China Gas Powder Coating Curing Baking Oven, Find details about China Powder Coating Curing Oven, Powder Coating Drying Oven from Gas Powder Coating Curing Baking Oven
Gas Powder Coating Curing Oven
1.Introduction
This Powder coating oven used for curing the workpiece which has been spraying during the powder
coating. When a thermoset powder is exposed to elevated temperature, it begins to melt, flows out,
and then chemically reacts to form a higher molecular weight polymer in the surface of the workpiece.
Fan motor, Burner and PLC:
2.Drawing
4.Technical parameters
Inner Size | L3500mm*W2000mm*H1500mm | ||||
Outter Size: | L4700mm*W2250mm*H1750mm | ||||
Material: | t1.2mm galvanized plate | ||||
Thickness Insulation: | 120mm | ||||
Power supply: | GAS | ||||
Voltage: | 380V | ||||
Frequency: | 50-60Hz | ||||
Door type: | Double sided | ||||
Warm-up time: | 15 min. (180-220° C) | ||||
Homogeneity: | < ± 3°C if 185°C | ||||
Temperature stability: | < ± 1°C | ||||
Temperature max. | 230° C | ||||
Transport: | Top | ||||
Air circulation: | Forced | ||||
Band of burner: | Italian Riello | ||||
Model of burner | RIELLO 40 FS 20 | ||||
burner capacity: | 200,000 KCAL (81-220kw) | ||||
power of motor | 0.15KW | ||||
Total power of burner | 0.25KW | ||||
Warranty: | 12 Months |
5.Curing oven heating ( heating energy ) selection
Heating system classification
1. Gas hot air heating system ( full automatic ) ---- Which is preferred by box curing oven. Powder coating line continuous operation can also be selected ( Box furnace or powder coating line curing tunnel should choose gas system
2. Fuel hot air heating system ( full automatic ) ---- As oil prices rise, higher operating costs
3. Far-infrared radiation heating system ( full automatic ) --- Running costs are high, but the equipment investment is the most economical, especially small quantities spraying may be considered.