IEC60529 Ipx56 Test of Rain and Storm Simulation Rain Test Chamber

China IEC60529 Ipx56 Test of Rain and Storm Simulation Rain Test Chamber, Find details about China Ipx56 Rain Chamber, IEC60529 Rain Test Chamber from IEC60529 Ipx56 Test of Rain and Storm Simulation Rain Test Chamber

Model NO.
XB-OTS-P
Power
Electronic
Material
SUS 304 Stainless Steel
Trademark
OTS
Transport Package
Standard Strong Wood Case
Specification
W*H*D800*800*800mm(Customized)
Origin
Guangdong, China (Mainland)
HS Code
9031200000
Model NO.
XB-OTS-P
Power
Electronic
Material
SUS 304 Stainless Steel
Trademark
OTS
Transport Package
Standard Strong Wood Case
Specification
W*H*D800*800*800mm(Customized)
Origin
Guangdong, China (Mainland)
HS Code
9031200000
Test of Rain and Storm Simulation Rain Test Chamber

Introduction:
The Rain Test Chambers are designed for the simulation of rain / water spray with features like fully non-corrosive interior and exterior. Characteristic water flow patterns as per IPX1 - IPX8 and R1, R2, S1 & S2 standards.

Features:
Exterior with non-corrosive FRP (Fiber Reinforced Plastic).Interior with non-corrosive FRP (Fiber Reinforced Plastic) / stainless steel.Large capacity (100 Ltrs) water reservoir with automatic water refilling facility.Rotating test table to expose the specimen for spray from all sides.Rotating spray and rain nozzle arms are designed for JIS specification.The chamber is also designed for multiple tests as per different standardsDesigned for re-circulation of water for continuous tests.Required pressure regulators, flow meters & gauges for pressure and flow control of sprays.
Meeting Standard: 
IEC60529, IEC60598, IEC60335, IEC 60034-5:2000
IPX5, IPX6 original nozzle with an angle adjustable device.



2. Model:XB-OTS-IPX56

3. Uses:
Waterproof test system is according to IEC60529, IEC60598, IEC60335 and IEC 60034-5:2000. The IP-X includes the following test grades: IPX1, IPX2, IPX3, IPX4, IPX5, IPX6, IPX7 and IPX8 (Refer to page 51 of IEC60529). It is widely used in the authentication test organization for the products such as electrical & electronic products such as LED luminaires as well as in the relevant quality control department for the waterproof detection of the enclosures protection grades.

4.  the device consists of: respectively, by laboratory test bed, water tank, control box, product dehydration buffer, turntable, and sprinkler system.

 
  1. The main technical parameters:
 
Inner size1000 × 1000mm ×1000mm(L*W*H)
The sprinkler system: water pump, pressure gauge, stationary nozzle holder,


Nozzle Installation
Installed above the two nozzle heads. one piece IPX5 nozzle and one piece of IP6 spray nozzle.
10-120 ° angle adjustable  
Diametersix points
The inner diameter of orifice1 ~ φ6.3mm, IP5 (grade), 2 ~ φ12.5mm, IP6 (grade)
Water pressure100 ~ 150kpa (by flow regulator)
Spray flowIP5 (grade) 12.5 ± 1 (L / min),
IP6 (grade) 100 ± 5 (L / min)
The turntableφ500MM speed: 3 ± 1R / min
Water Duration3,10,30,9999min (adjustable)
Recyclingwater circulation system to ensure water recycling
By the waterthe top surface of the product
Water pressurewater pressure gauge, water pressure can be displayed
Supportas a test of tempered glass box outdoor waterproof wall, stainless steel square pass as a stent.
The control system Longhorn company developed touch-screen control system.
6. The structural principle:
The basic principles of the design of the device: a water tank located at the bottom right side of the control box by internal stainless steel pumps and pumping pressurized and then sent to the upper nozzle, spray nozzle perpendicular to the turntable on top of the sample, and then scattered the inside of the tank, thereby forming a water circulation system. Pump outlet design flow meters, pressure gauges, solenoid valves and other control components. Waterproof inner tank mounting speed dial on the control panel.

 
  1. Construction Material:
    1, nozzle: stainless steel tube
    2, water tank: SUS#304
    3, sealing plate material: Just lower glass 5MM thick glass top PC plastic transparent plate .
    4, frame material: 304 stainless steel square pass, sand surface,
IP56 water jet ways: sequentially spray, spray from the first to the last, and then from the last spray has been circulating since the test time to stop. Water flow can be observed.
 
