Products

Double Conical Screw and Barrel for Amut Extrusion

China Double Conical Screw and Barrel for Amut Extrusion, Find details about China Screw and Cannon, Bimetallic Screw Barrel from Double Conical Screw and Barrel for Amut Extrusion

Model NO.
24/52-110/220
Trademark
OULIN
Origin
China
HS Code
84779000
Model NO.
24/52-110/220
Trademark
OULIN
Origin
China
HS Code
84779000
Detail Information For Double Conical Screw and Barrel for Amut Extrusion:

Application: for Amut extrusion

Customer's Requirement: good abrasive& corrosive resistance.

Screw's quality: bimetallic screw, base material: 38CrMoAlA, steel from BAOSTEEL company, 10%-15% tungsten carbide powder will be added at screw's alloy layer.

Barrel's quality: bimetallic barrel, base material: 38CrMoAlA, steel from BAOSTEEL company, we will weld alloy layer at barrel's extrude zone,  10%-15% tungsten carbide powder will be added.


Detail Information For All Brand Twin Conical Screw and Barrel:

Application:  
For the production of pipes, profiles, sheets, such as SPC floor, PVC wall board, PVC wood plastic, PE wood plastic, high molecular sheet, baking-free brick plate, high calcium plate, high calcium pipes, high calcium profiles, soft PVC sheet, PVC foam board, PP, PE, ABS, PVC, granulation and etc.

Specification:
24/52, 35/76, 45/90, 45/100, 50/105, 51/105, 55/110, 55/120,58/124, 60/125, 65/120, 65/132, 68/143, 70/135,70/140, 75/150, 80/143, 80/156, 92/188, 105/213,110/220 and others.

1: Factory can produce twin conical screw and barrel according to your drawings.
2: Engineer can be sent to your factory for measurement, company can produce screw and barrel for most extrusion brand.

Quality:
1: Nitriding quality------ base material: 38CrMoAlA(JIS SACM645)
2: Bimetallic quality-----Good abrasive& corrosive resistance.

Heat treatment:
Advance hardening and tempering
Nitriding treatment

Technical Parameters:
Nitriding depth: 0.50mm-0.80mm                                
Nitriding hardness: HRC56-58                          
Surface roughness: Ra 0.4                  
Screw straightness: 0.015mm  
Alloy layer depth: 2mm-3mm
Alloy layer hardness: HRC56-64 

OULIN SCREW:  YOUR LOYAL PARTNER FOR SCREW AND BARREL

Double Conical Screw and Barrel for Amut Extrusion
Double Conical Screw and Barrel for Amut Extrusion
 

You Might Also Like