China Manufacture Omp Hydraulic Motor Replace Danfoss Omp36/50/80/100/125/160/200/250/315/400 Hydraulic Motor, Find details about China Omp Hydraulic Motor, Omp Hydraulic Orbit Motor from China Manufacture Omp Hydraulic Motor Replace Danfoss Omp36/50/80/100/125/160/200/250/315/400 Hydraulic Motor
OMP | Max torque (N.m) | Speed Range (rpm) | Max pressure(MPA) | Max flow(L/min) | Max power (Kw) |
OMP-36 | 30 | 150-1300 | 11 | 55 | 5.6KW |
OMP-50 | 70 | 100-1000 | 14 | 50 | 5.6KW |
OMP-80 | 116 | 80-670 | 14 | 60 | 5.7KW |
OMP-100 | 140 | 80-540 | 14 | 60 | 5.9KW |
OMP-125 | 190 | 60-420 | 14 | 60 | 6.0KW |
OMP-160 | 250 | 50-340 | 14 | 60 | 6.2KW |
OMP-200 | 300 | 40-275 | 14 | 60 | 6.4KW |
OMP-250 | 380 | 30-200 | 14 | 60 | 6.7KW |
OMP-315 | 420 | 20-150 | 12.5 | 60 | 6.9KW |
OMP-400 | 410 | 20-120 | 10 | 60 | 7.4KW |
OMP Series Orbital Hydraulic Motor | |
Model | OMP36,50,80,100,125,160,200,250,315,400,500 |
Mounting Flange: | 1)Flange: 2 bolts Ø 13.5 Rhomb-flange, pilot Ø 82.5× 8 2)Flange: 4 bolts Ø 13.5 Rhomb-flange, pilot Ø 82.5× 8 3)Flange: 4 bolts 3/8-16 Square-flange, pilot Ø 44.4× 2.8 4)Flange: 4 bolts M10 Square-flange, pilot Ø 44.4× 2.8 |
Output Shaft: | 1)Shaft: Shaft Ø 25, parallel key 8X7X32 2)Shaft: Shaft Ø 25.4, parallel key 6.35X6.35X31.75 3)Shaft: Shaft Ø 25.4, splined tooth SEA 6B 4)Shaft: Short shaft Ø 25.4, parallel key6.35X6.35X31.75 5)Shaft: Shaft Ø 32, parallel key 10X8X45 6)Shaft: Shaft Ø 31.75, splined tooth 14-DP12/24 7)Shaft: Long shaft Ø 31.75, splined tooth14-DP12/24 8)Shaft: Shaft Ø 31.75, parallel key 7.96X7.96X31.75 9)Shaft: Cone shaft Ø 28.56, parallel key B5X5X14 10)Shaft: Cone shaft Ø 31.75, parallel key 7.96X7.96X25.4 |
Port and drain port: | 1) G1/2 Manifold Mount 4× M8, G1/4 2) M22× 1.5 Manifold Mount 4× M8, M14× 1.5 3) 7/8-14 O-ring manifold 4X5/16-18UNC, 7/16-20UNF 4) 1/2-14 NPTF Manifold 4X5/16-18UNC, 7/16-20UNF 5) PT(RC)1/2 Manifold 4xM8, PT(RC)1/4 |
Rotary direction | Standard Reverse |
Other | Special function |