  1. Safety devices:
  1.Power overload, short-circuit protection
  2.Ground protection
  3.Water protection
  4.Prompt information ring the alarm


XB-OTS-IPX34
The main technical parameters
ModelXB-OTS-800PXB-OTS-1000P
Internal Dim.W×H×D(mm)800×800×8001000×1000×1000
External Dim.W×H×D(mm)1250×1800×11001750×1850×1300
Water Temp.NormalNormal
Spray TypeTotal Water
 Flow
(L/min)
R11.8IP×1With in 1~1.5mm/min(In drip box)
R23.2IP×2With in 3~3.5mm/min(In drip box)
S124.5IP×3angle±600,R:400mm,1.1L/min
S239.2IP×4angle±1800,R:400mm,1.8L/min
Pressure of 
spray nozzle
(kgf/cm*2)
R10.11.Flow rate of the water=0.07L/min
2.1P×3,Radius:400mm,16Number or open
holes=16,total water flow:1:1L/min.
R20.33.1P×4,Radius:400mm,25Number or open
S11holes=25,total water flow:1:8L/min.
S23*Radius:200mm,R400mm.
(For 1P×3,1P×4 only)
(RPM)Test Specimen Frame17RMP1RPM
Spray Nozzle Rotation Speed23RPMPromote the pipe on both sides of the vertical line of 30 ° 
each time back and forth about four seconds to promote
Swing 60 ° from vertical for 4 seconds at one time
Promote the pipe on both sides of the vertical line of 180 ° 
for about 12 seconds to promote one round
Swing 180 ° from vertical for 12 seconds at one time
 
 
MaterialInteriorSUS#304
Exterior
Other ComponentsChamber lamp.WiperChamber lamp.Wiper,casters with Adjusters
casters with Adjusters
Power Source(K.W.)AC 1Ψ 220V 60/50Hz 4KW


Use:
Waterproof test system is according to IEC60529, IEC60598, IEC60335 and IEC 60034-5:2000. The IP-X includes the following test grades: IPX1, IPX2, IPX3, IPX4, IPX5, IPX6, IPX7 and IPX8 (Refer to page 51 of IEC60529). It is widely used in the authentication test organization for the products such as electrical & electronic products such as LED luminaires as well as in the relevant quality control department for the waterproof detection of the enclosures protection grades.

Company Advantage
Ø 24 hours online
Ø 35 years experiences
Ø Sample chamber of each model
Ø Best price, fast delivery
Ø OEM,ODM
Ø Oversea offices
Ø Own import and export business license
Ø  ISO,CE,UL,ASTM,DIN,EN,GB,BS,JIS,ANSI,TAPPI,AATCC,IEC,VDE

Customer Support Services
Ø Installation
Ø Training (Training customer employees)
Ø Calibration
Ø Preventative maintenance
Ø Replacement parts
Ø Assistance via phone or internet
Ø On-site diagnosis and repair/online diagnosis and repair
IEC60529 Ipx56 Test of Rain and Storm Simulation Rain Test Chamber

FAQ
 
1. How to choose the most suitable fitness equipment steel tensile testing machine?
 Our professional team will give you the best suggestion as long as you tell us what kind of test you need to do 
 and the required specification.
2. What's the delivery term?
 At most of time, we have stock in the factory. If there is no stock, normally, the delivery time is 15-20 working 
 days after deposit receipt. If you are in urgent need, we can consider making special arrangement for you.
3. Do you accept customization service?
 Yes, of course, we can not only offer standard machines, but also customized machines according to your 
 request. Don't hesitate to tell us your requirement, we will try our best to meet your needs.
4. Can we visit your factory before order?
 Yes, we warmly welcome and sincerely invite you or your team to visit our factory, we will help to arrange 
 hotel and pick up you from airport.
5. Do you have customers of our country before?
 Now our testing machines have been sold to more than 26 countries, like USA, Canada, Russia,UK, Italy, 
 Germany, European Union, India, Pakistan, Philippines, Singapore, Thailand and Vietnam, Iran, Brazil...and so 
 on.
6. How about your warranty?
 Generally, our warranty is one year. Within the warranty period, we can offer technique support and part parts 
 change, necessarily, our engineers may go to your place for better service.
7. How about the packing for machine, is it safely protected during transportation?
 Our machine is packed by standard export wooden box, it won't be damaged. We've delivered many testing 
 machines abroad by sea or by air without damage.
8. What is the order process?
 Inquiry - quotation - communication - order confirming - deposit payment - production - testing and debugging 
 - balance payment - packing - delivery - customer receiving - after service. 
9. How to install and use the product?
 The product is shipped with an operating instructions and video of English version.
IEC60529 Ipx56 Test of Rain and Storm Simulation Rain Test Chamber
IEC60529 Ipx56 Test of Rain and Storm Simulation Rain Test Chamber
IEC60529 Ipx56 Test of Rain and Storm Simulation Rain Test Chamber

Please tell me the test product,
Leave your email and informations,
Then Click the below "send"

I will give you the best service and surprice,try it?

Suki