Products

Ek6 Indoor High Voltage Earthing Switch

China Ek6 Indoor High Voltage Earthing Switch, Find details about China Ek6 Indoor High Voltage Earthing Switch, Ek6 24kv Grounding Switch Earthing Switch from Ek6 Indoor High Voltage Earthing Switch

Model NO.
Ek6
HS Code
8535210000
Model NO.
Ek6
HS Code
8535210000
Product Description

Ek6 Indoor High Voltage Earthing Switch

1) Description

Earthing switches of series EK6 are determined for indoor installation and conform to the require ments of IEC 62271-102. They are fitted with snap-action operating mechanisms for positive high-speed closing and sufficiently dimensioned to conduct the rated short-circuit making current when closed under load. The speed of the snap-action closing operation is independent controls.

The earthing switches are supplied as kits with a pre-assembled active part and correspon ding earthing con tacts supplied loose. Correct in stall ation of these parts in a switchgear panel results in a functioning earthing switch.
Routine tests to IEC 62271-102 arc to be carried out at site accordingly.
 
2) Technical data
 
Earthing switchPole cen-tresWeightRated VoltageRated impulse test voltageRated short-time currentRated short- circuit durationRated short circuit making current (For various feed directions)
Typp (mm)kgU(Kv)UI(kV)Ith(kA)tth (s)Ima (kA)Ima (kA)
EK6-R-1208-Z-150150111)127531.536580
EK6-R-1208-P-150150111)
EK6 - 1208  - 210210121)
EK6 -1208  - 275275131)
EK6 -1208  - 15015013
EK6 - 1208 - 21021014
EK6 - 1208 - 27527516
EK6 - 1212 - 21021031403-120
EK6 - 1212 - 27527531501-120
EK6 -2406 - 21021012241252535063
EK6-R-2406-Z-21021012
EK6-R-2406-P-21021012
EK6 - 2406 - 27527514
EK6 - 2406 - 21021014
EK6 - 2406 - 27527516
EK6 - 2406 - 21021014253-63
EK6 - 2406 - 27527516

3) Structure and function

Earthing switches of series EK6 have three pairs of earthing blades which are located on the operating shaft and are freely movable. The pairs of earthing blades are electrically connected to each other by a short-circuiting bridge and to earth potential at the bearing brackets by two stranded copper conductors. Driver levers and toggle springs located between the bearing brackets are used to transmit the force during the switching process. Fixing the active part on a torsionally rigid switchgear panel wall or cross beam provides it with the necessary stability.

The earthing contacts designed to suit the relevant switch type are to be bolted to the conductor bars supported on suitable insulating parts, e.g. pintype insulators or current transformers, on the opposite side and parallel to each other, and the position adjusted until it conforms to that show in the dimensional drawings.

The earthing switch has a snap action closing mechanism which functions independently of the rotation of the drive shaft. The switching speed and torque achieved in this process are independent of the actions of the operating mechanism.

In the opening process, in contrast, the toggle springs have no effect on the speed of contact separation. A ring lever or suitable manual or motorized operating mechanism with the necessary torque for the type of switch and an operating angle 90° can be fitted for operation of the switch.

Note:
Always open earthing switches by turning until the stop is reached.
The earthing switches can also be fitted with an auxiliary switch for annunciation purposes.
Ek6 Indoor High Voltage Earthing Switch
Figure 1: Example of the active part of an earthing switchmounted on a switchgear panel partition, shown in the open position.
1) Bearing bracket
2) Toggle spring
3) Short-circuiting bridge
4) Pair of earthing blades
5) Eathing conductor
6) Bevel gear mechanism (not belonging to the earthing switch)
7) Actuating shaft
8) Driver lever

ATTENTION:

1.The payment term: We accept TT,30% deposit and 70% balance against copy of BL.
2.The delivery time: Usually it will take about 15-20 days.
3.The standard of package: Usually use strong plywood case for protection.
4.The material of transformer: We have two types, one is with copper and another one is with aluminum. It depends on your requirement. In fact, those two have difference if normal work well. Only except the long life. Copper is better and also higher price.
5.The logo: If you have good quantity, it absolute no problem to do OEM.
6.Our market: our products are popular in Indonesia, Philippines, Russia, USA, Middle East and so on. Some of them are our regular customers and some of them are developing. We hope you can join us and make mutual benefit from our cooperation..
7.Warranty: in 12 month since BL date.

OUR SERVICE:

1.quick response in before sales period help you got order.
2.excellent service in production time let you know each step we made.
3.reliable quality solve you after sale headache.
4.long period quality warranty ensure you can buy without hesitate.


WHY CHOOSE ROCKWELL:

1. One-stop supplier globally.
2. More than 10 years professional experiences in electrical appliance industry. 
3.We offer professional online technology support for perfecting your electrical solution free.
4. Experienced sales service and suggestion.
5. All the products with accessories under strict quality control and final inspection before shipping.
6. We can assure the powerful competitive price and reliable quality products.
7. Most competitive shipping rate from our own shipping forwarder.
8. Warranty assurance: 12 month
9. Whatever big or small order, we can provide you one-to-one service.  

CONTACT US:

Contact person: Mr. Chen Chengming
Tel:86-577-27869969
Mobile:86-18668777248
 
Ek6 Indoor High Voltage Earthing Switch

Your Best Choice for Electrical Appliances Industry!!!
Please leave an inquiry to know more details about Price , Packing ,Shipping and Discount.

Ek6 Indoor High Voltage Earthing Switch
 

You Might Also Like