
Off mold time should be within 10-40 minutes according the customer's needs.
PACKING SPECIFICATION
220KGS/drum, Blue paint or Binc coating drums (Drum Weight: 18-23kg)
STORAGE RECOMMENDATIONS:
The blend polyol should be stored in the sealed container to avoid the absorption of water vapor. During the transportation, it should avoid serious shake and strong sunlight. It should be stored in ventilated place, avoiding light, water and fire.
Recommended storage temperature: 15~25ºC.
Shelf life: 12 months
SAFETY PRECAUTIONS:
Direct contact with D2401/SD2402 type blend polyol can lead to moderate eye irritation and mild skin irritation, which can cause skin allergies. Repeated inhalation of high concentration of volatile gas will cause respiratory allergy, and should be treated immediately. Anti- inflammatory and anti-allergic treatment measures should be taken.
Please be careful in the operation to prevent contact with the skin and splash into the eye, please wear the necessary protective equipment (gloves, protective goggles, working clothes, etc.).
Once splashed on the skin or the eye, rinse with water immediately for at least 15 minutes, and the skin is washed with soapy water. Please seek medical treatment immediately after swallowed.
Importance: The above mentioned are typical test values, and the specific data may vary slightly due to environmental conditions.For our products, the data are not legally binding.
Shunda Company founded in year 1996, is a leading manufacturer of rigid PU foam blend polyol System material, our annual sales reached 50,000 MT in the past three years. We have four
Manufacturer plants in Yantai, Linyi, Dalian and Chang chun with totally more than 400 employees by now. For over 20 years development, Yantai Shunda Polyurethane Co., Ltd has grown up into a modern joint-stock enterprise, which has the research, development, production and operation for the series of rigid polyurethane foam production. We are also the largest global distributor of MDI series of Wanhua Chemical. Depending on our own strong R&D capability, professional purchasing team, quality control ability and full MDI series product supply, we could supply all series of PU raw material to the internal and abroad customers and undertake the
engineering of the insulation project.
Yantai Sanjiang Chemical Industry Materials Co., Ltd is established in 2010 by Shunda Group as its
International sale company, its mainly engaged in Blend polyol, Polyetherpolyol, flameretardants, PU catalysts, Polymeric MDI and other raw materials which are widely used for the insulation of wall and roof building, coldstorage, ship, sandwichpanel, refrigerators, freezers, pipelines, garage door and etc.
Other unmentioned matters and TDS&MSDS.Please visit our official website shundapu.en.made-in-china.com
Or please contact us for information:
Home Appliances used Rigid PU Foam
SD2401/SD2402 is mainly used for thermal insulation layer of the refrigerator and freezer. SD2401 is designed for cyclopentane material as the physical blowing agent, while SD2402 is designed for 141b as the physical blowing agent. It used together with isocyanate(PM-200) to make rigid PU foam through PU injection foam machine. The foam produced has the characteristics as following:- Good flowing property
- The pore in the core of the foam is very less.
- Low thermal conductivity and so on.
| Physical Properities | Metric | Value | |
| Pentane | 141B | ||
| Thermal Conductivity (Average Temperature 10ºC) | W/(m.K) | 0.021 | 0.0195 |
| Compressive Strength | KPa | 130 | 110 |
| Dimensional Stability | -30ºC 24h | 1 1.5 | |
| 70ºC 24h | |||
| Core Density | kg/m3 | ≤38 | ≤35 |
Mold temperature should be controled in 35 to 40 ºC, Temperature of Polymeric and polyol should be controled in 20 to 25 ºC.
Off mold time should be within 10-40 minutes according the customer's needs.
PACKING SPECIFICATION
220KGS/drum, Blue paint or Binc coating drums (Drum Weight: 18-23kg)
STORAGE RECOMMENDATIONS:
The blend polyol should be stored in the sealed container to avoid the absorption of water vapor. During the transportation, it should avoid serious shake and strong sunlight. It should be stored in ventilated place, avoiding light, water and fire.
Recommended storage temperature: 15~25ºC.
Shelf life: 12 months
SAFETY PRECAUTIONS:
Direct contact with D2401/SD2402 type blend polyol can lead to moderate eye irritation and mild skin irritation, which can cause skin allergies. Repeated inhalation of high concentration of volatile gas will cause respiratory allergy, and should be treated immediately. Anti- inflammatory and anti-allergic treatment measures should be taken.
Please be careful in the operation to prevent contact with the skin and splash into the eye, please wear the necessary protective equipment (gloves, protective goggles, working clothes, etc.).
Once splashed on the skin or the eye, rinse with water immediately for at least 15 minutes, and the skin is washed with soapy water. Please seek medical treatment immediately after swallowed.
Importance: The above mentioned are typical test values, and the specific data may vary slightly due to environmental conditions.For our products, the data are not legally binding.
Shunda Company founded in year 1996, is a leading manufacturer of rigid PU foam blend polyol System material, our annual sales reached 50,000 MT in the past three years. We have four
Manufacturer plants in Yantai, Linyi, Dalian and Chang chun with totally more than 400 employees by now. For over 20 years development, Yantai Shunda Polyurethane Co., Ltd has grown up into a modern joint-stock enterprise, which has the research, development, production and operation for the series of rigid polyurethane foam production. We are also the largest global distributor of MDI series of Wanhua Chemical. Depending on our own strong R&D capability, professional purchasing team, quality control ability and full MDI series product supply, we could supply all series of PU raw material to the internal and abroad customers and undertake the
engineering of the insulation project.
Yantai Sanjiang Chemical Industry Materials Co., Ltd is established in 2010 by Shunda Group as its
International sale company, its mainly engaged in Blend polyol, Polyetherpolyol, flameretardants, PU catalysts, Polymeric MDI and other raw materials which are widely used for the insulation of wall and roof building, coldstorage, ship, sandwichpanel, refrigerators, freezers, pipelines, garage door and etc.
Other unmentioned matters and TDS&MSDS.Please visit our official website shundapu.en.made-in-china.com
Or please contact us for information:
You Might Also Like
Low Cost 2-8mm Coffee Husk Hen Feed Press for Pakistan
Nice Design 90km Mileage Electric Scooter with Front Basket
A356 Aluminum Sand Casting Parts
3-Blade Aluminum Outboard Propeller
Mercedes Benz W639 Vito Viano Air Compressor 6393200204 6393......
Made in China Metal Zinc Alloy Soft Enamel Sport Medallion C......
10t 30t 40t Locosc Shear Beam Weighing Load Cell for Weighbr......
4.1kwh Lithium Battery Wall Mount LiFePO4 24V 160ah Deep Cyc......
A3 Size DTG Tshirt Jeans Jackets Printer for Dark Light Colo......
PVC Co-Extrusion Foam Board with Cheaper Price
Superior Popular Art Fineliner Drawing Pen with Water Proof ......